SANYO PLVZ5 User Manual

Multimedia Projector

MODEL PLV-Z5

PLV-Z5BK

Owner’s Manual

2

Features and Design

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It uses built-in
multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.

◆ Short Throw & Wide-Range Zoom Lens

The 2x Short Throw & Wide-Range Zoom Lens is capable
of throwing a 100” diagonal image from a distance of 9.8’
(3.0 m) to 20.0’ (6.1 m).

◆ Lens Shift

The Lens Shift function provides a greater installation
flexibility. You can use the projector at desired places
without images being distorted (see page 15).

◆ Color Management

The Color management function allows you to adjust the
details of picture colors to suit your preference and viewing
environments (see pages 31 – 32).

◆ Twin Iris

The integration of the lens aperture and lamp aperture
enhances the contrast and depth of the projected image.

◆ Compatibility

The projector accepts signals from multiple sources:
computers, analog TV systems (PAL, SECAM, NTSC,
NTSC4.43, PAL-M, and PAL-N), component video, S-video,
RGB scart, and HDMI.

◆ Simple Computer System Setting

The Multi-scan system of the projector conforms to almost
all computer output signals quickly (see page 26).

◆ 16 : 9 Wide Screen

The wide LCD panels with 1280 x 720 resolution (16:9
aspect ratio) can project the image from component video
signals such as DVD players and HDTV devices in full
screen.

◆ Interlace-Progressive Conversion

High-quality picture technology is available that converts an
interlaced signal into a progressively-scanned one (see
page 29).

◆ Automatic Slide Shutter

The automatic slide shutter protects the lens from dust and
scratches. It opens and closes automatically as you press
the POWER ON/STAND-BY button.

◆ Wide Selection of Image Modes

You can select an ideal image mode for the viewing
environment or for your desired picture quality (see page

27). The four different kinds of images of your choice can
also be stored (see pages 28 – 32).

◆ Power Management

The Power management function reduces power
consumption and maintains the lamp life (see page 39).

◆ Logo

The Logo function allows you to customize the screen logo
(see page 38). You can capture an image for the screen
logo and use it for the starting-up display or between
presentations.

◆ Lamp Control

The brightness of the projection lamp can be selected (see
pages 22, 29).

◆ Multi-language Menu Display

Operation menu is available in 16 languages: English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian, Russian,
Chinese, Korean, and Japanese (see page 36).

◆ Selectable Setting Position

The Mounting function provides a proper image position
(up/down and left/right) depending on the setting position
of the projector such as ceiling mounting or wall-hanging
(see page 37).

◆ Tw o HDMI Terminals

The projector has two HDMI (High Definition Multimedia
Interface) terminals. Simple connection with digital
equipment is offered through these terminals.

✔Notes:

• The On-Screen Menu and figures in this manual may differ slightly from the actual product.

• The contents of this manual are subject to change without notice.

3

Table of Contents

TRADEMARKS

● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc.

● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.

● Each name of corporations or products in this owner’s manual is either a trademark or a registered trademark of its

respective corporation.

Features and Design . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . 3

To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Instructions . . . . . . . . . . . . . . . . . . . . 5

Air Circulation 6

Installing the Projector in Proper Position 6

Moving the Projector 6

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Part Names and Functions . . . . . . . . . . . . . . 8

Front 8

Back 8

Bottom 8

Rear Terminal 9

Top Control 10

Remote Control 11

Remote Control Operating Range 12

Remote Control Battery Installation 12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . 13

Positioning the Projector 13

Adjustable Feet 13

Connecting the AC Power Cord 14

Moving the Lens 15

Connecting to Video Equipment (Video, S-Video) 16

Connecting to Video Equipment (Component) 16

Connecting to Video Equipment (HDMI, RGB Scart) 17

Connecting to a Computer 17

Basic Operation . . . . . . . . . . . . . . . . . . . . . 18

Turning On the Projector 18

Turning Off the Projector 19

How to Operate the On-Screen Menu 20

Menu and its Functions 21

Zoom and Focus Adjustment 22

Remote Control Operation 22

Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Input Source and System Selection 24

Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Image Mode Selection 27

Image Adjustment . . . . . . . . . . . . . . . . . . . 28

Image Mode Adjustment 28

Picture Adjustment . . . . . . . . . . . . . . . . . . 33

Picture Position and Screen Adjustment 33

Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Screen Size Adjustment 34

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Setting 36

Information . . . . . . . . . . . . . . . . . . . . . . . . . .41

Input Source Information Display 41

Maintenance and Cleaning . . . . . . . . . . . . 42

Warning Indicator 42

Cleaning the RGB panels 43

Cleaning the Air Filters 45

Cleaning the Projection Lens 46

Cleaning the Projector Cabinet 46

Lamp Replacement 47

Lamp Replacement Counter 48

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Troubleshooting 49

Indicators and Projector Condition 50

Menu Tree 51

System Mode Chart 53

Technical Specifications 54

Configurations of Terminals 55

Optional Parts 55

Dimensions 56

4

To the Owner

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER’S MANUAL WITH
THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintain it in good condition for
many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections, and try
the solutions in the “Troubleshooting” section in the back of
this manual. If the problem still persists, contact the dealer
where you purchased the projector or the service center.

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

– This projector produces intense light from the projection

lens. Avoid staring directly into the lens as much as
possible, otherwise eye damage could result. Be especially
careful that children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may

result in fire hazard.

– Allowing the proper amount of space on the top, sides, and

rear of the projector cabinet is critical for proper air
circulation and cooling of the unit. The dimensions shown
here indicate the minimum space required. If the projector
is to be built into a compartment or similarly enclosed, these
minimum distances must be maintained.

– Do not cover the ventilation slot on the projector. Heat build-

up can reduce the service life of your projector, and can also
be dangerous.

– If the projector is unused for an extended time, unplug the

projector from the power outlet.

SIDE and TOP REAR

CAUTION

Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment.

READ AND KEEP THIS OWNER’S MANUAL FOR LATER
USE.

NOTE: This symbol and recycle system are applied to EU

countries only and not to the countries in the other area
of the world.

Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.

This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.

Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the
ceiling, clean the air intake vents, air filters,
and the top of the projector periodically
with a vacuum cleaner. If you leave the
projector unclean for a long time, the
cooling fans can be clogged with dust, and
it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO
PREVENT A BREAKDOWN OR DISASTER. IF THE
PROJECTOR COMES IN CONTACT WITH OIL OR
CHEMICALS, IT MAY BECOME DETERIORATED.

1.5' (50 cm)

3' (1 m) 1.5' (50 cm)

1.5' (50 cm)

5

Safety Instructions

All the safety and operating instructions should be read before
the product is operated.

Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage due to
lightning and power line surges.

Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the
manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer’s instructions, and should use a mounting kit
approved by the manufacturers.

An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.

The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.

This projector should not be placed in a built-in installation
such as a bookcase unless proper ventilation is provided.

Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air­conditioning equipment.

This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.

Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.

Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance, this indicates a need for service.

When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.

Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u

ze niet weggooien maar inleveren
als KCA.

NL

6

Safety Instructions

Moving the Projector

When moving the projector, make sure that the automatic
slide shutter is closed, retract the adjustable feet, and lock the
lens with the Lens Shift Lock to prevent damage to the lens
and cabinet.
When the projector is unused for an extended period, put it
into a suitable case.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces, or put other things on the
cabinet.

Do not tilt the projector more than 20
degrees from side to side.

Do not point the projector down to
project an image.

Do not put the projector on either side
to project an image.

Install the projector properly. Improper installation may reduce
the lamp life and cause fire hazard.

NO DOWNWARD

NO SIDEWARD

Installing the Projector in Proper Position

Openings in the cabinet are provided for ventilation. To ensure
reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered.

Air Circulation

Air Intake Vents

Exhaust Vent
(Hot air exhaust)

CAUTION

Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.

– Do not put any flammable objects or spray can near the

projector. Hot air is exhausted from the ventilation holes.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will become
hot while the projector is being used.

– Do not put anything on the projector. Objects put on the

cabinet will not only get damaged but also cause fire
hazard by heat.

Cooling fans are provided to cool down the projector. The
fan’s running speed is changed according to the
temperature inside the projector.

CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise damages or

malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about transporting the projector by courier or any other

transport service, consult your dealer.
– Do not put the projector in a case before it is cooled

enough.

20˚

20˚

7

Compliance

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the
fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is
detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible
on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow ············ Earth
Blue ································· Neutral

Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in
your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety
earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into
the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet,
contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

AC Power Cord Requirement

Federal Communication Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop operation of the equipment.

