Help Line: 1-800-263-2244
Ligne d’assista nce:1 -800-2 63-2 244
Mon-Fri , 9AM-5PM (E astern )
Du lundi au vendre di, de 9h 17h (h eure de l’Est)à
SANYO Canada Inc.
www.s anyo.c a
ENGLISH US-1~U S-27
FRANÇAIS FR -1~F R-27
SAFETY PRECAUTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUT ION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER(OR BACK). NO
US ER - SERV IC E ABLE PA RTS IN SIDE. R EFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.(The
Caution Marking and Rating Plate is located at the bottom
enclosure of the unit.)
DANGEROUS VOLTAGE
The lightning fash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage withi n the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user to the
prese nce of i mp ortant oper atin g and
maintenance (servicing) instructions in the
literature accompanying the appliance.
FCC WARNING:
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may caus e ha rm ful inter fe rence unles s th e
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
Changes or modifications to this unit not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
Shielded cables must be used this unit to ensure
compliance with Class B FCC limits.
Caution: To maintain compliance with the FCC’s RF
exposure guidelines place the base unit at least 20 cm
from the nearby persons.
Use only the supplied antenna. Unauthorized
antennas, modifications, or attachments could damage
the transmitter and may violate FCC regulations.
SURGE PROTEC TORS :
It is recommended to use a surge protector for AC
connection. Lightning an d power surges ARE NOT
covered under warranty for this product.
INFORMATION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio / TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANTES MESURES DE SÉCURITÉ
Certaines mesures de sécurité doivent être prises pendant
l’utilisation de matérial équipment afin de réduire les risques
d’incendie, de choc électrique et de blessures. En voici
quelquesunes:
1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac
à laver, dans un sous-sol humide ou près d’une piscine.
2. Éviter d’utiliser le équipment (sauf s’il s’agit d’un
appareil sans fil) pendant un orage électrique. Ceci
peut présenter un risque de choc électrique causé
par la foudre.
3. Utiliser seulement le cordon d’alimentation et le type
de piles indiqués dans ce manuel. Ne pas jeter les
piles dans le feu: elles peuvent exploser. Se conformer
aux règlements pertinents quant à l’élimination des
piles.
CONSERVER CES INSTRUCTIONS
US- 1
IMPORTANT SAFETY INSTRUCTIONS
1.) Read t hese instructions.
2.) Keep t hese instructions.
3.) Heed a ll warnings.
4.) Foll ow all instructions.
5.) Do not u se this apparatus near wate r.
6.) Clea n only with dry cloth.
7.) Do not b lock any ventilation open ings. Install in accordan ce with the manufacturer’s
instru ctions.
8.) Do not i nstall near any heat source s such as radiators, heat reg isters, stoves, or other
appara tus(including amplifi ers) that produce heat.
9.) Do not d efeat the safety purpose of t he polarized or grounding -type plug. A polarized plug has
two blad es with one wider than the othe r. A grounding type plug has two bla des and a third
ground ing prong. Th e wide blade or the third prong i s provided for you r safety. If the p rovided
plug doe s not fit into your outlet, con sult an electrician for rep lacement of the obsolete ou tlet.
10.) Pro tect the power cord from bein g walked on or pinched partic ularly at plugs, convenie nce
recept acles, and the point where th ey exit from the apparatus.
11.) Only use attachme nts/accessories speci fied by the manufacturer.
12.) Use o nly with a cart, stand, tripo d, bracket, or table specif ied by
the manu facturer, or sold with the app aratus. When a cart is used,
use caut ion when moving the cart/ap paratus combination to av oid
injury f rom tip-over.
13.) Unp lug this apparatus during l ightning storms or when unu sed for long periods of time.
14.) Ref er all servicing to qualifi ed service personnel. Ser vicing is required when the a pparatus
has been d amaged in any way, such as power-supply cor d or plug is damaged , liquid ha s
been spi lled or objects have fallen i nto the apparatus, the appa ratus has been exposed to rai n
or moist ure, does not operate norma lly, or has been d ropped.
