Sanyo PLC-200P, PLC-200PB, PLC-200PP Service Manual

Page 1

SERVICE MANUAL

Liquid Crystal Colour Video Proiector

Model No. PLC-200P (Europe, Asia, Africa, M.E.) Model No. PLC-200PB (U.K.) Model No. PLC-200PP (Australia, NewZealand)

FILE NO. 0-1857

Safety Instructions
Specifications ······3
Fundamental Principles of
Liquid Crystal Projector4
System Control ·····5
Description of PLC-200P/PB/PP ······6
Troubleshooting Chart 14
Lamp Replacement ····· 18
Mechanical Disassemblies 19
LCD Panel Replacement 26
Optical Adjustments 28
Convergence Adjustments ······ 31
Cleaning Methods 33
Service Adjustments 35
Chassis Electrical Parts List 41
Cabinet Parts List 55
Voltage & Waveforms 61
Block Diagrams 71
Schematic Diagrams · 72
Component and Testpoint Locations ··· 88

PRODUCT CODE E5SA(PLC-200P); 1113 143 00 E5SB(PLC-200PB); 1113 143 01 E5SC(PLC-200PP); 1113 143 02

ORIGINAL VERSION

Service	PLC-200P-00
Ref. No.	PLC-200PB-00
	PLC-200PP-00

REFERENCE NO. SM520033

Downloaded from www.Manualslib.com manuals search engine

Page 2

SAFETY INSTRUCTIONS

SAFETY PRECAUTIONS

WARNING: The chassis of this projector is isolated (COLD) from AC line by using the converter transformer. Primary side of the converter transformer and lamp power supply unit circuit is connected to the AC line and it is hot, which hot circuit is identified with the line in the schematic diagram. For continued product safety and protection of personnel injury, servicing should be made with qualified personnel.

The following precautions must be observed:

1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service is performed on the projector.

2. Comply with all caution and safety - related notes provided on the cabinet back, cabinet bottom, inside the cabinet or on the chassis

3. When replacing a chassis in the cabinet, always be certain that all the protective devices are installed properly, such as control knobs, adjustment covers or shields and barriers.

DO NOT OPERATE THIS PROJECTOR WITHOUT THE PROTECTIVE SHIELD IN POSITION AND PROPERLY SE-CUBED.

4. Before replacing the cabinet cover, thoroughly inspect the inside of the cabinet to see that no stray parts or tools have been left inside.

Before returning any projector to the customer, the service personnel must perform the following safety checks and be sure that it is completely safe to operate without danger of electrical shock.

PRODUCT SAFETY NOTICE

Product safety should be considered when a component replacement is made in any area of the projector. Components indicated by a mark (A) in the parts list and the schematic diagram designate components in which safety can be of special significance. It is, therefore, particularly recommended that the replacement of these parts must be made by exactly the same parts.

" SERVICE PERSONNEL ---- WARNING " and the following or the equivalent : " Eye Damage May Result From Directly Viewing The Light Produced By The Lamp Used in This Equipment.

Always Turn Off Lamp Before Opening Cover. Ultraviolet Radiation Eye Protection Required During This Servicing. "

Never turn the power on without the lamp to avoid electric - shock or damage of the devices since the stabilizer generates high voltages(10kV - 15kV) at its start.

Since the lamp is very high temperature during units operation replacement of the lamp should be done at least one hour after the power has been turned off, to allow the lamp cool – off.

Page 3

SPECIFICATIONS

Projector Type	Portable LC colour video projector
Dimensions (H x W x D)	253 mm x 268 mm x 572 mm
Net Weight	12.0 kg (26.4 lbs)
LCD Panel System	3.1" TFT Active Matrix type (Thin Film Transistor) x 3
Number of Pixels	331,350 (110,450 x 3)
Colour System	4 colour system (PAL, SECAM, NTSC4.43 and NTSC)
Projection Image Size (Diagonal)	63 cm to 762 cm (25 to 300 inch) Adjustable
Contrast Ratio	100 : 1
Horizontal Resolution	450 TV lines
Projection Lens	f4.2 ~ 4.5 lens with 135 mm ~ 270 mm Motor-drive zoom and focus
Lens Aperture	67 mm
Throw Distance	2.3 m ~ 13.4 m
Projection Lamp	Metal Halide, 160 watt
Projection Mirror	Dichroic mirror system
AV Input Jacks	PHONO Type x 1 (Video, Audio R and L), DIN 4 pin (S-Video) x 1 and 21 pin (SCART) x 1
Audio Monitor Output Jacks	PHONO Type x 1 (R and L)
Built-in Speaker	3W RMS
Image Elevation Adjustment	Up 5°, Down 5°
Voltage	220 ~ 240V AC, 50/60Hz
Power Consumption	240 Watts
Operating Temperature	5°C ~ 35°C
Storage Temperature	–10°C ~ 60°C
Remote Control Battery	AA,UM3 or R06 type x 3
Standard Accessories	Remote Control Unit, R/C Cable (1.5m), AC Cord Owner's Instruction Manual, Protective Dust Cover

Page 4

FUNDAMENTAL PRINCIPLES OF LIQUID CRYSTAL PROJECTOR

The white light from the light source is separated into red (R), green (G), and blue (B) light components by dichroic mirror, and each of these is projected onto three liquid crystal panels.

The three liquid crystal panels are driven by the primary color signals R/G/B, and R/G/B images are reproduced by the shutter operation of these liquid crystal panels. These reflections are condensed by lens and projected onto the screen.

The structure of the liquid crystal projector is shown in the diagram. The ultraviolet and infrared rays are cut out from the light beams given off from the metal halide lamp, which is the light source, by UV cut filter and cold filter at the beginning. This is to eliminate unnecessary light components in the projected images, and serves to protect the liquid crystal panel from the light and heat of the lamp.

The light beam, now made up only of visible light components, next undergoes spectral diffraction of the red light by the dichroic mirror used for the selecting out of red. The spectrally diffracted red light is reflected by the aluminum full reflection mirror, is projected onto panel unit R, and here the red component image is formed.

The light beam, with the red light having been separated out, next undergoes spectral diffraction of the green light by the dichroic mirror used for the selecting out of green. The spectrally diffracted green light is projected onto panel unit G, and here the green component image is formed.

The images formed on panel units R and G are mixed together by the dichroic mirror used for green mixing.

After spectral diffraction of the red and green light, the light beam (blue light) is projected onto panel unit B, and here the blue component image is formed.

The image formed on panel unit B, after being reflected by the aluminum full reflection mirror, is mixed with the red and green fused image by the dichroic mirror used for blue mixing. The mixed image is thereupon projected onto the screen through a lens.

Liquid crystal projector conceptual diagram

Page 5

SYSTEM CONTROL

All systems are controlled by IC801 (CPU).

Main functions: 1 Power ON/OFF.

T. Power On/OFF
2. Input selection.
3. Digital control.
4. On screen display.
5. Volume control.
6. Lamp monitor (Standby).
7. Temperature monitor (Temp. Warning).
8. Lamp replacement monitor (Lamp replace).
9. Zoom and Focus motor control.

1. Power ON/OFF.

CPU controls the power relay by a signal from the unit or the remote control.

2. Input selection.

Input selection will be switched from AV1 -> AV2 -> RGB -> AV1 by the V.MODE button on the unit or remote control. During this operation "V.MODE" will be shown on the right corner for 5 seconds. When you turn on the power switch, the lamp is not stable yet and the indication will be shown for 30 seconds.

3. Digital control .

Digital control will be switched from COLOUR -> TINT-> CONTRAST-> BRIGHTNESS-> SHARPNESS -> SOUND by pressing the FUNCTION button. After these selections, level can be adjusted by LEVEL button. Indication on the screen will be off after 8 seconds. When you press "NORMALIZATION" button, "NORMALIZATION" will be shown on the screen and all digital controls will be switched back to the factory setting. "NORMALIZATION" indication will be shown for 5 seconds.

4. On screen display.

All functions will be shown on the screen. Signal will be output from CPU and combined at signal circuit.

5. Volume control.

Volume will be adjusted by the buttons on the unit and remote. The indication will be shown for 5 seconds. The sound will be muted by the mute button and the indication will be changed to red color for 5 seconds.

6. Lamp monitor.

This unit uses a metal-halide arc lamp. This lamp is operated at high voltage. 10 kV~15 kV will be used at striking and 80 V after lamp is on. This lamp generates heat and needs cooling. After turning off the lamp, the cooling fan continues to run for one minute to cool down the lamp. This is required to reduce the gas pressure inside the lamp. During this period, the lamp can not be turned on. The green LED will not be on for one minute after turning off the lamp. After one minute the indicator will be on and the lamp is ready to start again.

7. Temperature monitor.

When the temperature rises due to an inoperative fan or poor ventilation, the power will be automatically turn off and the red LED Indicator will light. The temperature is monitored by a bi-metal temp. sensor.

8. Lamp replacement monitor.

The lamp has a life. The orange LED indicator will inform you of the recommended replacing time . The Indicator will be lit after 1000 hours of use.

Note: Projectors with the following serial numbers are set to 2000 hours. The serial No. is shown on the rating plate.

MODEL NO.	SERIAL NO.
PLC-200P:	G2601001 ~ 1010, G2701011 ~ 1340,
	G2801341 ~ 1650
PLC-200PB:	G2801001 ~ 1050
PLC-200PP:	G2701001 ~ 1060

Accumulated time will be stored in NON-VOLA memory (IC803) by CPU (IC801), and this information is not erased after the power cord is unplugged. After replacing the lamp, RESET switch should be set. This switch is only activated when Power is on. "RESET" indication will be shown on the screen. Do not press this RESET switch other than replacing the lamp. In the case of replacing control unit for repairing NON-VOLA memory IC (IC803) should be used continually.

9. Zoom and Focus motor control.

Two DC motors are attached to the lens for zoom, focus adjustment.

When adjusting zoom, "ZOOM" will be shown on the screen and it will be 5 seconds after releasing the switch. When adjusting focus, "FOCUS" will be shown on the screen and it will be off 5 seconds after releasing the switch. For motor protection purpose the motor will stop after pressing the switch for 10 seconds.

Page 6

DESCRIPTION

Connect the AC power supply cord (supt to the projector.

MOVING THE PROJECTOR

Replace the lens cover when moving the projector to prevent damage to the lens

TROUBLE SHOOTING GUIDE

lease perform these simple checks before	calling for service.
SYMPTOMS	PROCEDURES
No power	Plug the projector into an AC outlet. Press the MAINS ON/OFF button to ON. Press the PAUNE ON/OFF button to ON. Press the PAUNE ON/OFF button to ON. Press the PAUNE ON/OFF Dutton to ON. One minute has not passed since LCD projector turned OFF. NOTE: After pressing the POWER (LAMP) ON/OFF button to OFF the projector, the projector functions as follows. The POWER and READY indicator will turn off. The POWER and IN operate for 1 minute after the projector is turned off. [During this "cooling down" period, the projector can not be turned on by pressing the POWER (LAMP) ON/OFF button on the projector may be turned on by pressing the POWER (LAMP) ON/OFF button on the projector or on the remote control unit.
No sound from built-in speaker	Press the VOLUME (A) and (Y) to (A). Press the INT. SP ON/OFF button to ON. Check audio cable connection from audio input source.
Picture is reversed	Press the REVERSE PICTURE SCANNING button.
Picture blurred or colour faded	Check the projection distance (2.3m ^-1 3.4m). Adjust the FOCUS control.
	NOTE: Moving the projector from a cool temperature location to a warm temperature location may result moisture condensation on the lens. In such an event, leave the projector OFF and wait until condensation disappears.

Page 7

NSIDE CONTROLS

QĢ

FUNCTION SELECT BUTTON Used to select on-screen adjustment displays for colour, fint, bright ness, contrast, sharpness and sound. Press repeatedly to cycle.
LEVEL CONTROL BUTTONS Used to adjust volume, zoom, focus, colour, fint, brightness, contast, sharpness and keystone by pressing + or – button. A COMMFOCUS RUITON
- Used to select power zoom lens or focus system.
NORMALIZATION BUTTON Used to reset to normal factory set picture and sound adjustment
SUPERIMPOSE BUTTON Press this button to produce white characters and lines on a blue
REVERSE PICTURE SCANNING BUTTON Automatically reverses the projected screen image.
BLUE BACK BUTTON Used to project the blue image without video noise on the s when the video source is unplugged or turned off.

TOP INDICATION

Used to select the keystone correction mo
CAMP REPLACEMENT INDICATOR Lights orange when projection lamp is nearing end of s
Dependence of the second se
B READY INDICATOR Lights areen when projector is ready to be turned on.
POWER INDICATOR Lights dim when the projector is on. Lights bright when the projector is stand-by position.
- POWER (LAMP) ON/OFF BUTTON Press to turn projection lamp on or off.

BACK OF THE PROJECT

S-VIDEO INPUT JACK itsed to connect a S-VHS video source to
VIDEO INPUT-1 JACK
Used to connect a video source to the projector.
- AUDIO INPUT-1 JACKS Used to connect an audio input to the project
  - AUDIO MONITOR OUTPUT JACKS
    - Permits audio connection to a m
WIRED REMOTE JACK When using the wired remote control, connect the remote cable to this jack. INT SP ON/OFF RUTTON
Turns the built-in speaker on c
21-PIN TERMINAL Used to connect a video source with a 21-pin terminal to the projector. Mains ON/OFF BUTTON
- MAINS ON/OFF BUTTON Press to turn the projector on.

Page 8

REMOTE CONTROL BATTERY INSTALLATION

Press to select video source. (Video Input-1, Video Input-2 or RGB Input)
- POWER (LAMP) ON/OFF BUTTON Press to turn projection lamb ou or off
ZOOM BUTTONS Used to operate power zoom lens.

- 8

6 FOCUS BUTTONS Used to operate power focus svst
- Used to operate power focus sy SOUND MUTE BUTTON
  - Used to mute sound.
    - O VOLUME BUTTONS
Used to adjust volu EXPAND BUTTON
Press to expand the center portion of the image twice. This function is cancelled when the EXPAND button is pressed again or any other function button is pressed. G LEVEL CONTROL BUTTONS
- Used to adjust zoom, focus, colour, iint, brightness, contrast, sharpness and keystone by pressing + or button. KEYSTONE BUTTON
  - Used to select the keystone position.
COLOUR SYSTEM SELECT BUTTON Press to select colour system. (AUTO → PAL → SECAM → NTSC4.43 → NTSC)
EUNCTION SELECT BUTTON Used to select on-screen adjustment displays for colour, tint, brightness, contrast and sharpness. Press repeatedly to cycle. NORMALIZATION BUTTON
- USE NOTIMALIZATION BUTTON Used to reset to normal factory set picture and sou
C LIGHT UP BUTTON Press to light the Infumination for function buttons on the remote control unit for 5 seconds, and press any other function button during the institution of the remote control unit for 5 seconds, and press any other
- function button during the lighting to light for another 5 seconds. WIRED REMOTE JACK
  - When using the wired remote control, connect the remote cable to this jack.

The remote control unit can be used as wireless or wired remote control.

USING THE REMOTE CONTROL UNIT (wireless)

Point the remote control toward the front of the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about 5m and 150° from the front of the projector.

USING THE REMOTE CONTROL UNIT (wired)

Connect a remote control cable to RC jacks located on the remote control unit and the back of the projector.

To insure safe operation, please observe the following precautions: * Use (3) AA, UM3 or R06 type batteries. * Change three batteries at the same time. * Do not use anew battery with a used battery. * Avoid contact with water.

* Do not drop the remote control unit.

REMOTE CONTROL OPERATION

Page 9

SETTING-UP THE PROJECTOR

POSITIONING: This projector is basically designed to project on a flat projection surface. If the projector not placed at 90° angle to the screen, the projected image will have a keystone distortion. This projector can be focused from 2.3m - 13.4m. Use the ilustration below as an example when positioning the projector to the screen.

ROOM LIGHT

The projector should ideally be placed in a room with very limited light. Picture quality will be directly affected by lighting conditions.

LEVELING AND ELEVATING ADJUSTMENTS

Picture adjustments can be made with the two leveling/elevating feet. Adjustments of 5° up are possible by rotating the feet on the bottom of the projector. Adjustments of 5° down are possible by raising up the stand.

USING THE PROJECTOR TO TURN ON THE PROJECTOR

Connect the projector's AC power cord into a wall outlet and press the MAINS ON/OFF button (locate on projector


ess the POWER (LAMP) ON/OFF button on the projector to ON. The POWER	dicator will light dim and the cooling fan will operate. The wait display (A	OMENTI/UN MOMENTO! and numeral 30) appears on the screen and the count-	wn starts (30-29-281). The signal from the video source appears after 30	conds. Now the remote control unit can be activated, and all functions may be	ed.

• THIS PROJECTOR USE A METAL-HALIDE ARC LAMP. IF YOU TURN ON THE LAMP, DO NOT TURN IT OFF POR AT LEAST 5 MINUTES, SO AS NOT TO SHORTEN ITS LIFE. DO NOT UNPLUG THE PROJECTOR AND PRESS MAINS ON/OFF BUTTON (LOCATE ON PROJECTOR) TO OFF UNTIL THE COOLING FAN HAS STOPPED OPERATING.