Model Number(s) : PLV-Z5, PLV-Z5BK
Trade Name : Sanyo
Responsible party : SANYO FISHER COMPANY
Address : 21605 Plummer Street, Chatsworth, California 91311
Telephone No. : [phone]

ASA

GROUND

8

SERVICEPORT

HDMI 1

COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO

Pb/CbYPr/Cr

Bottom

Back

!2 !3 !4

!5 Adjustable Feet
!6 Lamp Cover
!7 RGB Panel Cleaning Hole Cover

!1

!6

!5

!1 Terminals and Connectors
!2 Power Cord Connector
!3 Main On/Off Switch
!4 Air Intake Vents/Air Filters

✽ Kensington Security Slot

This slot is for a Kensington lock used to deter theft of
the projector.

*Kensington is a registered trademark of ACCO Brands Corporation.

q Exhaust Vent

Front

q

w

e r

yt

u

o

w Top Controls and Indicators
e Automatic Slide Shutter

r Projection Lens
t Focus Ring
y Zoom Lever
u Infrared Remote Receiver

i Vertical Lens Shift Ring (Up/Down)
o Horizontal Lens Shift Ring (Left/Right)
!0 Lens Shift Lock

!7

i !0

Air flow

Part Names and Functions

CAUTION

Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.

✽

9

Part Names and Functions

q COMPUTER

Connect the computer output signal, or RGB Scart 21-

pin video output to this connector (p.17).

Rear Terminal

SERVICEPORT

HDMI 1

COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO

Pb/CbYPr/Cr

q wte

y

VIDEO

Connect the composite video output signal from video
equipment to this jack (p.16).

e COMPONENT 1 or COMPONENT 2

Connect the component video output signal to these

jacks (p.16).

w S-VIDEO

Connect the S-Video output signal from video equipment

to this jack (p.16).

r SERVICE PORT

This jack is used to service the projector.

r

y

t HDMI 1/HDMI 2*

Connect the HDMI output signal from video equipment
to these terminals (p.17).

*Note on the HDMI connector:

Use the HDMI connector less than the size shown below.
Otherwise you cannot connect use HDMI 1 and HDMI 2
terminals at the same time.

WIDTH THICKNESS

Maximum dimensions of the HDMI connectors

0.94" (24 mm)

0.59" (15 mm)

10

Part Names and Functions

Top Control

qwer

t y u i

i INPUT button

Select an input source (p.24).

t MENU button

Open or close the On-Screen Menu (p.20).

e WARNING indicator

– Lights red light when the projector detects an

abnormal condition.

– Blinks red when the internal temperature of the

projector exceeds the operating range (pp.42, 50).

w

POWER indicator

– Lights red while the projector is in stand-by mode.

– Lights green during operations.

– Blinks red during the cooling-off period.

– Blinks green in the Power management mode (p.39).

– Blinks orange when the automatic slide shutter is

closed during operations (p.50).

u POINT ed7 8 buttons

Select an item or adjust the setting values in the On­Screen Menu, or use them to pan the image in the
Normal through mode (p.35).

y OK button

Execute the item selected or use it to access the
submenu items (p.20).

r LAMP REPLACE indicator

Lights yellow light when the projection lamp reaches its
end of life (pp.47, 50).

q POWER ON/STAND-BY button

Turn the projector on or off (pp.18, 19).

11

Part Names and Functions

Remote Control

qwe

!5

r LAMP CONTROL button

Select a lamp mode (pp.22, 29).

e LIGHT button

Light up the remote control buttons for about 10 seconds
(p.22).

w NO SHOW button

Temporarily turn off the image on the screen (p.23).

!3 COLOR button

Adjust the color intensity of a projected image (pp.23, 28).

q POWER ON/STAND-BY button

Turn the projector on or off (pp.18, 19).

!0

r

!4

u

!6

t

o

!2

!7

y

i

i BRIGHTNESS button

Adjust the brightness of a projected image (pp.23, 28).

!3

t MENU button

Open or close the On-Screen Menu (p.20).

y POINT ed7 8 buttons

Select an item or adjust the setting values in the On-Screen
Menu, or use them to pan the image in the Normal through
mode (p.35).

u SCREEN button

Select a screen size (pp.23, 34

).

o LENS IRIS button

Adjust the lens iris (pp.23, 29).

!0 INPUT buttons

Select an input source (p.24

).

!2 IMAGE buttons

Select an image level (pp.23, 27).

!4 CONTRAST button

Adjust the contrast of a projected image (pp.23, 28).

!5 IMAGE ADJ. button

Display the Image adj. Menu items one at a time and directly
adjust its image level (pp.23, 28).

!6 OK button

Execute the selected item or access the sub-menu items
(p.20).

!7 RESET button

Reset to the previous figure.
This function is limited to when selecting the Image
Adjustment (pp.28 – 31), Picture Adjustment (p.33) and the
Keystone function in the Setting (p.36).