15.) The app aratus sh all not be exposed t o drippin g or splashing and t hat no objects filled with
liquid s, such as vases, shall be plac ed on apparatus.
16.) Mai n plug is used as disconnect de vice and it should remain rea dily operable du ring inte nded
use. In or der to disconnect the appar atus from the mains complet ely, the mains p lug should
be disco nnected form the mains sock et outlet completely.
When usi ng your equipment, basic sa fety precautions should a lways be followed to reduce t he
risk of fi re, electric shock and inju ry to persons, including th e following:
17.) Avoid us ing a equipment during an ele ctrical storm. There may be a remote risk of
electr ic shock from lightning.
18.) Use o nly the power cord and batter ies indicated in this manua l. Do not dispose of batterie s
in a fire. They may explo de. Check with local codes fo r possible special dispos al instructions.
US- 2
In troduc tion
Thank you for choosing this S ANYO product which has been designed and manufactured to giv e
you many y ears of trouble-free serv ice.
Due to the relatively new concept of a standalone interne t r adio, please take tim e t o r ead thes e
instru ctions they have been writt en to ensure you get the very bes t from your purchase.
Patien ce
Intern et Radio is a fast-growing but young phenomenon, and is only going to get better as time
goes by. So metimes a conn ection, station, or network glitch may frustrate you, but working through
the issu e will be well worth the effort.
Reach us t oll-free Canada-wide at 8 00-263-2244, 9-5 easter n time, weekdays for assist ance.
Power so urce
●100-24 0V AC 60/50Hz.
Servic ing
●This uni t contains no user servicea ble parts. Refer to qualifi ed service personnel.
●Consul t your d ealer if you are ever in doubt abo ut the installa tion, oper ation or safety of this
produc t.
To oper ate the unit wit h the remote con trol, point the remote at the Re mote Sensor on the front o f
the main unit and press the appropriate button . The remote control has an effective operat ing
range of a pproximately 20 feet and an a ngle of no more than 30°.
NOTE: Br ight sunlight may interfe re with the operation of the re mote control.
Summary of Controls - Unit and Remote
Control
STAN DB Y/ONPress t o tu rn o n/off t he I nt ernet Radio
SEL EC T
SCROL L▲/▼
Bro ws e
Reply
Back
Internet Rad io mode
Turn the knob to c ha ng e options. Pr es s th e knob to SELEC T
Press ▲ o r ▼ to s el ect options w he n us ing the remot e co nt rol
No func ti on
For f ut ur e ap plication s. N o fu nction at pre se nt .No fu nc ti on a t present
Go ba ck t o pr ev ious menu pag e
Media Player m ode
Displ ay Q ue ue informat io n
P1
P2
P3
P4
P5
Press a nd h ol d to save Prese t st at ion P1, Press t o lo ad
prese t st at ion P1
Press a nd h ol d to save Prese t st at ion P2, Press t o lo ad
Prese t st at ion P2
Press a nd h ol d to save Prese t st at ion P3, Press t o lo ad
Prese t st at ion P3
Press a nd h ol d to save Prese t st at ion P4, Press t o lo ad
Prese t st at ion P4
Press a nd h ol d to save Prese t st at ion 5, Press to l oa d
Prese t st at ion P5
Pre vi ou s Tra ck
Play/ Pa us e
Next Tra ck
Repea t On /O ff,
Shuff le On/Off
Sto p
US- 7
Control
Internet Rad io mode
Media Player m ode
P6
P7
P8
SHIFT
Vol +/-
Seek ▲
Seek ▼
SLEEP
SNOOZ E
Most of the fu nctions of thi s unit can be operated by pressing the buttons on t he front panel or the
corres ponding buttons on the remo te control handset.
