Sanyo PLL405WP-B0X1 Instruction Manual

INSTRUCTION MANUAL

PLL405WP-B0X1

40inch Multimedia LCD monitor
with Network-PC

ENGLISH

n We reserve the right to change specifications without notice.

n All trademarks used in this user manual are the property of their respective owners.

n This manual is printed on recycled paper.

FCC DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for Class A Personal Computers and

peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the device is operated in a residential environment. This device generates,

uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. Operation of this device in a residential area is

likely to cause harmful interference in which case the user will be required to correct the interference at his

own expence.

CAUTION Changes or modifications not expressly approved by manufacturer could void the users

authority to operate the device under FCC compliance regulations.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

CANADIAN NOTICE

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/

EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

WARNING This is a class A product. In a domestic environment this product may cause radio inter-

ference in which case the user may be required to take adequate measures.

ENGLISH

FOR YOUR SAFETY ................................................................ 1

SAFETY PRECAUTIONS ................................................... 1

SPECIAL NOTES ON LCD MONITORS ............................... 3

CLEANING ......................................................................... 3

BEFORE YOU OPERATE THE MONITOR .................................. 4

FEATURES ......................................................................... 4

CHECKING THE CONTENTS OF THE PACKAGE ............... 4

INSTALLATION .................................................................. 5

CONTROLS AND CONNECTORS ...................................... 6

CONNECTING YOUR MONITOR ........................................ 7

BASIC OPERATION ............................................................ 8

TROUBLE SHOOTING .............................................................. 9

APPENDIX ................................................................................ 10

SPECIFICATIONS ............................................................... 10

DIMENSIONS ...................................................................... 11

CONNECTOR PIN ASSIGNMENT ........................................ 11

TABLE OF CONTENTS

ENGLISH

STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor

and contact your dealer immediately. Further use may be dangerous and can cause fire or electric

shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of

fire or electric shock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug

your monitor immediately and contact your dealer. Using the monitor with any object inside may

cause fire, electric shock or damage.

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric

shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will

cause malfunction and may cause fire or electric shock.

PROTECT THE CABLES

Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy

objects on the cables. If damaged, the cables may cause fire or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in

power may cause malfunction. It is also advised not to touch the plug in these circumstances as it

may cause electric shock.

FOR YOUR SAFETY

WARNING

SAFETY PRECAUTIONS

1 FOR YOUR SAFETY

ENGLISH

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky

areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun

shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not

place any heavy objects on the monitor, and that all cables are routed such that children may not pull

the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause

fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.

Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand

is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or

on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal

cable is disconnected. If you do not disconnect them, it may cause fire or electric shock. It is

recommended that two people are used when moving the monitor.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid

accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself

as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

DO NOT TURN ON AND OFF THE POWER FREQUENCY

Do not alternate between turning the power ON and OFF frequency as it may cause damage.

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.

When using the monitor over a prolonged time, a ten minute break every hour is recommended as

looking at the screen continuously can cause eye strain.

OTHERS

FOR YOUR SAFETY 2