!8

!8 FREEZE button

Freeze the picture on the screen (p.22).

!1 INFO. button

Display the input source information (p.41).

!1

To ensure safe operation, observe the following precautions:
– Do not bend, drop, or expose the remote control to

moisture or heat.

– For cleaning, use a soft dry cloth. Do not apply benzene,

thinner, splay, or any other chemicals.

LIGHT

LAMP CONTROL

LAMP

MENU

SCREEN

BRIGHTNESS

BRIGHT

LENS IRIS

IRIS

VIDEO

S-VIDEO

NO

SHOW

OK

IMAGE ADJ.

CONTRAST

CONT.

IMAGE

PRESET

COMPONENT

C1/C2

PC

INPUT

ON/STAND-BY

FREEZE

RESET

IMAGE

COLOR

USER

HDMI

H1/H2

INFO.

CXVT

12

Part Names and Functions

To insure safe operation, please observe the following precautions:

● Use two (2) AA or LR6 type alkaline batteries.

● Always replace batteries in sets.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid.

● Do not expose the remote control to moisture or heat.

● Do not drop the remote control.

● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

● Risk of explosion if battery is replaced by an incorrect type.

● Dispose of used batteries according to the instructions.

Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating
range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.

16.4’
(5 m)

60°

Remote Control Battery Installation

Remote Control Operating Range

Pull up the lid
and open it.

Open the battery
compartment lid.

Install new batteries
into the compartment.

Replace the compartment lid.

Two AA size batteries

For correct polarity (+ and –),
be sure battery terminals are
in contact with pins in the
compartment.

12 3

* When the batteries of the remote control are replaced, the remote

control code automatically returns to the initial code (Code 1) (p.39).

Remote control

13

Projection angle can be adjusted up to 7.7 degrees with the
adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper
height; to raise the feet, rotate the both feet clockwise.

1

Adjustable Feet

To lower or to retract the adjustable feet, rotate the both feet
counterclockwise.
Keystone distortion of the projected image can be corrected
by menu operation (p.36).

2

✔Notes:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

• All measurements are approximate and may vary from the actual sizes.

This projector is designed to project on a flat projection surface having a focus range of 3.9’ (1.2 m) to 30.2’ (9.2 m) at
maximum zoom and 7.9’ (2.4 m) to 30.2’ (9.2 m) at minimum zoom. Refer to the figure and table below for the screen size
and distance between the projector and screen.

30.2’ (9.2 m)

15.1’ (4.6 m)

9.8’ (3.0 m)

7.9’ (2.4 m)

Screen Size

(W x H) mm

16 : 9 aspect ratio

Zoom (min)

40”

Zoom (max)

886 x 498

7.9’ (2.4 m)

3.9’ (1.2 m)

80”

1771 x 996

16.0’ (4.9 m)

7.9’ (2.4 m)

100”

2214 x 1245

20.0’ (6.1 m)

9.8’ (3.0 m)

150”

3321 x 1868

30.2’ (9.2 m)

15.1’ (4.6 m)

300”

6641 x 3736

––-––

30.2’ (9.2 m)

(Inch Diagonal)

(Center)

Max. Zoom

Min. Zoom

3.9’ (1.2 m)

Adjustable Feet

Positioning the Projector

Installation

300”

40”

100”

80”

50”

40”

150”

75”

150”

14

Installation

HDMI 1

COMPUTER

CO

CO

S-VIDEO

HDMI 2

VIDEO

Pb/CbYPr/Cr

This projector uses nominal input voltages of 100 – 120 V or 200 –
240 V AC and it automatically selects a correct input voltage. It is
designed to work with the single-phase power systems having a
grounded neutral conductor. To reduce the risk of electrical shock,
do not plug into any other type of power system.
If you are not sure of the type of power being supplied, consult
your authorized dealer or service station.
Connect the projector with all peripheral equipment before turning
it on.

CAUTION

For safety, unplug the AC power cord when the projector is not
in use.
When the projector is connected to an outlet with the AC power
cord and the Main On/Off switch is on, it is in stand-by mode
and consumes a little electric power. Turn the Main On/Off
switch off when the projector is not in use.

Connecting the AC Power Cord

Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment and must
be easily accessible.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and a proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord
connector on your
projector.

Projector side AC outlet side

Ground

To the AC outlet.

(120V AC)

For Continental EuropeFor the U.S.A. and Canada For the U.K.

To the AC outlet.

(200 – 240V AC)

To the AC outlet.