Press a nd h ol d to save Prese t st at ion 6, Press to l oa d
Prese t st at ion P6
Press a nd h ol d to save Prese t st at ion 7, Press to l oa d
Prese t st at ion P7
Press a nd h ol d to save Prese t st at ion 8, Press to l oa d
Prese t st at ion P8
Press s hi ft b utton then pr es s P1 t o change P1 or P5 ,
P2 or P6. .e tc
Incre as e vo lume by press in g +, D ecrease vol um e by p ressing -
Tune up FM radio s ta ti on by pressin g ▲, tu ne d own by
press in g ▼
Press t hi s bu tton to set the s le ep t imer (15/30 /6 0/ 90 min)
Press t hi s bu tton to turn on t he s no oze functio n (9 m in s)
Bro ws e
Display overview
Icons ar e displayed on the bottom row o f the display. The m eaning of these icons is expl ained
below.
Sleep timer.
Alarm set indicator
11:00
AM
Internet Radio
Snooze
Zz
Zz
Remark s:
Time will show in the middl e of display(at its maximum siz e)when unit is turned Off.
When uni t is turn ON, the time informat ion will be shown at the bottom o f the display.
Display list:
Stations
Media Player
Configure
Tuner
Auxiliary Input
Alarm Clock
US- 8
In stalla tion
If th is Int ernet radio has been moved from a cold place to a war m plac e, DO NOT plug it in f or 2-3
hours (e.g. from a cold car to a warm room). There i s a possibil ity that moi sture may have
conden sed i n the Internet radio, this can caus e damage to your Internet radio. To avoid damag e
please unpa ck your Internet radio and allow it to stand at room temperature fo r 2-3 hours be fore
use. This wi ll help any m oisture evapor ate and pre vent unnecessa ry damage to your Internet ra dio.
AC CONNE CTION
Unwind the AC cord and extend it to its full l ength. Inse rt the AC plug
into any convenient 100-240V 60/50Hz house hold outle t. Please note
that this unit is equipp ed with a p olari zed AC plu g which h as one blade
wider than the ot her. This is a s afety feature to r educe the likeli hood of
electr ic sho ck. This polarized AC plug will only fit in a pola rized A C
outlet . If you find that yo u cannot insert this p lug into your ou tlet, you
may ha ve an obsolete non polarized ou tlet. P lease do not try to defeat
this safety feature by using a non-polarized adapter or by filing the
wider bl ade to make it fit into your ou tlet. If this plug d oes not fit into
AC Plug
your ou tlet, you s hould contact a qualified lic ensed electri cian to
replac e your obsolete outlet.
IMPORTANT NOTES:
● Before m oving or lifting the unit, ma ke sure the AC plug is disconnec ted from the power source.
● In case of malfunction due to elec trostatic discharge, just reset the product (reco nnect of
power source may be req uired) to resume normal operation. Sh ould any trouble occur,
remove t he power source and refer to qu alified personnel.
● If there is a pow er failure or the AC cord is discon nected for a short period of time, the clock
time will not be kept. When the power is r esumed or the AC cord is connected again, the clock
time will be reset from the inter net connection. If the internet connecti on is down or not
availa ble the clock can be set manual ly.
RJ-45 JA CK (if not using a wireless rou ter)
Insert t he RJ-45 connector into the R J-45 jack on the unit.
AC Outlet
RJ-45 Jack
Bro adband mo dem
(with integra ted ro uter)
OR
Bro adband
service
Bro adband
service
Bro adband
modem
RJ-45 Connec to r
Route r
Conne ct e th ern et
Use a co mmercia lly avai lable straight LAN cable (Cat egory 5/CAT 5 or better with RJ-45
connec tor).
Do not plug-in an etherne t cable if intendin g to use a wireless network, to avoid confusion to the
circui try. If inten ding to use an eth ernet conne ction, attach c able to both m odem/wired router and
radio be fore powering up radio.