After you turn off the projector use the POWER (LAMP) ON/OFF button on the projector or on the remote control unit you must wait one minute before you can turn the projector on again.

TEMPERATURE WARNING INDICATOR flashes red, the projector will automatically turn off. Wait at least 5 minutes before turning the projector on.

Press POWER (LAMP) ON/OFF button to OFF. Check the air filter for dust accumulation. Romove dust with vacuum cleaner. Press POWER (LAMP) ON/OFF button to ON.

If the TEMPERATURE WARNING INDICATOR still continues to flash, call your authorized distributor for

TO TURN OFF THE PROJECTOR (with the remote control unit)

Press the POWER (LAMP) ON/OFF button on the remote control unit to OFF. The POWER indicator will light bright and READY indicator will turn off. The cooling fan will operate for 1 minute after the projector is turned off. (During this 'cooling down' period, the projector can not be turned on.) After 1 minute, the READY indicator will ght green again and the projector may be turned on by pressing the POWER (LAMP) ON/OFF button on the remente control unit.

NOTE: Remote control unit can be activated only when POWER (LAMP) ON/OFF button on the projector is pressed to

TO TURN OFF THE PROJECTOR (without the remote control unit)

tor can not be turned on.) After 1 minute, the READY indicator will light green again and the projector may be turned on by pressing the POWER (LAMP) ON/OFF button on the projector.

NOTE: If the projector is turned off by the remote control unit, it can be turned back on without the remote by pressing the POWER (LAMP) ON/OFF button on the projector twice.

Page 10

ADJUST THE PROJECTOR

VIDEO MODE SELECT

Press the VIDEO MODE select button (located on projector or remote control unit) to select Video Input-1, Video Input-2 or "FGB" Input. The "AV1", "AV2" or "FGB" display will appear on the screen.

Press the COLOUR SYSTEM select button (located on projector or remote control unit) to select AUTO, PAL, SECAM, Each time Colour System select button is pressed, the colour system changes as follows: NTSC4.43 or NTSC.

When the colour system is set to "AUTO" position, this projector can receive colour programs from one of the 4 sys-tems (PAL, SECAM, NTSC4.43 or NTSC), automatically. If the picture quality is poor, make sure the proper colour system is selected to match the video source.

VOLUME ADJUSTMENT

Press INT, SP ON/OFF button to ON/IN) position when the INTERNAL

Press LEVEL buttons on the projector, or VOLUME buttons on the remote control until adjust the volume. The screen display will appear. Pressing (+) will increase volume and the green indicator will increase to the right on the screen.

Pressing (-) will decrease volume and the green indicator will decrease to the left on the screen. Press INT. SP ON/OFF button to OFF (OUT) position, will disengage the

SOUND MUTE ADJUSTMENT

Pressing SOUND MUTE button on the remote control unit will mute audio (Sound Mute display will appear). Press SOUND MUTE button again to

Press the REVERSE PICTURE SCANNING button on The versatile left/right picture reverse capability lets you project onto the screen from in front or behind.

Page 11

KEYSTONE CORRECTION

hen the projector is used at upper or lower position, keystone distortions appear at the bottom or top of the screen the keystone can be corrected as follows: DW MOLINT PROJECTION CORRECTION

LOW MOUNT PROJECTION if the projector is mounted low, the keystone will appear at the top of the screen. Press keystone button on the projector, or remote control unit using the tip of a ballpoint pen until the bar appears on the top of the screen. Press the level (-) button until the keystone is corrected.

HIGH MOUNT PROJECTION If the MOUNT PROJECTION If the projector is mounted high, the keystone will appear at the bottom of the screen. Press keystone button on the projector, or remote control unit using the tip of a ball-point pen unit the bar appears on the bottom of the screen. Press the level (-) button until the keystone is corrected.

NOTE: The projector is equipped with a built – in memory feature that eliminates the need to readjust the keystone each time the projector is turned off and the AC power cord is disconnected.

PICTURE AND SOUND ADJUSTMENTS

Picture and sound adjustments have been preset at the factory to our quality standards. However, with the FUNC-TION and LEVEL buttons on the projector or on the remote control unit you can make picture and sound adjustments you personally prefer.

Select the picture and sound adjustments function by pressing FUNCTION button. Each time FUNCTION button is pressed, the control function changer as follows:

NOTE: 1. "SOUND" will be appears, only when FUNCTION button above the projector is pressed. 2. "TINT" will be skipped during in the PAL and SECAM mode.

2. Adjust the colour intensity, tint, contrast, brightness, sharpness or sound by pressing LEVEL (+ and -) buttons.

	- revel
Press the LEVEL Refer to the cont	CONTROL buttons to make adjustments. Control below.
COLOUR	DECREASES
TINT	MORE PURPLE 🖈 MORE GREEN
CONTRAST	SOFTER
BRIGHTNESS	DARKER 🔺 — 🕨 BRIGHTER
SHARPNESS	SOFTER ▲ → ► SHARPER
SOUND	DECREASES

. The ON-SCREEN display will disappear automatically in 8 seconds.

NOTE: The projector is equipped with a built-in memory feature that can maintain the picture and sound level adjustment to set on AV1 and AV2/RGB respectively even if the projector is turned off and AC power cord is disconnected. If NORMALIZATION button is pressed, the projector will return to factory preset level.

Page 12

our projector is equipped with various audio/video inputs and outputs including S-VHS video input and 21-pin termi als.

CONNECTING TO THE AV1 INPUT JACKS

Connect to the video and audio outputs of a VCR, video disc player, video camera, satellite TV tuner or other AV equipment.

If the audio signal from the AV equipment is stereo, be sure to connect the right and left channels to the respective right and left audio input jacks.

If the external audio signal is monaural connect it to the left a

S-VHS FORMAT VCR CONNECTION

The AV1 input includes an extra video input jack marked S-VIDEO to allow connection to an S-VHS format VCR that has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack.

CONNECTING TO THE AV2 21-PIN TERMINAL

VCR, Video disc player or other AV equipment can be connected to the 21-pin terminal on the rear of the projector. When the 21- pin terminal is used for connection of AV equipment, note the following points.

When using the equipment with the output function signal into PIN No. 8 of 21-pin terminal below, the VIDEO MODE is automatically set to "AV2" and VIDEO MODE selection is not required. And when using equipment without the output function signal, press VIDEO MODE select button on the projector or remote control to select "AV2" mode.

When using the equipment with RGB output signal and without the control signals for PIN No. 8 and 16 of 21-pin terminal below, press VIDEO MODE select button to select "RGB" mode, and when using equipment with both RGB output signal and the control signals, the VIDEO MODE is automatically set to "AV2" mode and VIDEO MODE selection is not required.

CONNECTING TO THE AUDIO MONITOR OUTPUT JACK

These jacks will contain the auclio information of the selected program source being viewed on the screen. If you have elected program source AV1 the auclio signals connected to the AV1 jacks will be available at the auclio monitor outpout lacks.

If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respectiv right and left jacks.

If the audio input of the audio equipment is monaural, connect it to the left jack.

eciti	cation of 21-pin terminal		PIN NO.	Signal
Ño.	Signal		Ţ,	Green (G) input	0.7 Vp-p/75
Ŀ.	Audio output (right channel)	0.5 Vrms/ ≤ 1 K ohm	5	Not used
~i	Audio input (right channel)	0.5 Vrms/ ≥ 10 K ohm	13.	Earth (red)
, mi	Audio output (left channel)	0.5 Vrms/ ≤ 1 K ohm	14.	Earth
	Earth (audio)		15.	Red (R) input	0.7 Vp-p/75
	Earth (blue)		16.	Fast blanking	L: 0-0.4V, H
	Audio input (left channel)	0.5 Vrms/ ≥ 10 K ohm	17.	Earth (video)
~.'	Blue (B) input	0.7 Vp-p75 ohm	18.	Earth
	Function switching	L: 0-2V, H-12V	19.	Video sync. output	1 Vp-p/75 of
	Earth (green)		20.	Video sync. input	1 Vp-p/75 of
ä	Not used		21.	Earth
		21-PIN TE	ERMINAL

Page 13

The removable air filter prevents dust from accumulating on the surface of the projection lens and projection mirror. Should the air filter become clogged with dust particles, it will reduce the cooling fan's effectiveness and may result in internal heat built up and reduced the life of the projection lamp.

12 LAMP REPLACEMENT & TEMPERATURE WARNING INDICATORS

LAMP REPLACEMENT INDICATOR

When the tamp nears the end of its service life, the picture quality and colour quality will deteriorate and the tamp replacement indicator will light orange.

A DO NOT ATTEMPT TO REMOVE OR CHANGE THE PROJECTION LAMP. THE LAMP CAN ONLY BE CHANGED BY QUALIFIED SERVICE PERSONNEL.

TEMPERATURE WARNING INDICATOR

The TEMPERATURE WARNING INDICATOR lights red when the internal temperature of the projector exceeds the

Vaniliation slots at the rear or bottom of the projector are blocked. In such an event, reposition the projector so that ventilation slots are not obstructed.

2. Air filter is clogged with dust particles. Remove dust from the air filter by following instructions in the Air Filter Care and Cleaning section above. If temperature warning indicator remains on after performing the checks listed above, cooling fan/internal circuits may be malfunctioning. Request service from an authorized distributor or service station.

- 13 -

Page 14

TROUBLESHOOTING CHART

The below chart is troubleshooting guide on a circuit characteristic of this projector and describes the general standard for discovering trouble spots. Please refer to it when performing maintenance. Please use when inspecting inside the unit.

* The temperature responsive reed switch relay (SW904 and SW905) is ON under normal conditions.

Page 15

Page 16

Page 17

NO SOUND

Page 18

LAMP REPLACEMENT

WARNING

THIS LAMP IS OPERATED UNDER HIGH PRESSURE. FOR CONTINUED SAFETY, REPLACE WITH A LAMP OF THE SAME TYPE. UNPLUG THE PROJECTOR FROM THE POWER OUTLET BEFORE THE PROJECTION LAMP IS REPLACED. DO NOT ATTEMPT TO CHANGE A HOT LAMP. BE CAREFUL NOT TO TOUCH THE LAMP OR MIRROR WITH OILY FINGERS.

Remove 2 screws and lamp cover.

Remove 2 screws on the lamp ass'y.
2. Grip the handle and pull out the lamp ass'y carefully.

Beplace with new lamp ass'v.
2. Install the lamp cover.

4 1. Connect the AC power cord to an outlet, and turn power on.
2. Wait 1 minute after turning power on.
3 Press the BESET SWITCH for 2 seconds
Note: The "RESET" display will appear on the screen and the lamp replacement indicator disappears.

RECOMMENDATION

÷ 32

Should the air filter become clogged with dust particles. it will reduce the cooling fan's effectiveness and may result in internal heat build up and short lamp life. We recommend cleaning the air filter after the projection

Refer to AIR FILTER CARE AND CLEANING on the page 13.

HOW TO CHECK THE LAMP ILLUMINATION TIME

1. Checking procedure

With the projector in operating mode, press the LEVEL "+" or " - " button for 30 seconds; four red alphabets will appear on the screen for 5 seconds.

2 Calculation of illumination
- 8 × (B × 4096 + M × 256 + F × 16 + L) A. ILLUMINATION TIME = 1000 -(Setting time: 1000 hours) 8 × (B × 4096 + M × 256 + F × 16 + L) B ILLUMINATION TIME = 2000 -
- 60 (Setting time: 2000 hours See page 5.)

BMFL

Note: If the RESET button is pressed, the data of illumination time will be initialized.

3. Alphabet – number conversion table

A--- 0 B--- 1 C--- 2 D--- 3 E--- 4 F--- 5 G--- 6 H--- 7 I--- 8 J---9 K---10 L---11 M---12 N---13 O---14 P---15

4. Calculation example

1000 - 8×(1×4096 + 12×256 + 5×16 + 11)

Approx. 32 hour of illumination

Page 19

MECHANICAL DISASSEMBLIES

Page 20

Page 21

Page 22

Page 23

POWER BOARD REMOVAL

Remove 4 screws-A on the power board. Then remove the power board

POWER TRANS REMOVAL

Remove 2 screws-B on the power trans. Then remove the power trans.

SIDE FAN REMOVAL

Remove 4 screws-C on the side fan. Then remove the side fan.

LCD UNIT REMOVAL

1. Remove 4 screws on the bottom of the LCD unit.

2. Then pull the LCD unit upward and remove from bottom cabinet.

Page 24

Downloaded from www.Manualslib.com manuals search engine

Page 25

Page 26

LCD PANEL ASS'Y REPLACEMENT

FPC CONNECTOR

1. Changing the LCD Panel Ass'y, remove the 2 screws-A for the R-Panel, the 2 screws-B for the G-Panel, and the 2 screws-C for the B-Panel.
2. Unfasten the FPC from the wire holders and disconnect FPC from the FPC connector on main board.
3. Then remove the LCD panel from the panel retainer.
4. For installation of the new panel, reverse the above procedures.

After replacing an LCD panel, check the focus (refer to Focus Adjustments) and adjust the convergence (refer to Convergence Adjustment).

When replacing the R - LCD panel, check the R focus and adjust the convergence.

When replacing the B - LCD panel, check the B focus and adjust the convergence.

When replacing the G – LCD panel, after checking the G focus, also check the R and B convergence.

Adjust the R and B convergence if either one is out of alignment. (Alignment of G with R and B can also be made by adjusting the position of the G panel.)

Page 27

LCD PANEL REPLACEMENT

1. Remove the LCD panel assembly by following steps 1-3 of the LCD PANEL ASS'Y REPLACEMENT procedure on page 27 on this manual.
2. Disassemble the LCD panel assembly by removing the 4 screws. (See Fig. 1 and 2.)
3. Replace the LCD panel and reassemble the panel assembly. Then, adjust the polarizing glass following the procedure given below.

POLARIZING GLASS ADJUSTMENT

1. Connect the FPC cable to the LCD panel assembly.
2. Using a light source, such as a fluorescent lamp, illuminate the polarizing glass from the "A" direction (the side which is not adjusted). See Fig. 1 and 2.
3. With no signal applied to the projector, turn on the power.
4. Loosen the 3 mounting screws that hold the polarizing glass. (See Fig. 3.)

Rotate the polarizing glass until a minimum of light passes through the glass (the light is darkest), then tighten the 3 screws.

Page 28

OPTICAL ADJUSTMENTS

Optical path adjustment

Preparation before adjustment.
1. Place lamp, M1, M2, BM, GM1, GM2, RM and lens at right position.
2. Make sure that M2, BM, GM2, RM is placed at 45 degree with optical path and 90 degree with base.

• Optical path adjustment.

1. Turn the lamp on and place screen in front of projection lens and show the lamp image on the screen.
2. If the blue lamp image is off from the green lamp image at 90 degree angle (vertical) when masking the red lamp, rotate GM1, and if the lamp image is off at horizontal direction, adjust mounting angle against base.
3. If the blue lamp image is off from the red lamp vertically when masking the green lamp, rotate M1 and if that is horizontal, adjust mounting angle against base.

This adjustment is only for R.G.B. optical path, and not for centering the beam.

Page 29

FOCUS ADJUSTMENTS

When conducting focus adjustment, first adjust the G (green) LCD panel unit as the standard reference. Next align the focus for R (red) and B (blue) by adjusting the position of each panel unit.

For adjustment, the setting configuration for the unit is as shown in Fig.1, Fig.2 and Fig.3.

The pattern signal used for adjustment should be a pattern in which the R, G and B dots are easily distinguishable. (A flat pattern, etc.)

G-LCD Panel Unit Position Adjustment (G Focus Adjustment)

1. Turn on the power to the unit, and project the adjustment pattern on the screen.
2. Insert paper, etc. in locations B and C as indicated in Fig.1 to block the B light and R light, and project only the G light. Set the focus control to initial (mid) position and set zoom control to minimum position use control on RC transmitter or projector.
3. Loosen screws "1" (Fig.1) and screws "2" (Fig.2). Move the G panel unit up or down until the middle right side of the screen is in sharp focus. For adjustment, insert a slot head screwdriver in the adjustment slot "a"(Fig.1). In case of unable to adjust, permit to adjust focus by focus control on RC transmitter or projector.
4. In the same manner, use the slot "b"(Fig.2) and adjust the top left side of the screen is in sharp focus.
5. Then use the slot "c"(Fig.2) and adjust the bottom left side of the screen is in sharp focus.
6. Set zoom control to maximum position. Repeat steps 3-5 until the G focus is in the best position possible, then tighten screws "1" and "2".

R-LCD Panel Unit Position Adjustment (R Focus Adjustment).

Before conducting the R focus adjustment, make sure the G focus adjustment has already been completed.

1. Insert paper, etc. in locations A and B as indicated in Fig.1 to block the G light and B light, and project only the R light.
2. Loosen screws "3" (Fig.1) and screw "4" (Fig.3). Move the R panel unit forward or backward until the middle right side of the screen is in sharp focus. For adjustment, insert a slot head screwdriver in the adjustment slot "d"(Fig.1).
3. In the same manner, use the slot "e"(Fig.3) and adjust the top left side of the screen is in sharp focus.

