Sanyo PLV-HD100,PLV-HD100 - 5500 Lumens Specifications

5500 ANSI LUMENS  24P TRUE HD 16:9 MULTIMEDIA PROJECTOR

Specifications

Resolution True High Definition (1920 x 1080)

PLV-HD100

Brightness 5500 ANSI Lumens (4-lamp mode)

2750 ANSI Lumens (2-lamp mode)

24P True High Definition Resolution

16:9 Multim edia LCD Projec t o r

Uniformity 90% (corner to corner)
LCD Panel System 1.65” TFT polysilicon type w/micro lens x 3
Number of Pixels 6,220,800 (2,073,600 x 3)
Contrast Ratio 1,000:1 (Full on/off)
Projection Lens Lens Sold Separately
Image Size Dependent on Lens
Aspect Ratio 16:9
Throw Distance Dependent on Lens
Zoom/Focus Dependent on Lens
Throw Ratio Dependent on Lens
Zoom Ratio Dependent on Lens

24P TRUE HD RESOLUTION PROJECTOR

The PLV-HD100 utilizes three true high definition resolution
(1920x1 0 80) LCD pa ne ls t o reproduce hi gh d efinition so urc es as
they were meant to be seen. The PLV-HD100 provides 24P
capability for film playback situation.

OUTSTANDING CONTRAST RATIO – 1000:1
Through its new high-contrast optical system, utilizing micro lens
technol o gy , the P LV- HD100 is abl e t o ac hi ev e an outs t a nd in g
contrast ratio of 1000:1. A micro lens is integrated into each
indivi du al pix e l on th e t hre e LC D pa ne ls inc reas ing light
efficiency, resulting in significantly brighter images.

5500 ANSI LUMENS
Utilizing four high-output 250 watt UHP lamps as its light source,
the PLV-HD 1 00 delivers an inc redible 55 00 A NS I lu m ens of
brightness.

SUPERIOR COLOR REPRODUCTION

The PLV-HD100 provides superior color purity with SANYO’s
6500º K color temperature optical system and superb HDTV
image performance through a newly developed 12-bit
Progressive Scan integrated circuit. As a result of 30-bit color
process i ng (1 0bit each for R/G/B), 2-3 pull do w n an d 10 80i to
progress iv e convers io n, t h e reproducti on of m ov in g im ag es is
highly i mpr ov ed .

CUSTOMIZABLE START-UP LOGO
The PLV-HD100 can capture logo files to display during the
projector’s countdown sequence at startup.

EFFICIENT LAMP MANAGEMENT SYSTEM
Monitors the status of each lamp and can display status and
cumulat iv e hours of use on-scre en. When full bri g htness is not
required, two of the lamps may be switched off. Also, if a lamp
expires while either four or two lamps are in use, the fail-safe
operatio n f e ature switc hes to th e ma t c he d pa ir of go od la m ps .

PRESENTATION TECHNOLOGIES

21605 Plummer Street

Chatsworth, CA 91311

Ph: 888-337-1215 (toll -fr ee)

Fax [phone]

www.sanyolcd.com

Power Lens Shift Up/Down Ratio 7:-1 – -1:7 or 8:1 – 1:8 or 1:1

Left/Right Ratio 3:2 – 2:3

Digital Keystone Correction No
Projection Lamp 250W UHP x 4
Scanning Frequency H Sync: 15-120kHz, V Sync: 50-120Hz
Dot Clock 230MHz
Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43
Computer Compatibility True HD, UXGA, SXGA, XGA, SVGA, VGA, MAC
Voltage 120-240V AC 50/60 Hz (auto sense/select)
BTU Rating 5118
dB Rating 46.0
Power Consumption 1500W
Dimensions (WxHxD) 22.9”x9.9”x30.8”
Net Weight 84.0 lbs.
User Maintenance Clean air filters, replace lamp assembly
Detachable Input Panels
Input 1

Dual SDI Input (HD/SD SDI) / SDI Output

(POA-MD17SDID)
Input 2
(POA-MD16VD1)

Input 3
(POA-MD18DVI)

RGBHV & Component (BNC x 5) • Left and Right Aud io

(RCA x 2) • Control (Min DIN 8-pin)

Digital Visual Interface (DVI-I w/HDCP) • Left & Right

Audio (RCA x 2) • Control (Min DIN 8-pin)

Input 4 Open
Fixed Input/Output Panel Serial in & Serial out (D-Sub 9 x 2) • Audio out (RCA x 2)

• USB (type B) • Wired RC jack (Stereo mini)

Included Accessories Wired/Wireless I/R Remote Control with Mouse Pad and

Laser Pointer • AC power cord • Wired remote cable

• PS/2, Serial, MAC Control cables • Real Color

Manager CD-ROM • Lens Mount Adapters (POA-LNA02

& POA-LNA01) • 2 “AA” batteries • Light Block Sheets

• Dust cover • Owner’s manual

Optional Accessories POA-MD08HD - HD-SDI Input Board

POA-MD13NET2 - Network Board
POA-MD09VD3 - Faroudja™ Input Board
POA-MD04VGA - D-Sub15 Input Board
POA-MD03VD2A - Video Y/C & S-Video Input Board
POA-LNA02 - Lens Mount Adapter (LNS-W02/M01/S01)
POA-LNA01 - Lens Mount Adapter (for all other lenses)
6103051130 - Replacement Lamp
PLC-CSE14 - Hard Shipping Case

Warranty Three years parts and labor; 90 days original lamp;

Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations

Quick Repair Program under warranty

Lens Specifications

Type Short

Part No.
Zoom
Throw Ratio
F Stop
Lens Shift
Weight

Issued 4/06 © 2006 SANYO

Fixed

LNS-W01 LNS-W02 LNS-W03 LNS-W04 LNS-W06 LNS-S02 LNS-S03 LNS-M01 LNS-T01 LNS-T02 LNS-T03

No Yes (power)

1.2:1 1.35 – 1.8:1

2.5 2.5 – 2.9 2.6 1.7 – 2.3 2.3 – 2.8 2.0 – 2.3 1.7 – 2.6 2.0 – 2.6 2.0 2.0 – 2.9 2.2 – 2.5

8:1 – 1:8 8:1 – 1:8 1:1 8:1 – 1:8 8:1 – 1:8 7:-1 – -1:7 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8

12.8 lbs. 5.5 lbs. 6.6 lbs 6.2 lbs. 6.6 lbs. 4.2 lbs. 8.2 lbs. 4.2 lbs. 8.4 lbs. 6.8 lbs. 16.1 lbs.

Short

Zoom

On-Axis

Short Fixed

No Yes (power) Yes (power) Yes (power) Yes (power) Yes (power)

0.8:1 1.5 – 2.0:1 1.1 – 1.5:1 2.0 – 2.6:1 2.6 – 3.5:1 3.5 – 4.5:1 7.0:1 4.6 – 6.0:1 6.2 – 9.0:1

Short

Zoom

Short

Zoom

Standard

Zoom 1

Standard

Zoom 2

Semi-Long

Zoom

Long

Fixed

NO Yes (power) Yes (power)

Long Zoo m

Long Zoo m