US -9
REMOTE C ONTROL BATTERY
1. P ress firmly on the batt ery cover and t hen rotate
it in counter clo ckwise dir ection, the cover will
come off.
2. Place the battery (CR2032) into the batter y
compar tment acco rding to the polarity mark ings,
with the “ +” sign facing up.
3. Place back the battery cov er, press down slightly
and rota te it in cl ockwise direction until it is firm ly
closed .
Note: R emove the battery fro m the remote c ontrol if
not i n use for a lon g period o f time . When the batte ry
become s wea k, the remote control wil l not fu nction
proper ly. Replace wi th new battery.
BATTERY PRECAUTIONS
Follow t hese precautions when usi ng a battery in this device:
1.
Warning -Danger of explosion if batte ry is incorrectly rep laced. Replace onl y w ith the same o r
equiva lent type.
2.
Use only t he size and type of battery spe cified.
3.
Be sure to follo w the cor rect pol arity when installing the battery as indicated in the Battery
Compar tment. A reversed battery may c ause damage to the device.
4.
If the devic e i s n ot to be used for a long period of time, remove the bat tery to preve nt damage
or injur y from possible battery lea kage.
5.
Do not try to recharge a batte ry not intended to be r echarged; it can overheat a nd rupture.
(Follo w battery manufacturer' s directions.)
6.
Batter y shall not be exposed to exces sive heat such as sunshine, f ire or the like.
** Battery Included **
Co nfigur e Menu
Choosi ng the opti on you want from the Configur e menu
1. Press t he SELECT but ton.
(Note: if yo u make a mistak e at a ny point, press the BACK button to go back to the p revious
screen .)
2. Turn the knob unti l 'Configure' is displaye d
3. P ress the SELECT button.
4. Turn the knob unti l the display shows the optio n you want.
5. P ress the SELECT button to choose the option shown on the display. The options are
explai ned below.
<Netwo rk Config>
Enable s you to scan ag ain for connection to another wirel ess netwo rk, or to manually
config ure the network pa rameters. Use th is if you t ake the Internet r adio to another building
where yo u want to use it.
<Versio n>
Displa ys the version numbers of the v arious parts of software on y our Internet radio.
US -10
<Upgra de Firmware>
Use this option to download new firmware for the radio from th e R eciva port al on the Intern et.
If ther e is ne w firmware ava ilable, then t he radio will p rompt you if you want to download it or
not.
Note, at this stage, yo u can press the radio's BACK button t o cancel the radios, beginnin g a
firmwa re upgrade. A f irmware u pgrade may take several m inutes, s o do not switch off the
power to the radio until the operation is complete otherwise the radio may bec ome
perman ently damaged.
<Langu age>
Allows y ou to change the display lang uage.
<Facto ry Reset>
Puts all the settings back to thei r def aults as they were when they left the factory. If y ou
perfor m a factory re set on your radio, you will lose all your presets and your wireles s n etwork
connec tion.
<Regis ter>
This wi ll displa y a key that can be used to regist er the radio (recommended) on the S ANYO
Reciva C ustomer portal: h ttp://www.reciva.com / . Registe ring enables you to request a
statio n or podcast to be added to just yo ur unit.
<Clock S et Up>
Select ing this option can set the clo ck of the unit.
IMPORTANT: the first t ime you connect this internet radio to AC outlet, this unit wil l
automa tically set the ti me zone to Zone 2 which is the initial d efault setting. If you do not live in
this time zo ne, you must change the default zone disp lay to your own zon e. You o nly do this
one time a nd the unit will remember the n ew default zone.
<Backl ight>
Select ing this option enables you t o choose the Internet radio 's backlight brightness .
1. After se lecting the 'Backlight' m enu item, the radio will disp lay its list of two menu modes:
● The 'active' state is w hen the unit is “ON”.
● 'Stand by' is the state when the radio h as been turned off.