4. Then use the slot "f"(Fig.3) and adjust the bottom left side of the screen is in sharp focus.
5. Repeat steps 3-5 until the R focus is in the best position possible, then tighten screws "3" and "4".

B-LCD Panel Unit Position Adjustment (B Focus Adjustment).

Before conducting the B focus adjustment, make sure the G focus adjustment has already been completed.

1. Insert paper, etc. in locations A and C as indicated in Fig.1 to block the G light and R light, and project only the B light.
2. Loosen screws "5" (Fig.1) and screw "6" (Fig.3). Move the B panel unit forward or backward until the middle right side of the screen is in sharp focus. For adjustment, insert a slot head screwdriver in the adjustment slot "g"(Fig.1).
3. In the same manner, use the slot "h"(Fig.3) and adjust the top left side of the screen is in sharp focus.
4. Then use the slot "i"(Fig.3) and adjust the bottom left side of the screen is in sharp focus.
5. Repeat steps 3-5 until the B focus is in the best position possible, then tighten screws "5" and "6".
* Sharp Focus ···· A single dot being clearly distinguishable on the screen.

Page 30

Figure 1

Downloaded from www.Manualslib.com manuals search engine

Page 31

CONVERGENCE ADJUSTMENTS

For convergence adjustment, with G (green) as the reference standard, align R and B by adjusting the position and angle of the R (red) and B (blue) LCD panels.

Before Adjustment:

Make sure each R, G, B LCD panel unit has been correctly installed, and that all focus adjustments have been completed before performing convergence adjustments.(See Focus Adjustments)

Below is an explanation regarding adjustment screws and panel movement.

4 Screws "1" shown in Fig.2, hold the LCD panels in place (hex hole screws).

Screws "A", "B" and "C" shown in Fig.2 are for convergence adjustment.

The movement of the R and B patterns using the "A", "B"and "C" screws is as follows:

R Panel Adjustment

1. Insert paper, etc. in location A shown in Fig.1 to block the B light.
2. Loosen 4 screws "1" on the R panel. (Refer to Fig.2)
3. Using screws "A" and "B" (Fig.2), align the R grid pattern vertical center line parallel with the G grid pattern vertical center line (at this time the horizontal line will also be parallel).

Adjust the "A", "B" screws with a slot type screwdriver.

4. Turn both "A" and "B" screws in the same direction to align the R vertical center line on top of the G vertical center line. Repeat procedures 3 and 4 if necessary.
5. Turn screw "C" by slot type screw driver to align the R horizontal center line on top of the G horizontal center line.
6. By repeating steps 3 thru 5, align the R grid pattern directly on top of the G grid pattern. Convergence adjustment is always made on the center of the grid pattern. There may be some color misalignment on

the periphery of the screen.

7. Tighten the R panel screws "1" when adjustment has been completed.

Screw B

Screws A and B

Screw C

B Panel Adjustment

1. Insert paper, etc. in location B shown in Fig.1 to block the R light.
2. Loosen 4 screws "1" on the B panel. (Refer to Fig.2)
3. The adjustment procedures for aligning the B grid pattern on top of the G grid pattern are the same as those for the R panel.

Page 32

Page 33

CLEANING METHODS

After long periods (many years) of use, dust and particles and other contamination will accumulate on the LCD panel Ass'y (LCD panel and polarizing plate), lens, mirror, etc. and the picture will tend to darken and color blurring may occur.

When this occurs, cleaning of the inside of the unit will be necessary. For dust and light accumulation of contamination, use an air spray to remove the dust. If the contamination cannot be removed by air spray, disassembly and cleaning of the unit will be necessary. Perform all cleaning according to the cleaning methods given below.

Air Spray cleaning Method

Remove dust from the LCD panel Ass'y by inserting the air spray nozzle in the openings on both sides of the sets holding the LCD panel Ass'y. (Caution: Always use a nozzle made of resin. Also be very careful not to cause any damage to the LCD panel assembly parts with the nozzle tip.

Caution:

Use a commercial (insert gas) air spray designed for camera cleaning use. Never use any cleaner other than that specified for cleaning the LCD panel Ass'y (LCD panel and polarizing plate), lens, mirror, etc. Also, never scrape with any hard material as this will cause damage.

Page 34

Disassembly cleaning Method

After performing disassembly cleaning, adjustment of the unit will be necessary.

Disassembly cleaning should only be performed when there is considerable contamination which cannot be removed by air spray.

Caution:

Never remove the mirror. The position of the mirror is precisely set at the factory. Perform all cleaning of the mirror with it attached to the unit.

Disassemble and clean the LCD panel units.

Disassembly and assembly of the LCD panel units is performed according to the exploded view diagrams given for each panel, cleaning of the mirror is always performed with it attached to the main unit.

Perform the cleaning of each part according to the cleaning methods described below.

• LCD Panels Ass'y (LCD panel and polarizing glass lens)

Remove dust, etc. by wiping with a soft cloth. For heavy contamination, remove by moistening the cloth with alcohol.

Caution:

Never use organic solvents (thinners, etc.) as their use will cause damage to these surfaces.

Never use water or other liquids on the LCD panels ass'y. If the liquid gets into the circuits, damage will result.

Mirrors

Remove dust, etc. by wiping with a soft cloth. For heavy contamination, remove by moistening the cloth with alcohol.

Caution:

Never use organic solvents (thinners, etc.) as their use will cause damage to these surfaces.

Page 35

SERVICE ADJUSTMENTS

+12 VOLT (ALWAYS) ADJUSTMENT

EQUIPMENTS ······	Digital voltmeter
CONNECTIONS ······	TP-12V
	TE-12V (ground)
INPUT SIGNAL ·····	Standard video signa

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: Adjust VR601 to read 12.0 ± 0.1V DC.

HORIZ. OSC. FREQUENCY ADJUSTMENT

EQUIPMENTS ······ Short clip

CONNECTIONS ······ TP-1F TP-1E (ground)

INPUT SIGNAL ······ PAL Circular video signal

ADJUSTMENT: Adjust VR1J1 to below.

PAL/NTSC COLOUR ADJUSTMENT

1. CW Adjustment EQUIPMENTS ······ Short clip

CONNECTIONS ······ TP-1D TP-1E (ground)

INPUT SIGNAL ······ PAL/NTSC3.58 Colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: Adjust VC131(PAL) and VC132(NTSC3.58) to below.

2. PAL Colour Adjustment EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-BY TP-1E (ground)

INPUT SIGNAL ······ PAL Colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T121 adjust the amplitude of "a" shown below to be minimum. By using VR121 adjust the amplitude of "b" shown below to be minimum.

Page 36

SECAM COLOUR ADJUSTMENT

1. Bell-Filter Adjustment EQUIPMENTS ····· Oscilloscope

CONNECTIONS · TP-1A TP-1E (ground)

INPUT SIGNAL ······ SECAM Colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T041 adjust the envelope of the below wave form to be most straight.

2. SECAM ID Adjustment EQUIPMENTS ······ Oscilloscope (Special Probe)

CONNECTIONS ······ TP-1C TP-1E (ground)

INPUT SIGNAL ········ SECAM Colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T131 adjust A to be maximum.

3. R-Y Adjustment EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-RY TP-1E (ground)

INPUT SIGNAL ······ SECAM colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T112 adjust "a" must be same as center line of "b".

4 B-Y Adjustment EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-BY

TP-1E (ground)

INPUT SIGNAL ······ SECAM colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T111 adjust "a" must be same as center line of "b".

A/D INPUT ADJUSTMENT

EQUIPMENTS · Oscilloscope

CONNECTIONS ······ TP-1X TP-1H (ground)

INPUT SIGNAL ······ PAL Colour video signal

PICTURE CONDITION ······ Normal position.

ADJUSTMENT: By using VR151 adjust A to be 3 ± 0.2Vp-p

Page 37

VCO OSC. ADJUSTMENT

1. VCO (18MHz) Adj. EQUIPMENTS · · Digital voltmeter

CONNECTIONS ······ TP-32 TE-6 (ground) INPUT SIGNAL ····· PAL Circuler video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T401, adjust TP-32~TE-6 to be 2.5 ± 0.1V.
2. VCO (15MHz) Adj. EQUIPMENTS ····· Digital voltmeter

CONNECTIONS ······ TP32A TE-6 (ground) INPUT SIGNAL ····· PAL Circuler video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using T402, adjust TP-32A~TE-6 to be 2.5 ± 0.1V.

VCO FREE OSC. ADJUSTMENT

EQUIPMENTS ······ Short clip X 2

CONNECTIONS ······ TP-31 to TE-1 (Ground) TP-21 to TE-10 (Ground)

INPUT SIGNAL ..... NTSC Circular video signal

ADJUSTMENT: Adjust T403 to below.

CLAMP LEVEL ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······· TP-37 TE-6 (Ground)

INPUT SIGNAL ····· PAL Colour video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: Adjust VR6341 to below.

B-Y ADJUSTMENT

EQUIPMENTS · Oscilloscope

CONNECTIONS ······ TP-1X TP-31E (ground)
INPUT SIGNAL ..... Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using VR161, adjust the wave form to be straight.

Page 38

Y BLANKING LEVEL ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-25 TE-1 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using V6302, adjust the blanking level for same as pedestal level.

Y INPUT LEVEL ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-25 TE-1 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using V6301, adjust A to be 0.6Vp-p. By using VR264, adjust B to be 1.7VDC.

SUB CONTRAST LEVEL ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-26 TE-1 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using V6601, adjust A to be 0.6Vp-p.

BIAS ADJUSTMENT

EQUIPMENTS · Oscilloscope

CONNECTIONS ······ TP-22G TE-4 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT:

1. By using VR221, to increase the size of the TP-22G waveform as far as possible without saturation.
2. By using VR262, adjust so that the rising and falling waveform portions are equal.

Page 39

GAMMA ADJUSTMENT

EQUIPMENTS ..... Digital voltmeter

CONNECTIONS ······ TP-30 TE-1 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using V261, adjust to 2.7 ± 0.05VDC.

SUB BRIGHT ADJUSTMENT

EQUIPMENTS ..... Digital voltmeter

CONNECTIONS ····· TP-29 TE-1 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using V6202, adjust to 2.7 $\pm$ 0.05VDC.

CONTRAST 2 ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-22G TE-4 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using VR263, adjust A to be 5 ± 0.1Vp-p.

G DC ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-22G TE-4 (ground)

INPUT SIGNAL ······ 16 Step Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: Adjust VR221 to below

R.G.B. GATE VOLTAGE ADJUSTMENT

EQUIPMENTS ..... Digital voltmeter

CONNECTIONS ······ TP-35R (R +) TP-22R (R -) TP-35G (G +) TP-22G (G -) TP-35B (B +) TP-22B (B -)

INPUT SIGNAL ..... Gray Scale video signal

PICTURE CONDITION ····· Normal position.

ADJUSTMENT: By using VR502(R), VR522(G), VR542(B), adjust to -14.8~-15.2V.

BLUE SUPER ADJUSTMENT

INPUT SIGNAL ...... 16 Step Gray Scale video signal

ADJUSTMENT:

1. Superimpose switch to OFF position and remember the 8 step position on the screen.
2. Turn the Superimpose switch to ON position.
3. By using VR6570, adjust the screen so that areas below the 8 step position become white.

Page 40

R VIDEO ADJUSTMENT

EQUIPMENTS ······ Oscilloscope × 2
CONNECTIONS ......Scope 1: TP-22R and ground Scope 2: TP-22G and ground
INPUT SIGNAL .................................... signal
PICTURE CONDITION ····· Normal position.
ADJUSTMENT: 1. Turn VR201 to mechanical center. 2. By using VR202, adjust TP-22R waveform voltage (p-p) for same as TP-22G

B VIDEO ADJUSTMENT

EQUIPMENTS ······ Oscilloscope × 2
CONNECTIONS ...... Scope 1: TP-22B and ground Scope 2: TP-22G and ground
INPUT SIGNAL ..... 16 Step Gray Scale video signal
PICTURE CONDITION ····· Normal position.
ADJUSTMENT: 1, Turn VB241 to mechanical center. 2. By using VR242, adjust TP-22B waveform voltage (p-p) for same as TP-22G.

TP-22B TP-22G and TP-22B WAVEFORM

WHITE BALANCE ADJUSTMENT

INPUT SIGNAL ..... Gray Scale video signal

PICTURE CONDITION ···· Normal position.

ADJUSTMENT: By using VR201 (R-DC Level Adj.) and VR241 (B-DC Level Adj.), adjust to be balanced Gray Scale.

COMMON AMP. ADJUSTMENT

EQUIPMENTS ······ Oscilloscope

CONNECTIONS ······ TP-52R Chassis Ground

INPUT SIGNAL ..... Gray Scale video signal

PICTURE CONDITION ····· Normal position.
ADJUSTMENT: By using VR266, adjust A to be 8.0 ± 0.2 Vp-p.

R.G.B. COMMON CENTER ADJUSTMENT INPUT SIGNAL ···· Grav Scale video signal
- PICTURE CONDITION ···· Normal position.
- ADJUSTMENT: 1. Display one colour picture (R, G or B) by using two shutters
  - 2. By using VR511 (R), VR531 (G) or VR551 (B) adjust the picture to be darkest.

O.S.D. CENTER ADJUSTMENT

INPUT SIGNAL ···· NTSC Circular video signal

PICTURE CONDITION ···· Normal position.

ADJUSTMENT: By using VR803, adjust the center of OSD to picture center.

REMOTE CONTROL TRANSMITTER SERVICE NOTE

To repair remote control transmitter, check as follows:

1. Check battery installation and battery voltage. If necessary, replace batteries.
2. Connect oscilloscope to Q1 "Base" and ground
3. Check the amplitude pulse by pushing the remote control transmitter key in the due order.
4. If pulse does not appear, replace with a new unit.

Page 41

CHASSIS ELECTRICAL PARTS LIST

Product safety should be considered when a component replacement is made in any area of a receiver. Components indicated by a A mark in this parts list and the circuit diagram show components whose value have special significance to product safety. It is particularly recommended that only parts specified on the following parts list be used for components replacement pointed out by the mark.

Note: Part order must contain Service Ref. No., Part No., and descriptions.

Read description in the Capacitor and Resister as follows: CAPACITOR	Ref. No. Part No. Description
CERAMIC 100P K 50V Tolerance Symbols: Less than 10PF A: Not specified B: ± 0.1PF C: ± 0.25PF D: ± 0.5PF F: ± 1PF G: ± 2PF	IF THERE IS A PROBLEM IN THE LAMP BALLAST UNIT, ONLY USE THESE REPLACEMENT PARTS FOR BEST PERFORMANCE AND SAFETY.
R: +0.25-0PF S: +0-0.25PF E: +0-1PF More than 10PF A: Not specified B: ± 0.1% C: ± 0.25% D: ± 0.5% F: ± 1% G: ± 2% H: ± 3% J: ± 5% K: ± 10% L: ± 15% M: ± 20% N: ± 30% P: +100-0% C: +30-10% T: +50-10% U: +75-10% V: +20-10% W: +100-10% X: +40-20% Y: +150-10% Z: +80-20% Rated value:P=pico farad,U=Micro farad Material : CERAMICCeramic MT-PAPERMetallized Paper POLYESTERPolyester MT - POLYESTMetallized Polyester POLYPROPolypropylene COMPO FILMComposite film MT - COMPOMetallized Polypropylene COMPO FILMCOMPOSITE	▲A701 610 245 1900 LAMP BALLAST UNIT ▲D701 407 124 9801 DIODE RBV-608 ▲D704 407 146 8202 DIODE FMG-636S ▲D732 407 048 7600 ZENER DIODE E0A02-13A ▲R701 402 066 3603 WIRE WOUND 10 JA 5W ▲R713 402 066 2002 WIRE WOUND 10 JA 5W ▲R713 402 066 2002 WIRE WOUND 33 JA 3W ▲R701 610 239 5204 RELAY A0701 405 105 6702 TR 25K1181 ▲0702 405 119 1809 TR 25K2080 A0704 405 119 1809 TR 25K2080 ▲0704 405 119 1809 TR 25K2080 A0731 405 033 2304 TR 25K2080 ▲0731 405 093 2304 TR 25K2080 A0731 405 093 2403 TR<
STYRENEStyrene TA-SOLIDTantalum Solid AL-SOLIDAluminium Solid FLECT	▲0733 405 004 4809 TR 2SA608-F-CTV-NP 405 028 7909 TR 2SA608-G-CTV-NP
NP-ELECTNon-polarized Electrolytic OS-SOLIDAluminium Solid with Organic Semiconductive Electrolytic	610 239 0995 POWER ASS'Y E5SA-A UE2563X1
DL-ELECTDouble Layered Electrolytic RESISTER CARBON 4.7K J A 1/4W Rated Wattage Performance Symbols: A:General B:Non flammable Z:Low noise Other -Temperature coefficient	CAPACITOR ▲C601 404 054 6603 MT-P0LYEST 0.470 M 250V ▲C602 404 054 6603 MT-P0LYEST 0.470 M 250V ▲C603 404 054 6603 MT-P0LYEST 0.470 M 250V ▲C603 404 008 2705 CERAMIC 470P K 400V ▲04 008 3108 CERAMIC 470P K 400V ▲C604 404 008 2705 CERAMIC 470P K 400V ▲C604 404 008 2705 CERAMIC 470P K 400V ▲C604 404 008 3108 CERAMIC 470P M 400V
Tolerance Symbols: A: ± 0.05% B: ± 0.1% C: ± 0.25% D: ± 0.5% F: ± 1% G: ± 2% J: ± 5% K: ± 10% M: ± 20% P:+5-15%	RESISTER ⊿R602 402 000 8305 SOLID 5.6M KA 1/2W ⊿R603 402 000 8305 SOLID 5.6M KA 1/2W
Rated value, ohms: K:1,000, M:1,000,000 Material : CARBONCarbon	COIL ☆L601 610 031 6317 LINE FILTER ☆L602 610 229 8932 LINE FILTER
MT - FILM	MISCELLANEUS ▲VA601 407 130 2902 VARISTOR ENC471D-14A ▲F601 423 022 2102 FUSE 250V 4A ▲SW601 610 218 9162 PUSH SWITCH
	610 239 1008 POWER ASS'Y E5SA-B UE2563X2
	TRANSISTER 406 000 6804 TR 2SA1015-GR (SAN) 405 001 7407 TR 2SA1015-O (SAN) 405 001 7605 TR 2SA1015-Y (SAN) 405 004 3109 TR 2SA564A-O (CU) 405 004 3208 TR 2SA564A-R (CU) 405 004 405 TR 2SA564A-R (CU) 405 004 405 TR 2SA564A-R (CU) 405 004 409 TR 2SA608-E-CTV-NP 405 006 1103 TR 2SA933-O 405 006 1202 TR 2SA933-R

