TELESCOPIC WALL MOUNT
POA-WMST01
CONTENTS
•Telescopic wall mount POA-WMST01 (93-156 cm)
•Thread screws: 4 x M3, 4 x M4, 4 x M5, and 4 x M6
HINTS:
•PLEASE CHECK THE PRODUCT BEFORE INSTALLATIONS FOR ANY DEFORMATIONS OR MISSING PARTS AND CONTACT YOUR SUPPLIER FOR MAINTENANCE IF REQUIRED.
•CHECK THE USER MANUAL OF THE PROJECTOR TO SET THE PROJECTOR DISTANCE TO SCREEN.
•THE WALL MOUNT SHOULD ONLY BE INSTALLED BY A TRAINED SPECIALIST .
•THE MAXIMUM LOAD CAPACITY OF THE WALL MOUNT IS 20 KG.
•BE SURE THAT THE WALL MOUNT IS INSTALLED IN A SAFE POSITION ABOVE HEAD HEIGHT AND NOT OVER EXISTING PASSAGEWAYS.
•CHECK THE LOCAL/NATIONAL REGULATIONS IN PUBLIC/COMMERCIAL USED ROOMS.
INSTRUCTIONS FOR USE:
STEP 1: The telescopic wall mount should be fixed to the wall horizontally by a trained specialist using the right kind of screws according to the structure of the wall ( Figure 1a). Conceal the cables inside the cable duct and prevent the cables from damage during the process and be aware that the product is conductive, never use unisolated cables. ( Figure 1 b).Tighten the cable cover part with the plastic ring to the body of the wall mount ( Figure 1c).
Figure 1a
Figure 1 b
Figure 1c