2. Rotat e the knob to highlight the des ired menu mode and press SELE CT.
3. The radio will now d isplay the current backlight value for this menu mo de. You can alter this
value by r otating the knob to increas e or decrease it.
<WiFi St rength>
The strength of the WiFi signa l will be displayed. Str ength should be over 60% for stable
stream ing. Relocate this radio or re-orie nt the wireless rou ter, or buy a wireless booster if
necess ary.
In ternet R adio Co n necti on Requi remen t s
What you n eed before you can use your Internet rad io
Before y ou can use your Internet radi o, you need the following:
* A broadband Int ernet connection.
* If wireless operation is desired - a wireless access point (Wi-Fi) connected to your broad band
Intern et, preferably via a router.
* I f your wireless ne twork is co nfigured to use Wired Equiv alent Privacy (WEP) or Wi-F i
protec ted Access (WPA) data encryption then you ne ed to know the WPA passcode so you can
get the In ternet radio to communica te with the network.
* If you r wi reless network is config ured for “trusted produc ts” you will need to enter th e ra dio's
MAC address int o your wi reless access po int. To find th e radio's MAC address use menu items
as follo ws: Configure->Networ k Config->View Config->MA C Address
* To enter the MAC address into your wir eless access point, you must read the inst ruction s
suppli ed with the wireless access p oint.
The Interne t radio should work anywh ere w ithin the specified range of the wirel ess a ccess poin t
device .
Before y ou continue, make sure that y our wireless access point i s powered up and connected to
your bro adband Internet. To get this part o f the syste m working you must read the ins tructions
suppli ed with the wireless access p oint.
US -11
St eps for co nnect i ng your r adio to y o ur wire l ess net work
Step 1-P ower up the radio
First, connect the AC power. In use, the radio can be switched on or off with the standby button ,
the disp lay on the front of the radio wil l light up and say:
SANYO
After a fe w seconds, this will change t o show:
Initializing network
After a fe w seconds, this will change t o show:
< Scan for networks >
Enter network
View Config
Step 2 Sca n for a wireless network connection
When the d isplay says<Scan for netw orks>, press the SELECT button.
(Note: if you make a mistak e at any point, press the BACK button to go back to the previ ous
screen .)
The radi o will now scan for all availab le wireless networks and wi ll display:
Scanning
If it can' t find one then the display wil l say:
No networks
Found
If thi s happens then you will have to get yo ur wireless access point workin g. See the instruct ions
suppli ed with it.
When the rad io finds your wireless network, it displays the ESSID f or the access point on the
screen this is a name that is allocated to th e a ccess poin t b y the person who set up the network
for exam ple:
< My Home Network >
US -12
It i s possible , and in some locations highly likely, that your radio wi ll find more than one wireless
access po int, in which case you can cho ose which one you want to conn ect to. Turn the knob on
the radi o to see the ESSID of each access p oint the radio has found.
Step 3 Con nect to the wireless network
When t he ESSID for the acces s point you want is disp layed on the screen, press the SELECT
button . If your network is not config ured to need an encryption co de, the screen should say:
Connecting to network
Then:
Network OK
If the scr een displays either:
Enter WEP key
Or:
Enter WPA key
Then the networ k is using one of the encryption s ystems: Wired Equival ent Privacy (WEP) or WiFi Protected A ccess (WPA). You ther efore need to enter the correct WE P or WPA code or “Key”
into the r adio to get it to communicate w ith your network.
Only the person who set up the network in the first pl ace kno ws this code; if that person is not
you then y ou need to find out what it is.
After 3 seconds, the display goes into the cod e entry mode. To e nter the code , use the knob to
select each character of the code in turn , pressing the SELECT button after each character.
Note that WEP and W PA codes are sensitive to upper and lower case characters so you must
enter th em exactly.
Use the BA CK button to erase incorrec t characters.
After the final character, use the knob t o select the <END> character a nd pre ss the SELEC T
button .