Page 42

Ref. No. Part No.	Description	Ref. No.	Part No.	Description
Q602 405 016 970 Q603 405 118 690 405 118 700 Q604 405 059 990 405 012 230 405 012 230	) TR 2SC3070-CTV 4 TR 2SC3752L-RA7 ) TR 2SC3752M-RA7 3 TR 2SC1913-R-RA 9 TR 2SC1815-Y 3 TR 2SC538-E-NP	R629 R630 R631 R632 R633	401 024 7400 401 025 7805 401 024 7004 401 026 0607 401 059 9608	CARBON 10K JA 1/6W CARBON 2.2K JA 1/6W CARBON 1K JA 1/6W CARBON 270 JA 1/6W OXIDE-MT 2.2 JA 1W
405 019 210 405 019 380 405 020 750 405 020 770	TR 2SC536-G-NP TR 2SC945A-PA TR 2SC945A-DA	VARIABLE RES VR601	SISTER 610 234 7258	VR B-1K
0606 405 064 730 405 064 740 405 064 740 0607 405 011 730	7 TR 2SB1274–0-RA 5 TR 2SB1274–R-RA 5 TR 2SC1740–0	TRANSFORMER T601	610 229 4040	CONVERTER TRANS
405 011 740 405 011 750 405 012 200 405 012 230	TR 2SC1740-R TR 2SC1740-S TR 2SC1815-GR TR 2SC1815-Y	COIL AL603	610 031 5969 610 031 5976 610 031 1336
405 019 270 405 019 380 405 020 750	TR 2SC536-F-NP TR 2SC536-G-NP TR 2SC945A-PA	L612	610 031 1381	INDUCTOR 1500UHJ
405 020 770	TR 2SC945A-QA	D10DE D605 D606	407 003 5504 407 013 1008	DIODE DBA10C DIODE 1S1553
10601 → 409 170 530 10602 → 409 180 230	IC SI-3050C IC UPC1093J	D607	407 013 4306 407 013 6508 407 007 6606	DIODE 1S2076A DIODE 1S2471 DIODE ES1
C606 403 076 710 C607 403 076 710	CERAMIC 1000P M 1K CERAMIC 1000P M 1K	D608	407 013 1008 407 013 4306 407 013 6508	DIODE 1$1553 DIODE 1$2076A DIODE 1$2471
C608 403 076 710 C609 403 076 710 C612 ✓ 404 050 960 C613 403 165 700	CERAMIC 1000P M IK CERAMIC 1000P M IK ELECT 82U M 400V	D610 (	407 005 4505 407 013 1206 407 013 4207 407 013 7100	DIODE DS442X DIODE 1S1555 DIODE 1S2076 DIODE 1S2076
C614 403 058 910 C614 403 058 970 C616 403 056 950	POLYESTER 0.018U J 50V POLYESTER 0.018U J 50V POLYESTER 0.018U J 50V	D611 D613	407 013 7109 407 048 6108 407 103 1604 407 007 7206	ZENER DIODE E0A02-11A DIODE RU4YX LF-J3
403 057 0203 ▲C617 404 008 320 404 047 8300	POLYESTER 0.010 J 50V CERAMIC 1500P M 400V CERAMIC 1500P M 400V	D616	407 007 7300 407 118 2306 407 154 2704 407 112 6607	DIODE FML-12S LF-F DIODE YG901C2-LB DIODE 5DI 2C741A-LB
C621 403 052 8503 C622 403 042 2403 C623 403 218 3100	ELECT 1000U M 35V ELECT 100U M 16V ELECT 1000U M 16V	D617 D619 D620	407 103 1604 407 005 8602 407 005 8602	DIODE RU4YX LF-J3 DIODE ERA15-02 DIODE ERA15-02
C624 403 134 560 C626 403 135 8703 C627 403 053 690 C628 402 046 8004	ELECT 4700U M 16V ELECT 2200U M 35V ELECT 330U M 35V	D621	407 005 4505 407 013 1206 407 013 4207	DIODE DS442X DIODE 1S1555 DIODE 1S2076
C6226 405 046 800 C629 403 043 2008 C631 403 067 5603 C632 403 135 0004	ELECT 2200U M 25V ELECT 2200U M 16V MT-COMPO 0.1U J 50V ELECT 2200U M 25V	D622	407 013 7109 407 005 4505 407 013 1206 407 013 4207	DIODE 152473 DIODE DS442X DIODE 151555 DIODE 152076
C634 403 067 5603 C636 403 039 9004 C637 403 134 5604	MT-COMPO 0.1U J 50V ELECT 1000U M 10V ELECT 4700U M 16V	D636	407 013 7109 407 006 6300 407 064 6908	DIODE 152473 DIODE ERC05-10B DIODE TVR4N(X)
RESISTER R604 401 080 2005	WIRE WOUND 3.3 KB 2W	D637 D638	407006630040706469084070066300	DIODE ERCOS-10B DIODE TVR4N(X) DIODE ERCOS-10B
R607 401 007 5805 R608 401 007 5805 R609 401 065 2808	CARBON 120K JA 1/2W CARBON 120K JA 1/2W OXIDE-MT 120 JA 2W	D639	407064690840700663004070646908	DIODE TVR4N(X) DIODE ERCO5-10B DIODE TVR4N(X)
R610 401 059 2807 R611 401 024 7400 R612 401 025 8208	OXIDE-MT 150 JA 1W CARBON 10K JA 1/6W CARBON 22K JA 1/6W	D640 MISCELLANEUS	407 005 8602	DIODE ERA15-02
R613 401 026 0607 R614 401 025 7706 R615 401 099 1402	CARBON 270 JA 1/6W CARBON 2.2K GA 1/6W CARBON 330 GA 1/6W	△RL601 A1900C A1900D	610 009 5540 610 239 7253 610 239 7260	RELAY RC AMP ASSY E5SA-C RC AMP ASSY E5SA-D
KOLD 401 024 7400 R617 401 024 7004 R621 401 010 7704 R621 401 000 1000	CARBON 10K JA 1/6W CARBON 1K JA 1/6W CARBON 560 JB 1/2W CARBON 570 JB 1/2W	A1901 A1902	610048460361004846034080168803	RC PREAMP 411-1E RC PREAMP 411-1E PC PC113 (VDE0884)
R625 401 026 1000 R626 401 026 9907 R627 401 026 9907 R628 401 024 7400	CARBUN 2. (K JA 1/6W CARBON 4. 7K JA 1/6W CARBON 4. 7K JA 1/6W CARBON 10K JA 1/6W

— 42 —

Page 43

	Ref. No.	Part No.	Description			Ref. No.	Part No.	Description
5	610 239	1015 SIG	NAL&CNTL PCB	ASSY	E5SA			10 147222
						10041	409 132 7909	IC MC14053BCP
	QOP1	405 015 8704	TR 2SC2812-L6-TA			10050	409 051 3008	IC 1040538P IC UPD40538C
	0041 0042	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			10052	409 221 1306 409 260 4009	IC HCF0222
	0061 ₩ 0062	405 018 1900	TR 2SC3395-TA TR 2SC3395-TA			I C061 I C1A1	409 146 7209 409 195 4501	IC LA7222 IC TDA2579A/N8
	0063	405 015 8704	TR 2SC2812-L6-TA				410 036 7209	IC TDA2579/N6
	Q1A1	405 015 8704	TR 2502012 LO TA			I C1K1	409 203 2901
	QIFI Q1F2	405 015 8704 405 018 1900	TR 2SC2812-L6-TA TR 2SC3395-TA				409 141 0502 410 039 7008	IC TDA4555/V8
	Q1F3 Q1F4	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			10102	409 185 8908 409 277 0605	IC TDA4580/N4 IC TDA4580/V6
	Q1F5 Q1H1	405 002 6706 405 015 8704	TR 2SA1179-M6-TA TR 2SC2812-L6-TA			10801	409 277 0704 410 150 5907	IC TDA4580/V7 IC M37102M8-823SP
	01H2 01H3	405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			1 C802 1 C803	409 032 3803 409 199 5306	IC MN1280-S IC M6M80011AP
	Q1H4 01H5	405 015 8704	TR 2SC2812-L6-TA			10851	409 114 4803	IC LB1641
	Q1H6	405 015 8704	TR 2502012 L0 TA			CADACITOD	.0001 -1000
	Q1H7	405 015 8704 405 015 8704	TR 2502812-L6-TA				403 134 5802	ELECT 470U M 16V
	01H9 01J1	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			C0P1	403 069 9609 403 134 9602	ELECT 47U M 16V
	01J2 01J3	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			C002 C025	403 069 9609 403 069 9609	CERAMIC 0.01UZ 50V CERAMIC 0.01UZ 50V
	01J4 01J5	405 002 6706 405 015 8704	TR 2SA1179-M6-TA TR 2SC2812-L6-TA			C031 C032	403 026 3602 403 022 9004	CERAMIC 47PJ 50V CERAMIC 33PJ 50V
	01J6 0131	405 015 8704	TR 2SC2812-L6-TA			C036 C040	403 009 6200	CERAMIC 100P J 50V CERAMIC 0.0111 7 50V
	0132	405 018 1900	TR 2503335 TA TR 2503395-TA			C041	403 033 5309	CERAMIC 82P J 50V
	0152	405 002 0700	TR 25C2812-L6-TA			C042 C043	403 134 9602	ELECT 47U M 16V
	0153	405 015 8704 405 015 8704	TR 2502812-L6-TA			C045	403 166 1506	NP-ELECT 47U M 16V
	0172	405 015 8704 405 015 8704	TR 25C2812-L6-TA			C046 C047	403 125 5606 403 069 9609	CERAMIC 0.01U Z 50V
	0174 0175	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			C048 C049	403 009 6309 403 217 1509	CERAMIC TOOP J SOV CERAMIC 270P J SOV
	0176 0177	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			C051 C052	403 134 9602 403 134 9602	ELECT 470 M 16V ELECT 470 M 16V
	0179 0181	405 002 6706	TR 2SA1179-M6-TA TR 2SA1179-M6-TA			C053 C054	403 028 5000 403 071 6603	CERAMIC 56P J 50V CERAMIC 220P K 50V
	0182	405 015 8704	TR 2SC2812-L6-TA			C055 C056	403 069 9609 403 069 9609	CERAMIC O. 01U Z 50V CERAMIC O. 01U Z 50V
	0184	405 018 2402	TR 2SC3398-TA			C057 C058	403 026 3602	CERAMIC 47PJ 50V CERAMIC 150PJ 50V
	0802	405 018 2402	TR 2503398-TA			C059	403 069 9609	CERAMIC 0.01U Z 50V
		405 018 2402	TR 2503398-TA			C063	403 166 1506	NP-ELECT 47U M 16V
	0805	405 018 2402	TR 2503398-TA			C065	403 154 5002	CERAMIC 0.01U Z 50V
	0807 0821	405 018 2402 405 023 4903	TR 2503398-1A TR 25D400-D-MP			C067	403 134 9602 403 125 5606	ELECT 100U M 16V
		405 023 5009 405 023 5306	TR 2SD400-E-MP TR 2SD400-F-MP			C068 C069	403 069 9609 403 125 5606	CERAMIC U. UTU Z 50V ELECT 100U M 16V
	0829 0831	405 018 2402 405 018 1900	TR 2SC3398-TA TR 2SC3395-TA			C1A1	403 059 5901 403 059 6700	POLYESTER O. 022U K 50V POLYESTER O. 022U K 50V
	0842	405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA			C1A2 C1A3	403 067 6501 403 140 9207	MT-COMPO 0.18U J 50V NP-ELECT 10U M 16V
	0844	405 015 8704	TR 2SC2812-L6-TA			C1A4	403 011 5604	CERAMIC 120P J 50V FLECT 2,211 M 50V
	0848	405 018 2402	TR 2503398-TA			C1A6	403 121 2401	ELECT 22U M 16V
	0871	405 018 1900	TR 2503395-TA TR 2502812-L6-TA			C1A9	403 067 6204	MT-COMPO 0.15U J 50V
	0872	405 015 8704	IR 2SC2812-L6-TA				403 067 6204	MITCUMPU U. 150 J 50V CERAMIC O 0111 7 50V