(200 – 240V AC)

15

Installation

The projection lens can be moved up and down or left and right manually with the Lens Shift Rings, enabling you to adjust
the position of a projected image. After adjusting the position, lock the lens with the Lens Shift Lock.

V

V

uppermost

W

1/2W

Horizontal Lens Shift Ring
(Left/Right)

Move the projection lens to the left or right with the Horizontal
Lens Shift Ring.

Move the projection lens up or down with the Vertical Lens Shift
Ring.

Vertical Lens Shift Ring
(Up/Down)

V

V

W

1/2W

downmost

leftmost rightmost

Vertical Lens Shift (Up/Down)

Horizontal Lens Shift (Left/Right)

Moving the Lens

✔Notes:

• The best image is generally obtained at the central axis of the lens shift.

• With maximum lens shift in each direction, image distortion may be observed at the edge of the screen.

• With the maximum horizontal lens shift, the maximum vertical lens shift cannot be obtained, and vice versa.

• The Lens Shift Rings are locked at the factory. Make sure that the Lens Shift Lock is released before using the Lens Shift Rings.

Lens Shift Lock

Before using the
Lens Shift Rings,
make sure that this
lock is released.

16

Installation

SERVICEPOR

HDMI 1

COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO

Pb/CbYPr/Cr

Video Equipment

S-video
Cable

S-VIDEO

Output

S-VIDEOVIDEO

Composite

Video Output

Video Cable
(RCA x 1)

Video, S-video

Use a video cable or a S-video cable (commercially available).

Unplug the power cords of both the projector and external equipment from
the AC outlet before connecting the cables.

Video Equipment

Component Video Output

(Y, Pb/Cb, Pr/Cr)

COMPONENT

Component

Use a component cable (optional).

Connecting to Video Equipment (Component)

Component
Cable
(RCA x 3)

✔Notes:

• To order the optional cables, see page 55.

•When connecting HDTV equipment to the projector’s COMPONENT 1/2 terminals,
horizontal line noise may be noted only occasionally. Then adjust the value of Fine sync.
The factory default value of Fine sync is “10.” The setting can be adjusted from 0 to
+31 (see page 33).

This projector can be connected up to six equipment at one time. See the figures below for the connections.

Connecting to Video Equipment (Video, S-Video)

HDMI 1

S-VIDEO

HDMI 2

COMPUTER

VIDEO

Pb/CbYPr/Cr

COMPONENT 1

COMPONENT 2

SERVICEPORT

17

Installation

Connecting to a Computer

RGB Scart

Use a Scart-VGA cable (optional).

SERVICEPORT

HDMI 1 COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO Pb/CbYPr/Cr

Video Equipment

COMPUTER

RGB Scart

21-pin Output

Scart-VGA
Cable

SERVIC

HDMI 1

COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO

Pb/CbYPr/Cr

Video Equipment

HDMI

HDMI
Cable

HDMI

Use a HDMI cable (optional) for HDMI output.

Connecting to Video Equipment (HDMI, RGB Scart)

HDMI Video

Output

Unplug the power cords of both the projector and external equipment from
the AC outlet before connecting the cables.

✔Note:

• To order the optional cables, see page 55.

SERVICEPORT

HDMI 1 COMPUTER

COMPONENT 1

COMPONENT 2

S-VIDEO

HDMI 2

VIDEO Pb/CbYPr/Cr

COMPUTER

IBM-compatible or Macintosh computer

Monitor Out

Computer (Analog)

Use a VGA cable (commercially available) or a DVI-VGA cable
(commercially available).

DVI-VGA
Cable

VGA
Cable

Connect the projector’s AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.

Press the POWER ON/STAND-BY button on the top control or
on the remote control.

The POWER indicator turns green and the cooling fans start to
operate. As the automatic slide shutter opens, a preparation
display appears on the screen and the countdown starts.

2

3

1

4

After the countdown, the input source that was selected the
last time appears on the screen.

Tu r ning On the Projector

Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.

Selected Input Source

OFF ON

Main On/Off switch

18

Basic Operation

✔Notes:

• If the automatic slide shutter does not open properly, the projector will not be turned
on and the POWER indicator will blink orange. Press the POWER ON/STAND-BY
button again to restart.

• When “Countdown off” or “Off” is selected in the Display function, the countdown
will not be displayed on the screen (p.38).

• During the countdown period, all operations are invalid.

Top Control

NO

FREEZE

ON/STAND-BY

Remote Control

POWER indicator

POWER

ON/STAND-BY

button

Automatic Slide Shutter

Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.

Use this tab when handling manually.