The radio should n ow be able to connect to the network. I f the disp lay shows “Invalid key” or
“Netwo rk Error”, an incorrect pas sword has probably been ent ered.
US -13
Ch oosing a r adio st a tion to l isten t o
Quick- Listen: “WFUV” fo r Preset station 1 a nd “CKUA” for Preset station 2 were programmed at
the factory - 1 each fr om the US an d Canada fo r your immediate li stening enjoyment. ( You can
reset th em at any time. See page 15.)
Statio n searching: Follow next st eps.
1. Press t he SELECT but ton . Choose Stations and pre ss SELECT button.
(Note: if you make a mistake at an y point, press t he BACK button to go back to the previou s
screen .)
< Stations >
Media Player
Configure
2. Turn the k nob to choose from<Locati on> or <Genre>.
<Locat ion> enables you to cho ose from the radio stations pro vided by any country which you
choose f rom a list.
<Genre > ena bles you t o cho ose r adio stations acc ording to their content, for example Classic
Rock. Sp ort, News, etc.
3. P ress the SELECT button to choose the optio n you want.
<Locat ion>
1.Turn the kn ob until th e display shows the region you want (or sel ect 'All' t o display all
countr ies),
2. P ress the SELECT button.
3. Turn the knob unti l the display shows the count ry you want.
4. P ress the SELECT button.
5. Turn the knob unti l the display shows the stati on you want.
6. P ress the SELECT button and wait u ntil the radio connects to th at statio n.
Note that some rad io stations do not broa dcast 24 hours per day, and some stations are not
always o n line.
If this station has on demand content (that is, it gives the option of listen ing to programs which
have alr eady been broadcast), see “ Stations which enable you t o choose what you listen to”.
<Genre >
1. Turn the knob un til the display sho ws the type of content you want , then press the SELECT
button .
2. Turn the knob unti l the display shows the stati on you want.
3. P ress the SELECT button and wait u ntil the radio connects to th at statio n.
Changi ng the volume
When a radio station is playing, you can change the volume simply by using Volume + and
Volume buttons located on the unit or on the remote control. The vol ume bar will appear on
displa y to show the volume change lev el.
US -14
Preset ting your favorite intern et radio stations
Up to maxi mum 8 stations can be stored in m emory with this unit.
While a radio station is playin g, hol d down one of the preset button s (num bered 1 to 8) until the
screen s ays
Assigned to preset #
Where # is the number of the button you held down.
Preset s 1 and 2 were programmed at the fa ctory and can be reset.
To ass ign a ra dio statio n to one of the prese ts numbere d 5 to 8, press SHIFT and then press an d
hold one of th e preset keys. When you ar e using the rem ote contr ol, simpl y press and hold the
desire d preset number button.
Playin g a preset internet radio sta tion
When an i nternet radio i s playing, brie fly p ress the preset button (1 to 4) for the station you want
or al so pre ss SHIFT butto n for station 5 to 8. (Note , do not ho ld the button down. If you do the n
the stat ion currently playing wil l overwrite the one stored in t he preset; be careful.)
Reques ting an internet station that is curre ntly unavailable
If you wa nt to listen to a particular radio station which is curren tly not available online, you can
visit the Reciva website at ht tp://ww w.reciva.com/ and put in a request t o add the station to the
list.
Intern et stations which enable you to choose w hat you listen to
Some int ernet radio stations can pr ovide a number of options ass ociated with their statio n; for
exampl e, some stations enable you t o listen to programmes that h ave already been broadcas t.
When you s elect a radio station that ha s this facility, the station does not start p laying
immedi ately, but ins tead the display shows:
< Live >
On Demand
1. Turn the k nob to choose <Live> or <On Dem and>, then press the SELECT button.
If you cho ose <Live> then the radio pla ys the current output from th is station as normal.
If you cho ose <On Dem and> then more screens are dis played where you choose what you
want to li sten to.