Page 44

Ref. No.	Part No.	Description		Ref. No.	Part No.	De	scription
C1J3	403 121 2401	ELECT 22U M	16V	C187	403 069 9609	CERAMIC	0.01UZ 5	50V
C1J4	403 081 2800	POLYPRO 2200P J	100V	C188	403 134 9602	ELECT	47UM 1	6V
C1J5	403 067 5603	MT-COMPO 0.1U J	50V	C189	403 166 1506	NP-ELECT	47U M 1	6V
	403 125 5606		16V FOV	C190	403 085 6903	NP-ELECT	470 M 1	6V
	403 014 3203		50V 50V	C191	403 069 9609	CERAMIC		10V SOV
	403 056 7700	POLYESTER 1000P J	50V	C192	403 030 7807	CERAMIC		SOV
C1K2	403 059 2801	POLYESTER 2200P J	50V	C194	403 009 3407	CERAMIC	100P J 5	50V
	403 059 3402	POLYESTER 2200P J	50V	C195	403 074 5702	CERAMIC	560P K 5	νo
C1K3	403 134 9602	ELECT 47U M	16V	C196	403 074 5702	CERAMIC	560PK 5	IOV
	403 125 5606	ELECT 100U M	16V	C197	403 074 5702	CERAMIC	560P K 5	,0V
	403 014 9509	CERAMIC 180P J	500		403 069 9609	CERAMIC	0.010 Z 5	JOV
C113	403 030 7801	CERAMIC DOP J	50V 50V	6828	403 009 9009	UERAMIU FLECT
C114	403 018 1203	CERAMIC 22P J	50V	C829	403 014 0705	CERAMIC	18P J 5	50V
C116	403 244 3507	CERAMIC 180P J	50V	C831	403 014 0705	CERAMIC	18P J 5	JOV
C117	403 018 1203	CERAMIC 22P J	50V	C832	403 067 5603	MT-COMPO	0.1UJ 5	νo
C118	403 030 7801	CERAMIC 68P J	50V	0834	403 069 9609	CERAMIC	0.01U Z 5	,0V
	403 244 3507		500		403 067 6709	MI-CUMPU	0.220 J 5	OV OV
0120	403 244 3507	CERAMIC 0.010 Z	50V 50V	0838	403 067 5003		0.10 J 5	ΩV SOV
C122	403 069 9609	CERAMIC 0.01U Z	50V	C839	403 067 5603	MT-COMPO	0.10 J 5	50V
C123	403 067 5603	MT-COMPO 0.1U J	50V	C841	403 130 2805	ELECT	220U M 1	ÖV
C124	403 072 3502	CERAMIC 0.022U Z	50V	C851	403 069 9609	CERAMIC	0.01UZ 5	VOV
C125	403 134 5802	ELECT 470U M	16V	0052	403 069 9609	CERAMIC	0.01U Z 5	,0V
0120	403 134 6007				403 134 5802	ELECI	4/0U M I	6V
C128	403 067 7300		50V	0856	403 009 9009	CERAMIC		0V 0V
C129	403 069 9609	CERAMIC 0.01U Z	50V	C857	403 121 2609	ELECT	220U M 1	6V
C131	403 067 7706	MT-COMPO 0.047U J	50V	C858	403 134 5802	ELECT	470U M 1	6V
C132	403 067 7300	MT-COMPO 0.33U J	50V	C859	403 125 5606	ELECT	100U M 1	6V
C133	403 072 3502	CERAMIC 0.022U Z	50V	C872	403 072 8606	CERAMIC	330P K 5	.0V
6134	403 000 8205		50V 50V		403 072 8606	CERAMIC	330P K 5
0135	403 069 9609	CERAMIC 0.01117	50V	C882	403 121 2009		2200 M 1
C136	403 069 9609	CERAMIC 0.01U Z	50V	C883	403 121 2609	ELECT	220U M 1	6V
C137	403 244 3507	CERAMIC 180P J	50V
C138	403 030 7603	CERAMIC 68P J	50V	RESISTER	101 000 0501			/o
0139	403 069 9609		507		401 036 8501	MI-GLAZE	4/K JA 1/	8₩ /ow
C141	403 069 9609		50V		401 036 6501		- 4/K JA 1/ - 2 21/ 14 1/	on /SW
C143	403 069 9609	CERAMIC 0.01U Z	50V	R002	401 022 6801	CARBON	75 JA 1/	′4₩
C144	403 067 6709	MT-COMPO 0.22U J	50V	R003	401 022 6801	CARBON	75 JA 1/	′4₩
C145	403 121 3408	ELECT 2.2U M	50V	R004	401 036 8808	MT-GLAZE	470K JA 1/	′8W
C146	403 121 3408	ELECT 2.2U M	50V	R005	401 036 8808	MT-GLAZE	470K JA 1/	'8W
	403 072 3502		507	RUUD	401 035 5204			8W /ow/
C149	403 121 3408	FLECT 2 211 M	50V	R008	401 035 4108	MT-GLAZE	33K 1A 1/	/8W
C151	403 069 9609	CERAMIC 0.01U Z	50V	R009	401 036 5104	MT-GLAZE	33K JA 1/	′8₩
C152	403 069 9609	CERAMIC 0.01U Z	50V	R011	401 035 6805	MT-GLAZE	1.2K JA 1/	′8₩
C153	403 069 9609	CERAMIC 0.01U Z	50V	R012	401 035 4603	MT-GLAZE	100 JA 1/	8W
0155	403 014 9609	CERAMIC ISUP J	50V	RUI3	401 035 4701	MI-GLAZE	330 JA 1/	8₩ /ow
C150	403 109 0308		50V 50V	R014 R022	401 035 0805		1. ZK JA 1/	811 / AW
C158	403 067 6709	MT-COMPO 0.220 J	50V	R023	401 035 4900	MT-GLAZE	16 JA 1/	'8W
C159	403 067 6709	MT-COMPO 0.22U J	50V	R024	401 035 4900	MT-GLAZE	1K JA 1/	′8₩
C161	403 072 3502	CERAMIC 0.022U Z	50V	R025	401 035 7901	MT-GLAZE	1.5K JA 1/	′8₩
C162	403 072 3502	CERAMIC 0.022U Z	50V	R026	401 035 7901	MT-GLAZE	1.5K JA 1/	'8W
C166	403 012 3502		5UV 16V		401 035 4603	MI-GLAZE		ŏ₩ ∕gw
C167	403 069 9609	CERAMIC 0.0111.7	50V	ROA1	401 033 4003	MI-OLALE	820 IA 1/	/8W
C172	403 125 5606	ELECT 100U M	16V	R042	401 037 3703	MT-GLAZE	820 JA 1/	′8₩
C173	403 069 9609	CERAMIC 0.01U Z	50V	R043	401 036 8105	MT-GLAZE	470 JA 1/	′8₩
C180	403 134 9602	ELECT 47U M	16V	R044	401 035 4603	MT-GLAZE	100 JA 1/	'8W
	403 069 9609	UERAMIC 0.010 Z	50V	\| K045	401 035 4900	MI-GLAZE	1K JA 1/	8W /ow
	403 134 9002		10V 16V			MI-ULAZE	4/JA 1/	ŏ₩ ∕gw
C184	403 069 9609	CERAMIC 0.0111.7	50V	R048	401 035 4900	MT-GLAZE	1 7K IA 1/	/8W
C185	403 125 5606	ELECT 100U M	16V	R049	401 037 2102	MT-GLAZE	6.8K JA 1/	/8W
C186	403 125 5606	ELECT 1000 M	16V	R051	401 035 5204	MT-GLAZE	10K JA 1/	'8W

— 44 —

Page 45

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
R052 44 R053 44	01 035 7901 01 036 1601	MT-GLAZE 1.5K JA 1/8W MT-GLAZE 2.2K JA 1/8W	R1N7 R1N8	401 035 4900 401 036 1700	MT-GLAZE 1K JA 1/8W MT-GLAZE 22K JA 1/8W
R054 4	01 037 2102	MT-GLAZE 6.8K JA 1/8W	R1N9	401 036 8303	MT-GLAZE 4.7K JA 1/8W
R055 4	01 036 8105	MT-GLAZE 470 JA 178W MT-GLAZE 330 JA 178W	R1P2	401 036 8303	MT-GLAZE 4.7K JA 1/8W MT-GLAZE 820 LA 1/8W
R057 4	01 036 1601	MT-GLAZE 2.2K JA 1/8W	R1P3	401 035 4900	MT-GLAZE 1K JA 1/8W
R058 4	01 036 4701	MT-GLAZE 330 JA 1/8W	R1P5	401 036 1700	MT-GLAZE 22K JA 1/8W
R059 4	01 036 5104	MI-GLAZE 33K JA I/8W		401 036 8303	MI-GLAZE 4./KJA 1/8W
R062 4	01 035 7901	MT-GLAZE 1.5K JA 1/8W	R1P8	401 037 3703	MT-GLAZE 820 JA 1/8W
R064 4	01 035 7901	MT-GLAZE 1.5K JA 1/8W	R1P9	401 035 4900	MT-GLAZE 1K JA 1/8W
R065 4	01 035 5204	MT-GLAZE 10K JA 1/8W	R101	401 036 9904	MT-GLAZE 560 JA 1/8W
R067 4	01 035 5204	MI-GLAZE TOK JA 1/000 MI-GLAZE 47K LA 1/8W	R102	401 035 5204	MT-GLAZE TON JA TZ8W MT-GLAZE 2 7K LA 1/8W
R068 4	01 036 8501	MT-GLAZE 47K JA 1/8W	R105	401 036 1700	MT-GLAZE 22K JA 1/8W
R069 4	01 036 1601	MT-GLAZE 2.2K JA 1/8W	R106	401 036 1601	MT-GLAZE 2.2K JA 1/8W
RIAU 4	01 037 0108	MI-GLAZE 5. 5K JA 1/8W		401 035 4900	MI-GLAZE IKJA I/8W MT-GLAZE IKIA 1/8W
R1A2 4	01 035 5402	MT-GLAZE 10K JA 1/8W	R1R4	401 035 4300	MT-GLAZE 1.5K JA 1/8W
R1A3 4	01 036 8808	MT-GLAZE 470K JA 1/8W	R1S1	401 009 4806	CARBON 33 JA 1/2W
RIA4 4	01 035 4900	MT-GLAZE 1K JA 1/8W	R101	401 035 4900	MT-GLAZE 1K JA 1/8W
R1A6 4	01 037 0108	MT-GLAZE 5. OK JA 1/8W	R102	401 035 4900	MT-GLAZE IK JA 1/8W
R1A7 4	01 037 2102	MT-GLAZE 6.8K JA 1/8W	R112	401 035 7901	MT-GLAZE 1.5K JA 1/8W
R1A8 4	101 036 1205	MT-GLAZE 22 JA 1/8W	R113	401 036 9904	MT-GLAZE 560 JA 1/8W
RIA9 4	101 037 3703	MI-GLAZE 820 JA 1/8W MT-GLAZE 47K LA 1/8W	R114	401 037 3703	MT-GLAZE 820 JA 1/8W MT-GLAZE 560 JA 1/8W
R1F1 4	01 035 4900	MT-GLAZE 1K JA 1/8W	R116	401 035 4603	MT-GLAZE 100 JA 1/8W
R1F2 4	01 037 2102	MT-GLAZE 6.8K JA 1/8W	R117	401 035 6805	MT-GLAZE 1.2K JA 1/8W
R1F3 4	101 035 8007	MI-GLAZE 15K JA 1/8W	R118	401 036 6408	MT-GLAZE 390 JA 1/8W
R1F5 4	01 036 6503	MT-GLAZE 3.9K JA 1/8W	R121	401 035 5204	MT-GLAZE 10K JA 1/8W
R1F6 4	01 037 2102	MT-GLAZE 6.8K JA 1/8W	R122	401 037 0108	MT-GLAZE 5.6K JA 1/8W
R1F7 4	401 035 4900	MT-GLAZE 1K JA 1/8W	R123	401 037 0702	MT-GLAZE 560K JA 1/8W
RIF8 4	101 036 6507	MI-GLAZE 3.9K JA 1/8W MT-GLAZE 47K LA 1/8W	R124	401 036 8501	MI-GLAZE 47K JA 1/8W MT-GLAZE 33K IA 1/8W
R1J1 4	101 009 5803	CARBON 330 JA 1/2W	R131	401 036 8303	MT-GLAZE 4.7K JA 1/8W
R1J4 4	01 036 6606	MT-GLAZE 39K JA 1/8W	R132	401 035 4108	MT-GLAZE 0.000 ZA 1/8W
RIJ5 4	101 036 5104	MITULAZE 33K JA I/8W MTUGLAZE 33K LA 1/8W	R133	401 035 5204	MI-GLAZE TUK JA T/8W MT-GLAZE 10K LA 1/8W
R1J7 4	401 037 0405	MT-GLAZE 56K JA 1/8W	R136	401 036 5104	MT-GLAZE 33K JA 1/8W
R1J8 4	101 035 4603	MT-GLAZE 100 JA 1/8W	R137	401 035 8908	MT-GLAZE 16K JA 1/8W
R1J9 4	101 037 2102	MI-GLAZE 6.8K JA 1/8W	R138	401 037 0108	MI-GLAZE 5.6K JA 1/8W
R1K2 4	401 036 1700	MT-GLAZE 22K JA 1/8W	R141	401 037 0108	MT-GLAZE 5.6K JA 1/8W
R1K4 4	01 009 5803	CARBON 330 JA 1/2W	R142	401 035 5204	MT-GLAZE 10K JA 1/8W
R1L1 4	101 036 7801	MT-GLAZE 47 JA 1/8W	R143	401 035 4603	MT-GLAZE 100 JA 1/8W
R113 4	101 035 8007	MT-GLAZE ISK JA IZON MT-GLAZE 220 JA 1/8W	R146	401 035 5402	MT-GLAZE TOOK JA 1/8W
R1L4 4	01 012 5708	CARBON 1K JA 1/4W	R147	401 037 0108	MT-GLAZE 5.6K JA 1/8W
R1L5 4	101 037 3703	MT-GLAZE 820 JA 1/8W	R148	401 037 0108	MT-GLAZE 5.6K JA 1/8W
	101 035 7801 101 035 4900	MITULAZE 47 JA 1/8W MT-GLAZE 1K IA 1/8W	R149	401 037 1907	MT-GLAZE DOU JA 1/8W
R1L8 4	101 007 1104	CARBON 1K JA 1/2W	R152	401 036 5104	MT-GLAZE 33K JA 1/8W
R1L9 4	101 035 9301	MT-GLAZE 1.8K JA 1/8W	R153	401 035 7901	MT-GLAZE 1.5K JA 1/8W
RIMI 4	101 035 1700 101 035 3000	MI-GLAZE ZZK JA 1/8W MT-GLAZE 1K IA 1/8W	\| R154 \| R156	401 037 1907	MI-ULAZE 080 JA 1/8W
R1M3 4	101 036 7801	MT-GLAZE 47 JA 1/8W	R157	401 035 8007	MT-GLAZE 15K JA 1/8W
R1M4 4	101 035 8007	MT-GLAZE 15K JA 1/8W	R158	401 035 4900	MT-GLAZE 1K JA 1/8W
R1M5 4	401 012 5708	CARBON 1K JA 1/4W	R161	401 023 0709	CARBON 82 JA 1/4W
R1M7 4	101 035 0805	MT-GLAZE I.ZN JA 1/8W	B163	401 023 0709	CARBON 82 JA 1/4W
R1M8 4	401 035 4900	MT-GLAZE 1K JA 1/8W	R164	401 022 6801	CARBON 75 JA 1/4W
R1M9 4	401 036 7801	MT-GLAZE 47 JA 1/8W	R165	401 035 4603	MT-GLAZE 100 JA 1/8W
RINI 4	101 035 5408 101 063 0103	MITULAZE 390 JA I/814 NXINE-MT 68 IA 114	R160	401 035 4603	MI-GLAZE IUU JA I/8W MT-GLAZE 100 LA 1/8W
R1N3 4	401 036 7801	MT-GLAZE 47 JA 1/8W	R171	401 037 1907	MT-GLAZE 680 JA 1/8W
R1N4 4	101 035 8007	MT-GLAZE 15K JA 1/8W	R172	401 035 4108	MT-GLAZE 0.000 ZA 1/8W
KIN5 4	101 012 5708 101 035 4900	UARBUN IKJA 1/4W MT-GLAZE IK LA 1/8W	\| K1/3 \| R174	401 037 1907	MT-GLAZE 680 JA 1/8₩ MT-GLAZE 0.000 ZA 1/8₩

Page 46

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
R175 R176 R177	401 037 1907 401 035 4108 401 036 8303	MT-GLAZE 680 JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 4.7K JA 1/8W	R838 R839 R841	401 036 8303 401 035 5204 401 037 0108	MT-GLAZE 4.7K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 5.6K JA 1/8W
R181 R182	401 037 3802 401 036 9904	MT-GLAZE 8.2K JA 1/8W MT-GLAZE 560 JA 1/8W	R842 R843	401 036 8303 401 037 0108	MT-GLAZE 4.7K JA 1/8W MT-GLAZE 5.6K JA 1/8W
R183 R184	401 035 4603 401 036 5104	MT-GLAZE 100 JA 1/8W MT-GLAZE 33K JA 1/8W	R844 R845	401 036 8303 401 035 9806	MT-GLAZE 4.7K JA 1/8W MT-GLAZE 18K JA 1/8W
R185	401 036 6507	MT-GLAZE 3.9K JA 1/8W	R847	401 035 4900	MT-GLAZE 1K JA 1/8W
R187	401 036 5100	MT-GLAZE 33K JA 1/8W	R851	401 035 4900	MT-GLAZE TK JA 1/8W
R188 R192	401 037 0108 401 035 5204	MT-GLAZE 5.6K JA 1/8W MT-GLAZE 10K JA 1/8W	R852 R853	401 036 4800 401 035 4900	MT-GLAZE 3.3K JA 1/8W MT-GLAZE 1K JA 1/8W
R8H3	401 035 7901	MT-GLAZE 1.5K JA 1/8W	R854	401 016 9702	CARBON 27 JA 1/4W
R8K2	401 035 5204	MT-GLAZE 10K JA 1/8W	R856	401 036 4800	MT-GLAZE 3. 3K JA 1/8W
R8K3 R8K4	401 035 5204 401 035 5204	MI-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W	R857 R858	401 035 4900 401 016 9702	MT-GLAZE 1K JA 1/8W CARBON 27 JA 1/4W
R8K5 R8L1	401 035 5204	MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W	R861 R862	401 036 1908	MT-GLAZE 220K JA 1/8W
R8L2	401 035 5204	MT-GLAZE 10K JA 1/8W	R871	401 037 0108	MT-GLAZE 5.6K JA 1/8W
R8L4	401 035 5204 401 035 5204	MT-GLAZE TOK JA 1/8W	R872 R873	401 035 9301 401 036 1601	MT-GLAZE 1.8K JA 1/8W MT-GLAZE 2.2K JA 1/8W
R8L5 R8L6	401 035 5204 401 035 5204	MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W	R874 R875	401 035 5204 401 035 5204	MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W
R8L7 R8L8	401 035 5204	MT-GLAZE 10K JA 1/8W	R876	401 035 5204	MT-GLAZE 10K JA 1/8W
R8M3	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R881	401 033 3204	FUSIBLE RES 27 J- 1/4W
R8P1 R8P2	401 035 6805	MT-GLAZE I. 2K JA 1/8W MT-GLAZE 1. 2K JA 1/8W	R882 R891	401 037 1907 401 035 4603	MT-GLAZE 580 JA 1/8W MT-GLAZE 100 JA 1/8W
R8P3 R8P4	401 035 6805 401 035 6805	MT-GLAZE 1.2K JA 1/8W MT-GLAZE 1.2K JA 1/8W	R892 R893	401 035 4603	MT-GLAZE 100 JA 1/8W MT-GLAZE 1.2K JA 1/8W
R8P5	401 037 0108	MT-GLAZE 5.6K JA 1/8W	R894	401 035 6805	MT-GLAZE 1.2K JA 1/8W
R8P7	401 037 0108	MT-GLAZE 5.6K JA 1/8W	VARIABLE RE	SISTER
R8P8 R801	401 037 0108 401 035 4900	MT-GLAZE 5.6K JA 1/8W MT-GLAZE 1K JA 1/8W	VR1J1 VR121	610 232 7199 610 232 7250	VR B-10K VR B-500
R802 R803	401 035 5204	MT-GLAZE 10K JA 1/8W	VR151 VR161	610 232 7199	VR B-10K VR B-500
R804	401 035 5204	MT-GLAZE 10K JA 1/8W	VR803 -	610 232 7281	VR B-3K
R805 R806	401 035 4900 401 035 5204	MT-GLAZE TK JA T/8W MT-GLAZE 10K JA 1/8W	TRANSFORMER	2
R807 R808	401 035 5204 401 035 5204	MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W	T041	610 037 5536 610 037 5314	S COIL S COIL
R809 R810	401 035 5204	MT-GLAZE 10K JA 1/8W	T112	610 037 5314	S COIL
R811	401 035 4603	MT-GLAZE 100 JA 1/8W	T131	610 037 5336	S COIL
R812 R813	401 035 4603 401 035 4603	MI-GLAZE IUU JA 1/8W MT-GLAZE 100 JA 1/8W	COIL
R814 R815	401 035 4603 401 035 4603	MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W	L031	610 211 3488 610 029 5728	INDUCTOR PEAKING COLL
R816	401 035 4603	MT-GLAZE 100 JA 1/8W	L042	610 029 5582	PEAKING COLL 10UH J
R818	401 035 4603	MT-GLAZE 100 JA 1/8W	L052 L	610 029 5889	PEAKING COIL 5. 60H J
R819 R820	401 035 4603 401 035 5204	MT-GLAZE 100 JA 1/8W MT-GLAZE 10K JA 1/8W	L062 L063 L	610 030 0767 610 029 6466	DELAY LINE PEAKING COIL 8.20H K
R821 R822	401 025 1605	CARBON 1.5K JA 1/6W	L065	610 224 3864	DELAY LINE PEAKING COLL & 2014 K
R823	401 025 1605	CARBON 1. 5K JA 1/6W	L122 ~	610 220 7613	DELAY LINE
к824 R825	401 025 1605 401 037 0108	UARBUN 1.5K JA 1/6W MT-GLAZE 5.6K JA 1/8W	L123 -	610 031 3477	PEAKING COIL
R826 R828	401 035 6904 401 035 4603	MT-GLAZE 12K JA 1/8W MT-GLAZE 100 IA 1/8W		407 137 8/02	7ENER DIADE 82025-0119
R829	401 035 4603	MT-GLAZE 100 JA 1/8W	D001	407 070 9603	ZENER DIODE DZD11X-TA
R832	401 035 4900 401 035 4603	MT-GLAZE IN JA 1/8W	D002 D005	407 070 9603 407 071 7202	ZENER DIODE DZDIIX-IA ZENER DIODE DZD6. 2X-TA
R833 R834	401 035 8007 401 035 5204	MT-GLAZE 15K JA 1/8W MT-GLAZE 10K IA 1/8W	D006		ZENER DIODE DZD6.2X-TA DIODE DSB015-TA
R835	401 037 0108	MT-GLAZE 5.6K JA 1/8W	D1K1	407 071 6403	ZENER DIODE DZD5. 1X-TA
R837	401 037 2300	MT-GLAZE D8K JA 1/8W MT-GLAZE 10K JA 1/8W		407 052 4602	ZENEK DIUDE HZ483

Page 47

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
D1S1	407 048 5101	ZENER DIODE EQA02-09B	610 239	2128 AV CHA	NGE PCB ASSY E5SA	UE2575
D133 D134 D135 D136 D151 D152 D153 D154 D156 D158 D181 D191 D192	407 048 5200 407 004 8009 407 012 406 407 012 406 407 012 5809 407 07 9904	ZENER DIODE EQA02-09C DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE 1SS133 DIODE 1SS176 DIODE 1SS133 DIODE 1SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176 DIODE SS176	TRANSISTER 01000 01001 01002 01003 01100 01101 01102 01103 01104 01106 01106 01107 01108 01109 01110 01111	405 015 8704 405 016 2206 405 016 2206 405 015 8704 405 016 2206 405 015 8704 405 015 8704 405 016 2206 405 015 8704 405 018 2402 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2878-A TR 2SC2878-A TR 2SC2878-A TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA
D802 D803	407 012 4406 407 012 5809 407 007 9904 407 070 9603 407 070 9603	DIODE ISSI33 DIODE ISSI76 DIODE GMAO1 ZENER DIODE DZD11X-TA ZENER DIODE DZD11X-TA	INTEGRATED I C1000 I C1100 I C1101	CIRCUIT 409 073 1509 409 119 3702 410 067 3201	IC AN5265 IC LA7955 IC TEA2014A
D804 D805 D809 D811 D812 D813 D814 D821 D822 D823 D824 D825 D830 D831 D832 D834 D835 D837 D835 D837 D835 D837 D835 D837 D840 D841 D851 D852	407 070 9603 407 070 9603 407 070 9603 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 071 6403 407 071 6098 407 071 7004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 070 9603 407 070 9603 407 071 6403	ZENER DIODE DZD11X-TA ZENER DIODE DZD11X-TA ZENER DIODE DZD11X-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA ZENER DIODE DZD5.1X-TA DIODE DSB015-TA ZENER DIODE DZD5.6Y-TA ZENER DIODE DZD5.6Y-TA ZENER DIODE DZD5.6Y-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA ZENER DIODE DZD11X-TA ZENER DIODE DZD11X-TA ZENER DIODE DZD5.1X-TA	CAPACITOR C1000 C1001 C1002 C1003 C1004 C1005 C1006 C1007 C1008 C1009 C1010 C1011 C1012 C1102 C1103 C1104 C1105 C1106 C1107 C1108 C1107 C1108 C1113 C1114 C1117 C1118	403 125 5606 403 140 9207 403 074 9207 403 074 7706 403 074 7707 403 074 7706 403 074 7007 403 125 5606 403 126 6407 403 109 6407 403 191 7009 403 208 1402 403 107 9905 403 134 9602 403 134 9602 403 134	ELECT 100U M NP-ELECT 10U M CERAMIC 5600P K CERAMIC 0.047U K ELECT 100U M NP-ELECT 10U M CERAMIC 0.047U K ELECT 100U M NP-ELECT 10 M ELECT 10U M ELECT 1000 M ELECT 1000 M ELECT 100 M ELECT 10U M ELECT 47U M	16V 16V 50V 50V 25V 25V 25V 25V 25V 25V 25V 25V 25V 16V 16V 16V 16V 16V 16V 16V 16V
MISCELLANEL VC131 VC132 TH801 IC001 K001 K002 K003 K004 K005 V062	JS 610 003 0329 610 003 0329 407 015 0207 407 105 8700 610 206 1048 610 232 6147 610 239 1329 610 234 3786 610 234 3793 610 239 2753 610 239 2753	TRIMMER CONDENSER TRIMMER CONDENSER THERMISTOR SDT-250S-CTV PHOTO COUPLE PC113B DIN SOCKET COMBINATION JACK BOARD COMBINATION JACK BOARD PHONE JACK PHONE JACK PUSH SWITCH CEDANLC TRAD	C1118 C1119 C1120 C1121 C1122 C1123 C1124 C1125 C1126 C1127 C1129	403 069 9609 403 125 5606 403 134 9602 403 069 9609 403 107 9905 403 125 5606 403 134 6007 403 069 9609	CERAMIC 0.010 Z ELECT 100U M ELECT 47U M CERAMIC 0.010 Z ELECT 100 M ELECT 3300 M CERAMIC 0.010 Z	50V 16V 50V 16V 16V 16V 16V 16V 16V 16V 50V
X053 X131 X132 X801	610 012 2215 610 012 1250 610 012 1850 610 012 2734 610 012 2758 610 012 2857	CERAMIC TRAP CRYSTAL OSCILLATOR CRYSTAL OSCILLATOR CRYSTAL OSCILLATOR CRYSTAL OSCILLATOR CERAMIC OSCILLATOR	RESISTER R1000 R1001 R1002 R1003 R1004 R1005 R1006 R1007	401 035 5402 401 035 7109 401 035 5402 401 035 7109 401 035 7109 401 036 6408 401 037 0108 401 035 5204 401 037 0108	MT-GLAZE 100K JA MT-GLAZE 120K JA MT-GLAZE 100K JA MT-GLAZE 120K JA MT-GLAZE 390 JA MT-GLAZE 5.6K JA MT-GLAZE 10K JA MT-GLAZE 5.6K JA	1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W

Page 48

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
R1008	401 037 0405	MT-GLAZE 56K JA 1/8W	D1002	407 007 9904	DIODE GMA01
R1009 R1010 R1011 R1012 R1013	401 037 0405 401 037 0108 401 035 8007 401 019 6302 401 037 3703	MT-GLAZE 56K JA 1/8W MT-GLAZE 5.6K JA 1/8W MT-GLAZE 15K JA 1/8W CARBON 4.7 JB 1/4W MT-GLAZE 820 JA 1/8W	D1104	407 012 4406 407 012 5809 407 071 0005 407 071 0104 407 071 0203	DIODE 1SS133 DIODE 1SS176 ZENER DIODE DZD12X-TA ZENER DIODE DZD12Y-TA ZENER DIODE DZD127-TA
R1014 R1015 R1016	401 036 6507 401 036 1700 401 031 0607	MT-GLAZE 3.9K JA 1/8W MT-GLAZE 22K JA 1/8W	D1105	407 071 0005 407 071 0104	ZENER DIODE DZD12X-TA ZENER DIODE DZD12X-TA ZENER DIODE DZD12Y-TA
R1018 R1017 R1018	401 071 0607 401 070 8000 401 035 5204	OXIDE-MI ISJA 3W OXIDE-MT 12JA 3W MT-GLAZE 10KJA 1/8W	D1106 D1107	407 071 0203 407 004 8009 407 004 8009	ZENER DIODE DZD12Z-TA DIODE DSB015-TA DIODE DSB015-TA
R1019 R1020	401 037 1907 401 035 5204	MT-GLAZE 680 JA 1/8W MT-GLAZE 10K JA 1/8W	D1108 D1131	407 004 8009 407 075 9905	DIODE DSB015-TA ZENER DIODE E0A03-11A
R1102 R1103	401 035 4900 401 035 4900	MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W	D1132 D1133	407 075 9905	ZENER DIODE EQA03-11A
R1104 R1105	401 024 7004 401 024 7004	CARBON 1K JA 1/6W CARBON 1K JA 1/6W	D1134	407 075 9905	ZENER DIODE EQA03-11A
R1106 R1107	401 036 8808	MT-GLAZE 470K JA 1/8W	D1136	407 075 9905	ZENER DIODE EQA03-11A ZENER DIODE EQA03-11A
R1108	401 022 6801	CARBON 75 JA 1/4W	D1137 D1138	407 075 9905	ZENER DIODE EQA03-11A ZENER DIODE EQA03-11A
R1110	401 035 5204 401 036 8105	MT-GLAZE TUK JA 1/8W MT-GLAZE 470 JA 1/8W	D1139 D1140	407 075 9905 407 075 9905	ZENER DIODE EQAO3-11A ZENER DIODE EQAO3-11A
R1111 R1112	401 036 8105 401 035 4900	MT-GLAZE 470 JA 1/8W MT-GLAZE 1K JA 1/8W	D1141	407 075 9905	ZENER DIODE EQA03-11A
R1113 R1114 R1115	401 022 6801 401 035 5402 401 025 5402	CARBON 75 JA 1/4W MT-GLAZE 100K JA 1/8W	MISCELLANEU SW1001	S 610 011 2667	PUSH SWITCH
R1116 R1117	401 033 5402 401 024 6700 401 024 6700	CARBON 100 JA 1/6W CARBON 100 JA 1/6W CARBON 100 JA 1/6W	610 239 UE2576X1	4511 TM	COMPOUND PCB ASSY E5SA
R1120 R1121 R1122	401 036 5104 401 036 7801	MT-GLAZE 33K JA 1/8W MT-GLAZE 47 JA 1/8W	TRANSISTER
R1123	401 037 3703	MT-GLAZE 100 JA 1/8W MT-GLAZE 820 JA 1/8W	0202	405 002 6706 405 015 8704	TR 2SA1179-M6-TA TR 2SC2812-L6-TA
R1124 R1125	401 037 3703	MI-GLAZE 820 JA 1/8W CARBON 1.5K JA 1/6W	U204	405 018 0002 405 018 0101	TR 2SC3331-S TR 2SC3331-T
R1126 R1127	401 024 7004 401 035 9301	CARBON TK JA 1/6W MT-GLAZE 1.8K JA 1/8W	0205	405 003 5609 405 003 5708	TR 2SA1318-S TR 2SA1318-T
R1128 R1129	401 035 5204 401 035 5204	MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W	0222 0223	405 002 6706 405 015 8704	TR 2SA1179-M6-TA TR 2SC2812-L6-TA
R1130 R1131	401 037 4502 401 024 7004	MT-GLAZE 9.1K JA 1/8W CARBON 1K JA 1/6W	0224	405 018 0002	TR 2SC3331-S TR 2SC3331-T
R1132 R1133	401 027 8305	CARBON 820 JA 1/6W	0225	405 003 5609	TR 2503311 T TR 25A1318-5
R1134 R1135	401 036 3100	MT-GLAZE 27K JA 1/8W	0242	405 003 5708	TR 25A1318-1 TR 25A1179-M6-TA
R1136	401 036 1601	MT-GLAZE OSK JA 1/8W MT-GLAZE 2.2K JA 1/8W	0243 0244	405 015 8704 405 018 0002	TR 2SC2812-L6-TA TR 2SC3331-S
R1137 R1138	401 037 1907 401 037 1907	MI-GLAZE 680 JA 1/8W MT-GLAZE 680 JA 1/8W	0245	405 018 0101 405 003 5609	TR 2SC3331-T TR 2SA1318-S
R1139 R1140	401 035 5402 401 035 5402	MT-GLAZE 100K JA 1/8W MT-GLAZE 100K JA 1/8W	0291	405 003 5708 405 007 2901	TR 2SA1318-T TR 2SB544-E-MP
R1141 R1142	401 035 5204 401 036 1601	MT-GLAZE 10K JA 1/8W MT-GLAZE 2.2K JA 1/8W	0292	405 007 3106 405 015 8704	TR 2SB544-F-MP TR 2SC2812-L6-TA
R1143 R1144	401 035 4900	MT-GLAZE 1K JA 1/8W	0305	405 015 8704	TR 2502012 LO TA
R1145 R1146	401 020 0801	CARBON 470 JA 1/4W	0300	405 012 8708	TR 252812-L6-TA
R1140 R1147	401 008 1608	CARBON 1.8K JA 1/2W	0401 ·	405 015 8704 405 002 6706	TR 2SC2812-L6-TA TR 2SA1179-M6-TA
R1148 R1149	401 035 9301 401 024 6700	MI-GLAZE 1.8K JA 1/8W CARBON 100 JA 1/6W	0402 0403	405 015 8704 405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA
COIL			0404 0502	405 015 8704	TR 2SC2812-L6-TA TR 2SC2812-L6-TA
L1000	610 029 5988	PEAKING COIL	0511	405 002 6706	TR 2502012 LO TA TR 25A1179-M6-TA
DIODE	107 071 0000		0513	405 015 8704	TR 2SC3331-S
D1000	407 071 8902	ZENER DIODE DZD9. 1X-TA	0514	405 018 0101 405 003 5609	TR 2SC3331-T TR 2SA1318-S
01001	407 007 9904 407 012 4406	DIODE 1SS133	0522	405 003 5708 405 015 8704	TR 2SA1318-T TR 2SC2812-L6-TA
	407 012 5809	DIODE 1SS176	0531 0522	405 002 6706	TR 2SA1179-M6-TA