What is d isplaye d will depend on the sta tion you have chosen t he followin g steps ar e only a
guide.
2. Wh en you choos e <On Demand>, the display s hows t he names of the programmes. Turn th e
knob to ch oose the program you want, th en press the SELECT button.
3. When you h ave chosen the programme you want to listen to, either it will just start playi ng, or
the display may s how a list of days for you choose from use the knob to s et the day the
progra me was broadcast, then pres s the SELECT bu tton.
4. After you have chosen the day, you may be able to cho ose th e Star t Time. Set the St art Tim e
using th e knob and press the SELECT button.
5. Progra mmes which en able you to choo se the time also en able you to fast -forwar d a nd rewind
to the p art you w ant while the radio is playing. Th e elapse time is displayed. Usi ng the Sk ip +
(P3) or Sk ip - (P1) button to skip forwar d or backward in 30 second inte rvals.
US -15
Tr oubles hooti n g
You may fin d it useful to visit the help sectio n on the webpage of our associates at Reciva:
http:/ /radio.reciva.com/
This model has a b uilt-in wire less interne t capability. If you have troubl e connecting to your
wirele ss network, these steps may h elp to resolve the problem:
1. Confi rm that a Wi-Fi conn ected PC can acces s the Internet (i. e. can browse the we b) using the
same net work.
2. Check that a DHCP server is availabl e, or that you ha ve configured a static IP address on the
radio. To configure the DHCP, you must read the instructions supplied with the wireless
access p oint.
3. Check that your firewall is not blocking any outgoing p orts. As a min imum the radio needs
access to UDP and TCP ports 80,554,175 5,5000 and 7070 . To configure the Access Port
Contro l, you must read the instruct ions supplied with the wire less access point.
4. Chec k your access p oint does not r estrict conne ctions to particular MAC addresses. You can
view t he radio's M AC address u sing the men u item Confi gure-> Netwo rk Config-> View
Config -> MAC address.
5. If y ou have an encrypted network, check that you have entered the correct key or passphrase
into the r adio. Remember that text- format keys are case sensit ive. See pages 19-20.
If your radio can connect to the network su ccessfully, but is unable to pla y particular s tations, it
may be due t o one of the following causes :
1. The station is not broadcas ting at this tim e of the day (remem ber it may be locat ed in a
differen t time zone ).
2. The station has reac hed the maximum allowed num ber of simultane ous liste ners.
3. The station is not bro adcasting anymore.
4. The link on the radio is o ut of date.
5. The Internet conne ction between the server (o ften in a different country) an d you is slow.
Try tur ning your radio off and on again. I f unsuccessful, unplug an d replug power cord. If still n ot
helpfu l, use a PC (if available) to che ck play back of the stream via th e broadcaster's web site.
If you can p lay back the station with a PC, u se the form at
http:/ /www.reciva.com/stat ions/add_station.as p to notify us so that we can chang e the stati on
data tha t is used by the radio.
Me dia Pla y er
NOTE: This function i s for more advanced users.
The built-in Media Player allows you to play unprotected aud io files (AAC, AIFF, MP3, RM,
WAV, WMA) including itunes , and playl ists (M3U) stored on a networked PC(not Mac). It has
been ver ified to work on Windows 2000 a nd Windows XP.
Set up you r Windows PC to allow the radio to ac cess your audio files via Windows Shares
1. Plea se ensur e that your P C is available on the network for your Internet radi o, then, using
Window s Explorer, locate the folde r where your audio files are st ored.
2. R ight click on the folder.
3. S elect 'Properties'.
4. C lick on 'Sharing '.
5. S elect “Share this folder on t he network” and “Allow netw ork user to change m y files”.
Locati ng audio fi les via Win dows Shar es
1. Power u p the radio.
2. Wait f or “Stations” to b e displayed on the radio , or press the BACK button repeate dly until
“Stati ons” is displayed.
TM
US -16
Loading...
+ 40 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.