— 48 —

Page 49

Ref. No. Part No.	Description	Ref. No.	Part No.	Description
0533 405 018 0002 405 018 0101 0534 405 003 5609 405 015 8704 0551 405 002 6706 0552 405 015 8704 0553 405 018 0002 405 018 8002 405 018 0101 0554 405 003 5609	TR 2SC3331-S TR 2SC3331-T TR 2SA1318-S TR 2SA1318-T TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC3331-S TR 2SC3331-S TR 2SC3331-T TR 2SA1318-S	C215 C216 C217 C221 C222 C224 C225 C227 C228 C235	403 028 5000 403 028 5000 403 049 0800 403 041 9405 403 134 5505 403 069 9609 403 049 0800 403 121 3408 403 069 9609 403 028 5000	CERAMIC 56P J CERAMIC 56P J ELECT 10 M ELECT 100 M ELECT 100 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z CERAMIC 56P J	50V 50V 50V 16V 25V 50V 50V 50V 50V 50V 50V
405 003 5708 0571 405 015 8704 06303 405 015 8704 06303 405 015 8704 06304 405 015 8704 06305 405 015 8704 06306 405 015 8704 06307 405 015 8704 06307 405 015 8704 06307 405 015 8704 06313 405 015 8704 06314 405 015 8704 06323 405 015 8704 06324 405 015 8704 06331 405 015 8704 06332 405 015 8704 06333 405 015 8704 06334 405 015 8704 06335 405 02 6706 06362 405	TR 2SA1318-T TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SC2812-L6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA TR 2SA1179-M6-TA	C236 C237 C241 C242 C244 C245 C246 C247 C248 C255 C256 C257 C261 C263 C264 C263 C264 C265 C266 C267 C268 C266 C267 C268 C269 C270 C274 C275 C276 C277 C278	403 028 5000 403 049 0800 403 134 5505 403 049 9609 403 049 0800 403 049 9609 403 049 0800 403 049 9609 403 121 3408 403 069 9609 403 028 5000 403 028 5000 403 069 9609 403 050 0509 403 050 1307 403 069 9609 403 051 1307 403 069 9609 403 051 1307 403 069	CERAMIC 56P J ELECT 100 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z ELECT 2.20 M CERAMIC 0.010 Z CERAMIC 0.010 Z CERAMIC 56P J CERAMIC 0.010 Z ELECT 4.70 M CERAMIC 0.010 Z ELECT 4.70 M CERAMIC 0.010 Z	50V 50V 16V 25V 50V 50V 50V 50V 50V 50V 50V 50V 50V 5
INTEGRATED CIRCUIT 1C201 409 274 3401 1C301 409 240 7303 1C302 409 157 7403 1C401 409 294 4105 1C402 409 022 0805 1C402 409 022 1809 1C571 409 196 2605 1C572 409 124 5708 1C6201 409 280 5208 1C6302 409 280 5208 1C6304 409 251 1406 1C6305 409 251 1406 1C6306 409 251 1406 1C6310 409 251 1406 1C6311 409 251 1406 1C6312 409 251 1406 1C6313 409 251 1406 1C6314 409 280 5307 1C6316 409	IC LA7665M IC CXA1216P IC AN614 IC LC32060A-772 IC LC74HCU04 IC MC74HC04AF-R1 IC L78H09T IC UPD6326C IC MB40568PF-TP-T1 IC UPD42102G-3 IC UPD42102G-3 IC UPD42102G-3 IC LC9123A-511 IC LC9123A-511 IC LC9123A-511 IC LC9123A-511 IC UPD42102G-3 IC UPD42102G-3 IC WB40968VPF IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F IC MC74HC4053F	C286 C289 C290 C291 C292 C293 C294 C301 C306 C312 C313 C314 C315 C357 C361 C362 C363 C364 C365 C366 C368 C369 C370 C371 C372 C373 C374 C375 C376 C377	403 069 9609 403 041 9405 403 069 9609 403 043 9601 403 125 5606 403 069 9609 403 067 6709 403 049 6300 403 049 6300 403 042 8308 403 048 6902 403 048	CERAMIC 0.010 Z ELECT 100 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z ELECT 10 M CERAMIC 0.010 Z CERAMIC 0.010 Z ELECT 470 M ELECT 470 M CERAMIC 0.010 Z CERAMIC 100 M CERAMIC 0.00 ZA	50V 16V 50V 50V 50V 50V 16V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50

Page 50

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
C385	403 069 9609	CERAMIC 0.01U Z 50V	C553	403 071 8201	CERAMIC 2200P K	50V
C401	403 183 4405	NP-ELECT 33U M 16V	C571	403 069 9609	CERAMIC 0 0111 7	50V
C405	403 059 9800	POLYESTER 2700P J 50V	C572	403 109 6100	ELECT 22011 M	35V
	403 060 0308	POLYESTER 2700P J 50V	C573	403 069 9609	CERAMIC 0.01U Z	50V
C406	403 062 9101	POLYESTER 6800P J 50V	C574	403 134 5802	ELECT 470U M	16V
	403 062 9804	POLYESTER 6800P J 50V	C575	403 069 9609	CERAMIC 0.01U Z	50V
C407	403 059 2801	POLYESTER 2200P J 50V	C576	403 125 5408	ELECT 100U M	35V
	403 059 3402	POLYESTER 2200P J 50V	C577	403 069 9609	CERAMIC 0.01U Z	50V
C409	403 060 0308	POLYESTER 2700P J 50V	C578	403 130 2805	ELECT 220U M	10V
	403 179 2309	POLYESTER 2700P J 50V	C579	403 069 9609	CERAMIC 0.01U Z	50V
C411	403 179 4501	NP-ELECT 0.47U M 50V	C580	403 069 9609	CERAMIC 0.01U Z	50V
C412	403 069 1801	CERAMIC 1000P K 50V	C581	403 125 5408	ELECT 100U M	35V
C413	403 009 6200	CERAMIC 100P J 50V	C582	403 069 9609	CERAMIC 0.01U Z	50V
C414	403 009 6200	CERAMIC 100P J 50V	C583	403 069 9609	CERAMIC 0.01U Z	50V
0415	403 009 6200	CERAMIC TOOP J 50V	C584	403 043 9601	ELECT 47U M	16V
	403 070 2705	CERAMIC 0. IU Z 50V	C585	403 119 8408	ELECT 47U M	50V
	403 043 9601		C6201	403 043 9601	ELECT 47U M	16V
0419	403 010 2105		06202	403 069 9609	CERAMIC 0.010 Z	50V
0420	403 012 4000		06203	403 041 9405	ELECI IOU M	160
C421	403 022 0300		6204	403 069 9609		50V
0422	403 043 3001		0200	403 009 9009		500
C/2/	403 010 2103		00207	403 101 1103
C425	403 132 1000	CERAMIC 0.0111.7 50V	0209	403 009 9009		50V 16V
C432	403 070 2705		C0210	403 042 0308		501
C433	403 043 9601	FIFCT 4711 M 16V	C6304	403 003 5005	FIECT ATLLM	16V
C434	403 070 2705	CERAMIC 0 111 7 50V	C6305			50V
C435	403 075 0805	CERAMIC 6800P K 50V	6306	403 0/1 9/05		16V
C436	403 070 2705	CERAMIC 0.1U Z 50V	6307	403 049 0800	FLECT 111 M	50V
C437	403 058 0303	POLYESTER 1500P J 50V	C6308	403 043 9601	FLECT 4711 M	16V
	403 058 0907	POLYESTER 1500P J 50V	C6309	403 070 2705	CERAMIC 0 111 7	50V
C438	403 043 9601	ELECT 47U M 16V	C6310	403 043 9601	ELECT 47U M	16V
C439	403 070 2705	CERAMIC 0.1U Z 50V	C6312	403 070 2705	CERAMIC 0.1U Z	50V
C450	403 125 5002	NP-ELECT 1U M 50V	C6313	403 043 9601	ELECT 47U M	16V
C451	403 075 0805	CERAMIC 6800P K 50V	C6314	403 070 2705	CERAMIC 0.1U Z	50V
C453	403 071 8201	CERAMIC 2200P K 50V	C6315	403 043 9601	ELECT 47U M	16V
C454	403 070 2705	CERAMIC 0.1U Z 50V	C6316	403 070 2705	CERAMIC O. 1UZ	50V
C455	403 012 4606	CERAMIC 15P J 50V	C6318	403 070 2705	CERAMIC O. 1UZ	50V
C456	403 070 2705	CERAMIC 0.1U Z 50V	C6319	403 022 9004	CERAMIC 33P J	50V
C457	403 019 7907	CERAMIC 27P J 50V	C6320	403 008 8205	CERAMIC 10P D	50V
0458	403 070 2705	CERAMIC 0.10 Z 50V	C6324	403 043 9601	ELECT 47U M	16V
0459	403 043 9601	ELECI 4/UM 16V	C6325	403 070 2705	CERAMIC 0.1U Z	50V
	403 075 0805		06327	403 049 0800	ELECI IU M	50V
0401	403 125 5002		06328	403 043 9601	ELECI 4/U M	16V
U40Z	403 039 3901		00329	403 070 2705	CERAMIC U. IU Z	509
C463	403 039 0700		00330	403 043 9001
C463	403 010 2105		C0332	403 070 2703
0465	403 070 2705	CERAMIC 0 111 7 50V	10000	403 043 3001		50V
C466	403 010 6404	CERAMIC 12P I 50V	00334	403 043 9601	FLECT A711 M	16V
C501	403 049 0800	ELECT 1U M 50V	C6336	403 070 2705	CERAMIC 0 111 7	50V
C502	403 121 3408	ELECT 2. 2U M 50V	C6338	403 070 2705	CERAMIC 0.10 2	50V
C503	403 121 3408	ELECT 2. 2U M 50V	C6340	403 009 6101	CERAMIC 100P	50V
C504	403 070 2705	CERAMIC 0.1U Z 50V	C6341	403 125 5002	NP-ELECT 111 M	50V
C509	403 070 2705	CERAMIC 0.1U Z 50V	C6342	403 125 5002	NP-ELECT 111 M	50V
C511	403 134 5505	ELECT 10U M 25V	C6343	403 042 8308	ELECT 2211 M	16V
C513	403 071 8201	CERAMIC 2200P K 50V	C6348	403 208 1402	TA-SOLID 111 M	25V
C521	403 049 0800	ELECT 1U M 50V	C6349	403 008 8205	CERAMIC 10P D	50V
C522	403 121 3408	ELECT 2.2U M 50V	C6351	403 029 8000	CERAMIC 6P D	50V
C523	403 121 3408	ELECT 2.2U M 50V	C6360	403 009 6101	CERAMIC 100P J	50V
C524	403 070 2705	CERAMIC 0.1U Z 50V	C6361	403 043 9601	ELECT 47U M	16V
C529	403 070 2705	CERAMIC 0.1U Z 50V	C6362	403 043 9601	ELECT 47U M	16V
0531	403 134 5505	ELECT 10U M 25V	C6363	403 070 2705	CERAMIC 0.1U Z	50V
0533	403 071 8201	CERAMIC 2200P K 50V	C6364	403 070 2705	CERAMIC 0.1U Z	50V
6541	403 049 0800	ELECT TO M 50V	C6365	403 192 1006	IA-SOLID 47U M	6. 3V
0542	403 121 3408	ELEUT 2.20 M 50V	C6366	403 070 2705	CERAMIC 0.10 Z	50V
0043	403 121 3408	CEPANIC 2.20 M 50V	C6367	403 208 1402	IA-SOLID 10 M	25V
0044 (5/0	403 010 2103		66359	403 008 8205	UERAMIC 10P D	507
0049 0551	400 010 2100 102 121 EENE			403 029 8000		507
0001	403 134 3303		00378	403 069 9609	LERAMIC 0.010 Z	5UV

Page 51

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
C6379 C6381 C6382 C6383 C6384 C6386 C6387 C6387 C6572 C6573	403 043 9601 403 073 3600 403 073 3600 403 070 2705 403 192 1006 403 167 1703 403 069 9609 403 070 2705 403 041 9405	ELECT 47U M 16V CERAMIC 390P K 50V CERAMIC 390P K 50V CERAMIC 0.1U Z 50V CERAMIC 0.1U Z 50V TA-SOLID 47U M 6.3V TA-SOLID 3.3U M 16V CERAMIC 0.01U Z 50V CERAMIC 0.1U Z 50V CERAMIC 0.1U Z 50V CERAMIC 0.1U Z 50V ELECT 10U M 16V	R287 R291 R292 R293 R294 R295 R323 R324 R325 R324 R325	401 035 5204 402 001 7703 401 010 3102 401 012 5708 401 035 9806 401 035 9806 401 035 6904 401 035 6904 401 037 1907	MT-GLAZE 10K JA 1/8W FUSIBLE RES 56 J- 1/4W CARBON 470 JA 1/2W CARBON 1K JA 1/4W MT-GLAZE 18K JA 1/8W MT-GLAZE 27K JA 1/8W MT-GLAZE 12K JA 1/8W MT-GLAZE 12K JA 1/8W MT-GLAZE 12K JA 1/8W MT-GLAZE 12K JA 1/8W
C6387 C6572 C6573 RESISTER R201 R202 R203 R207 R209 R210 R212 R213 R214 R215 R216 R217 R215 R216 R217 R218 R219 R221 R222 R227 R229 R220 R230 R232 R233 R234 R235 R236 R237 R238 R234 R235 R236 R237 R238 R237 R238 R239 R241 R242 R243 R242 R243 R247 R249 R250 R250 R255 R256 R257	403 069 9609 403 070 2705 403 041 9405 401 036 1700 401 035 4900 401 035 4108 401 037 0405 401 036 1601 401 036 8303 401 036 8303 401 036 1700 401 036 1601 401 037 0405 401 036 1601 401 036	CERAMIC 0.01U Z 50V CERAMIC 0.1U Z 50V ELECT 10U M 16V MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 56K JA 1/8W MT-GLAZE 56K JA 1/8W MT-GLAZE 56K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 5.6 K JA 1/8W MT-GLAZE 1/0 JA 1/4W CARBON 100 JA 1/4W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 56K JA 1/8W MT-GLAZE 2.2 K JA 1/8W MT-GLAZE 2.2 K JA 1/8W	R323 R324 R325 R326 R327 R328 R329 R331 R333 R334 R350 R351 R352 R353 R354 R353 R354 R363 R364 R365 R366 R367 R363 R364 R365 R366 R367 R368 R369 R366 R367 R368 R369 R370 R371 R368 R369 R370 R371 R372 R374 R375 R376 R377 R374 R375 R376 R377 R371 R372 R374 R375 R376 R377 R371 R372 R374 R375 R376 R377 R371 R372 R374 R375 R376 R377 R381 R382 R383 R384 R386 R387 R389 R390 R402 R403 R405 R406 R407	401 035 6904 401 035 6904 401 035 1907 401 035 4900 401 035 4108 401 035 5204 401 035 400 401 035 400 401 035 5204 401 036 1601 401 036 7801 401 036 7801 401 036	MI-GLAZE 12K JA 1/8W MT-GLAZE 12K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1.2K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 1/8W JA 1/8W MT-GLAZE
R257 R258 R259 R260 R262 R263 R264 R265 R266 R267 R268 R267 R268 R269 R270 R271 R274 R275 R276 R276 R276 R280 R281 R282 R286	401 012 4503 401 036 8303 401 035 4108 401 035 4108 401 035 5204 401 035 5204 401 036 4800 401 035 5901 401 036 4800 401 035 7901 401 036 1035 401 036 5104 401 035 408 401 035 408 401 035 409 401 035 4090 401 035	CARBUN 100 JA 1/4W MT-GLAZE 4. 7K JA 1/8W MT-GLAZE 5. 6K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 22K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 3.3K JA 1/8W MT-GLAZE 3.3K JA 1/8W MT-GLAZE 3.3K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 2.2M JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.4W 1/8W MT-GLAZE 1.4W 1/8W MT-GLAZE 3.9K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 1.0W 1	R407 R408 R410 R411 R412 R414 R415 R416 R418 R421 R423 R424 R423 R424 R425 R427 R430 R431 R432 R434 R435 R436 R437	401 036 1601 401 036 1601 401 025 7805 401 036 6903 401 036 6903 401 035 4108 401 035 4603 401 035 4108 401 036 1601	MT-GLAZE 2. 2K JA 1/8W MT-GLAZE 2. 2K JA 1/8W CARBON 2. 2K JA 1/6W MT-GLAZE 330 JA 1/8W MT-GLAZE 390K JA 1/8W MT-GLAZE 390K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.

Page 52

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
R438 R439 R440	401 036 4800 401 035 4306 401 035 5402	MT-GLAZE 3.3K JA 1/8W MT-GLAZE 10 JA 1/8W MT-GLAZE 100K IA 1/8W	R555 R556 R571	401 012 3407 401 012 4503 401 062 0302	CARBON 10 JA CARBON 100 JA	1/4₩ 1/4₩ 1₩
R441	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R572	401 002 0302	CARBON 120 JA	1/2₩
R447	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R574	401 035 9806	MT-GLAZE 18K JA	1/8₩
R450 R452	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R575 R6205	401 035 3100	MI-GLAZE 27K JA MT-GLAZE 100 IA	1/8₩ 1/8₩
R453	401 090 8202	MT-GLAZE 750K JA 1/8W	R6206	401 035 4603	MT-GLAZE 100 JA	1/8₩
R454	401 036 8501	MT-GLAZE 47K JA 1/8W	R6207	401 035 4603	MT-GLAZE 100 JA	1/8W
R455 R456	401 037 1402	MT-GLAZE 6.2K JA 1/8W	R6208	401 087 6204	MT-GLAZE 5.6K.JA	1/6W 1/8W
R457	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6210	401 037 2102	MT-GLAZE 6.8K JA	1/8₩
R458	401 035 5204	MT-GLAZE 10K JA 1/8W	R6211	401 037 2102	MT-GLAZE 6.8K JA	1/8W
R461	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6212	401 035 5204	MT-GLAZE TOK JA	1/8W
R462	401 035 5204	MT-GLAZE 10K JA 1/8W	R6214	401 037 0108	MT-GLAZE 5.6K JA	1/8₩
R464 R465	401 036 1601	MT-GLAZE 2.2K JA 1/8W	R6215	401 035 5204	MT-GLAZE 10K JA	1/8₩ 1/9₩
R466	401 035 5204	MT-GLAZE 10K JA 1/8W	R6217	401 035 5203	MT-GLAZE 10K JA	1/8₩
R467	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6218	401 035 7901	MT-GLAZE 1.5K JA	1/8W
R408	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6219 R6220	401 035 7901	MI-GLAZE I.5K JA MT-GLAZE 2.7K JA	1/8₩ 1/8₩
R476	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6222	401 036 1700	MT-GLAZE 22K JA	1/8W
R480 R481	401 037 3802	MT-GLAZE 8.2K JA 1/8W	R6224	401 037 0108	MT-GLAZE 5.6K JA	1/8₩ 1/9₩
R482	401 035 4300	MT-GLAZE 150K JA 1/8W	R6225	401 036 1700	MT-GLAZE 47K JA	1/8₩
R483	401 035 4306	MT-GLAZE 10 JA 1/8W	R6228	401 036 1601	MT-GLAZE 2.2K JA	1/8W
R484 R485	401 035 5402	MT-GLAZE TUOK JA TZ8W MT-GLAZE 6.8K JA 1Z8W	R6230 R6231	401 037 3802	MI-GLAZE 8.2K JA MT-GLAZE 12K LA	1/8₩ 1/8₩
R486	401 035 4900	MT-GLAZE 1K JA 1/8W	R6232	401 037 2102	MT-GLAZE 6.8K JA	1/8₩
R487	401 035 4306	MT-GLAZE 10 JA 1/8W	R6233	401 035 4900	MT-GLAZE 1K JA	1/8₩
R489	401 035 5402	MT-GLAZE TOOK JA 1/8W	R6253	401 036 8303	MI-GLAZE 4.7K JA MT-GLAZE 6.8K JA	1/8W 1/8W
R501	401 035 4108	MT-GLAZE 0.000 ZA 1/8W	R6255	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩
R502 R503	401 037 0108	MT-GLAZE 5.6K JA 1/8W	R6271	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩ 1/9₩
R504	401 036 4701	MT-GLAZE 330 JA 1/8W	R6272	401 035 4108	MT-GLAZE 0.000 ZA	1/8W
R508	401 035 4603	MT-GLAZE 100 JA 1/8W	R6274	401 035 4108	MT-GLAZE 0.000 ZA	1/8W
R509	401 036 8501	MI-GLAZE 39K JA 1/8W MT-GLAZE 47K JA 1/8W	R6291	401 035 4108	MI-GLAZE 0.000 ZA	1/8W 1
R511	401 036 6507	MT-GLAZE 3.9K JA 1/8W	R6293	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩
R512 R513	401 036 6507	MT-GLAZE 3.9K JA 1/8W	R6294	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩ 1/9₩
R514	401 012 4303	CARBON 10 JA 1/4W	R6296	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩
R515	401 012 3407	CARBON 10 JA 1/4W	R6297	401 036 1700	MT-GLAZE 22K JA	1/8₩
R516	401 012 4503	UARBUN 100 JA 1/4W MT-GLAZE 0.000 ZA 1/8W	R6301	401 035 4900	MI-GLAZE IKJA MT-GLAZE IKJA	1/8₩ 1/8₩
R522	401 037 0108	MT-GLAZE 5.6K JA 1/8W	R6305	401 035 4108	MT-GLAZE 0.000 ZA	1/8W
R523	401 037 3703	MT-GLAZE 820 JA 1/8W	R6306	401 035 4306	MT-GLAZE 10 JA	1/8W
R528	401 035 4603	MT-GLAZE SSO JA 1/8W	R6309	401 035 4108	MT-GLAZE 0.000 ZA	1/8W
R529	401 036 6606	MT-GLAZE 39K JA 1/8W	R6310	401 035 4900	MT-GLAZE 1K JA	1/8W
R530 R531	401 036 8501	MI-GLAZE 4/KJA-1/8W MT-GLAZE 3.9K IA-1/8W	R6311 R6312	401 035 4900	MI-GLAZE 1K JA MT-GLAZE 1K JA	1/8₩ 1/8₩
R532	401 036 6507	MT-GLAZE 3.9K JA 1/8W	R6313	401 037 1907	MT-GLAZE 680 JA	1/8W
R533	401 012 4503	CARBON 100 JA 1/4W	R6314	401 035 5204	MT-GLAZE 10K JA	1/8₩
R535	401 012 3407	CARBON 10 JA 1/4W	R6315	401 035 9301	MI-GLAZE I. 8K JA MT-GLAZE IK IA	1/8₩
R536	401 012 4503	CARBON 100 JA 1/4W	R6318	401 036 4800	MT-GLAZE 3. 3K JA	1/8W
8541 8542		MI-GLAZE O.000 ZA 1/8W	R6321	401 035 4900	MT-GLAZE 1K JA	1/8W
R543	401 037 3703	MT-GLAZE 820 JA 1/8W	R6323	401 035 7901	MT-GLAZE 1.5K JA	1/8W
R544	401 036 4701	MT-GLAZE 330 JA 1/8W	R6324	401 035 4900	MT-GLAZE 1K JA	1/8₩
R548 R549	401 035 4603	MI-ULAZE IOU JA 1/8W MT-GLAZE 39K IA 1/8W	R6325 R6326	401 035 4900	MI-GLAZE IKJA MT-GLAZE ISKIA	1/8W 1/8W
R550	401 036 8501	MT-GLAZE 47K JA 1/8W	R6327	401 035 4108	MT-GLAZE 0.000 ZA	1/8₩
R551	401 036 6507	MT-GLAZE 3.9K JA 1/8W	R6329	401 035 4108	MT-GLAZE 0.000 ZA	1/8W
R553	401 012 4503	CARBON 100 JA 1/4W	R6331	401 035 4900	MITOLAZE IN JA MTOLAZE IN JA	1/8W
R554	401 012 3407	CARBON 10 JA 1/4W	R6332	401 035 4900	MT-GLAZE 1K JA	1/8W

— 52 —

Page 53

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
Ref. No. R6333 R6335 R6336 R6337 R6338 R6341 R6345 R6341 R6345 R6346 R6347 R6350 R6351 R6352 R6353 R6361 R6362 R6363 R6364 R6366 R6366 R6367 R6371 R6372 R6374 R6375 R6376 R6382	Part No. 401 037 1907 401 035 7901 401 035 5204 401 035 5204 401 035 54900 401 035 4900 401 035 4108 401 035 400	Description MT-GLAZE 680 JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1 K JA 1/8W MT-GLAZE 1 K JA 1/8W MT-GLAZE 1 K JA 1/8W MT-GLAZE 1 K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 1 SK JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000	Ref. No. R6584 L261 L351 L371 L401 L402 L404 L561 L571 L6304 L6311 L6362 VARIABLE RE VR201 VR202 VR241 VR262 VR263 VR264 VR266 VR502	Part No. 401 036 4800 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 087 6204 401 035 4108 SISTER 610 232 7342 610 238 3744 610 232 7342 610 238 3744 610 232 7342 610 238 3744 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342 610 232 7342	Description MT-GLAZE 3. 3K JA 1/8W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W CARBON 0.000 ZA 1/6W MT-GLAZE 0.000 ZA 1/6W WR B-50K VR B-30K VR B-2K VR B-50K
R6382 R6386 R6402 R6403 R6404 R6471 R6472 R6473 R6474 R6475 R6476 R6476 R6477 R6478 R6481 R6481 R6482 R6483 R6483 R6484 R6485 R6485 R6486 R6487 R6488 R6489 R6489 R6489 R6490	401 035 5402 401 035 5402 401 035 4108 401 035 403 401 035 4603 401 035 4603 401 035 5204 401 035 4603 401 035	MT-GLAZE 100K JA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 0.000 ZA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 10K JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 100 JA 1/8W<	VR512 VR522 VR531 VR542 VR551 VR6202 VR6301 VR6302 VR6341 VR6570 VR6601 TRANSFORMEF T401 T402 T403 C01L L301 L301 L301 L301 L301 L531 L551	610 232 7175 610 232 7342 610 232 7199 610 232 7311 610 231 2751 610 231 2758 610 221 7353 610 224 3864 610 029 5780	VR B-2K VR B-50K VR B-50K VR B-50K VR B-50K VR B-10K VR B-10K VR B-10K VR B-10K VR B-10K VR B-10K VR B-5K S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS S TRANS
R6493 R6494 R6495 R6501 R6502 R6521 R6522 R6541 R6542 R6542 R6570 R6571 R6572 R6573 R6574 R6575 R6576 R6577 R6580 R6581 R6581 R6582 R6583	401 035 5204 401 035 6904 401 035 6904 401 035 4900 401 035 403 401 035 8303 401 036	MT-GLAZE 10K JA 1/8W MT-GLAZE 12K JA 1/8W MT-GLAZE 4.7K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 1K JA 1/8W MT-GLAZE 100 JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 1.5K JA 1/8W MT-GLAZE 4.7K JA 1/8W MT-GLAZE 4.7K JA 1/8W MT-GLAZE	L6301 L6308 L6312 L6313 L6315 L6361 L6371 D10DE D201 D221 D241 D261 D262 D291 D405 D406 D407 D501 L D502 D503	610 215 1374 610 029 5681 610 215 1374 610 217 7459 610 217 7459 407 004 8009 407 012 102 407 091 2102 407 091 2102 407 048 80901 407 048 9901 407 048 8099 407 004 8009 407 005	LC BLOCK PEAKING COIL LC BLOCK LC BLOCK LC BLOCK PEAKING COIL 270UH J PEAKING COIL 270UH J DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA ZENER DIODE DZD8.2X-TA VARACTOR DI SVC201SPA VARACTOR DI SVC201SPA DIODE DSB015-TA ZENER DIODE EQA02-25A DIODE DSB015-TA ZENER DIODE EQA02-25A DIODE DSB015-TA

Page 54

E5SA

Ref. No.	Part No.	Description	Ref. No.	Part No.	Description
D521 D522 D523 D541 D542 D543 D571 D572 D573 D6472 D6473 D6473 D6473 A D6474 D6474 D6475 D6475A D6476 D6476A D6570	407 048 9901 407 004 8009 407 005 9807 407 005 9807 407 004 8009 407 005 9807 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 004 8009 407 144 8600 610 232 5485 610 229 8888 407 042 7309 610 229 8888 407 042 5404 610 229 8888 407 042 7309 610 229 8888 407 042 7309 610 229 8888 407 042 7309 610 229 8888 407 042 7309 610 229 8888 407 042 7309 610 229 8888	ZENER DIODE E0A02-25A DIODE DSB015-TA DIODE ERA81-004 ZENER DIODE E0A02-25A DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA DIODE DSB015-TA LED TLY144 SHIELD LIGHT LED HOLDER-S2AS LED TLR144 LED HOLDER-S2AS LED TLG144 LED HOLDER-S2AS LED TLR144 LED HOLDER-S2AS LED TLR144 LED HOLDER-S2AS LED TLR144 LED HOLDER-S2AS LED TLR144 LED HOLDER-S2AS	OUT OF C01L L901 MISCELLANEU ▲LP901 EL901 EL902 EL903 FN901 FN902 K6AAS SP901 SW904 SW905 ▲T901 W002	PB ASS 'Y 610 236 5504 5 610 243 2152 610 245 3270 610 245 3263 610 245 3256 610 233 8553 610 233 1264 610 239 1312 610 055 5461 610 055 5464 610 220 0010 610 229 8505 610 233 0632 610 234 0581	PIPE CORE METAL HALIDE LAMP (S5WJ) (RED) LCD ALM0305-00 (GREEN) LCD ALM0305-00 (BLUE) LCD ALM0305-00 MOTER FAN AC SOCKET SPEAKER SPEAKER SPEAKER SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH
MISCELLANEUS SW6401 SW6402 SW6471 SW6472	S 610 239 4160 610 232 5782 610 011 4432 610 011 2667 1528 LED PB	PUSH SWITCH PUSH SWITCH PUSH SWITCH PUSH SWITCH	W902 W903 W911 W912 W913	610 240 5811 610 240 5804 610 234 6305 610 237 2311 610 237 2304 610 234 6305 610 237 2304 610 237 2311	CABLE CABLE FPC CABLE (K2R-RLCD) FPC CABLE (K2R-RLCD) FPC CABLE (K2G-GLCD) FPC CABLE (K2G-GLCD) FPC CABLE (K2B-BLCD) FPC CABLE (K2B-BLCD)
RESISTER R1901 R1902 R1903 R1904 R1905 R1906 R1907 R1906 R1907 R1908 R1909 R1910 R1910 R1911 R1921 R1922 R1923 R1924 R1925 R1926 R1925 R1926 R1927 R1928 R1929 R1930 R1931	401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802 401 036 0802	ASS T UEZDIOX2 MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W MT-GLAZE 2K JA 1/8W	ACCESSORIES W901	610 239 1374 645 000 1642 645 000 4520 645 000 1659	AC POWER CORD (MODEL PLC-200P) AC POWER CORD (MODEL PLC-200PB) AC POWER CORD (MODEL PLC-200PB) AC POWER CORD (MODEL PLC-200PP)
DIODE D1901 D1902 D1903 D1904 D1905 D1906 D1907 D1908 D1909 D1910 D1911	407 144 8501	LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87 LED SLM-1251MW T87

— 54 —

Page 55

OPTICAL PARTS

Caution;

★..... Coating face of the mirror.

OPTICAL PARTS LIST

KEY NO.		PART NO.	DESCRIPTION
1.	٢	610 232 5454	LENS ASS'Y (PROJECTION)
		610 238 4017	LENS COVER (TOP)
		610 238 4024	LENS COVER (BOTTOM)
	ę	610 238 4062	FOCUS MOTOR
	C	610 238 4079	ZOOM MOTOR
2.	L.	610 233 0472	MIRROR (DICHROIC-B)
3.			GREEN LCD PANEL ASS'Y
			(SEE LCD PANEL PARTS LIST)
4.	γ	610 233 0465	MIRROR (DICHROIC-G2)
5.			BLUE LCD PANEL ASS'Y
			(SEE LCD PANEL PARTS LIST)
6.	4	610 233 4296	MIRROR (FOR RED)
7.	Ľ-	610 243 211-2	LAMP ASS'Y (LP901A)
		2 - 3	(SEE ELECTRICAL PARTS LIST)
8.		645 000 9242	(UV CUT FILTER)
9.	Г	610 233 0441	MIRROR (DICHROIC-R)
10.	L	610 233 0458	MIRROR (DICHROIC-G1)
11.			RED LCD PANEL ASS'Y
			(SEE LCD PANEL PARTS LIST)
12.	L.	610 233 4289	MIRROR (FOR BLUE)

Page 56

Page 57

		LIST
KEY NO.	PART NO.	DESCRIPTION
1.	610 232 8752	TRANSPARENT BOARD
2.	610 223 9751	BRAND BADGE
З.	610 237 8924	LENS COVER
4.	610 237 3738	FRONT CABINET
	411 077 1102	SCREW 4 X 10MM (2 USED)
5.	610 239 8540	SIDE CABINET (RIGHT)
	411 077 1102	SCREW 4 X 10MM (3 USED)
6.	610 243 1803	TOP CABINET ASS'Y (INCLUDED A-I)
А.	610 241 0785	DOOR
В.	610 239 8588	DOOR DECORATION PLATE
C.	610 232 9124	MAGNET CATCHER (2 USED)
D.	411 112 6604	SCREW 2 X 4MM (2 USED)
E.	610 208 0544	MAGNET HOLDER (2 USED)
F.	610 233 2438	HANDLE
G.	411 148 5701	FIXED PIN (2 USED)
Н.	610 232 8806	HANDLE MOUNTING PARTS (2 USED)
Ι.	411 077 1102	SCREW 4 X 10MM (2 USED)
7.	610 235 1088	AIR FILTER COVER
8.	610 232 9704	SPONGE
9.	610 236 5306	AIR FILTER
10.	610 235 1019	SIDE CABINET (LEFT)
	411 077 1102	SCREW 4 X 10MM (3 USED)
11.	610 239 3286	BUTTON (10 USED)
12.	610 232 3429	POWER BUTTON
13.	610 240 6313	REAR CABINET
	411 077 1102	SCREW 4 X 10MM (2 USED)
	411 075 7908	SCREW 3 X 12MM (4 USED)
14.	610 099 3952	MAINS ON/OFF BUTTON
15.	610 240 1189	REAR DECORATION PLATE (RIGHT)
16.	610 232 2019	LAMP COVER
	411 077 1102	SCREW 4 X 10MM (2 USED)
17.	610 239 8632	REAR DECORATION PLATE (LEFT)
18.	610 232 3436	INT. SP ON/OFF BUTTON
19.	610 232 2002	BOTTOM CABINET
	411 077 1102	SCREW 4 X 10MM (4 USED)
20.	610 236 0264	REAR STAND
	610 237 2267	SPRING
21.	411 152 3700	LEG. STOPPER (2 USED)
22.	610 239 9899	LEG. ASSEMBLY (2 USED) INCLUDED A-I
А.	411 149 4406	STOPPER
В.	412 045 2206	SPECIAL NUT
C.	610 239 9974	LEGA
D.	411 152 6701	WASHER-A
E.	610 239 9981	LEGB
F.	411 152 4004	WASHER-B
G.	411 092 2405	WASHER-C
Н.	411 025 5206	SCREW 3 × 10MM
L	610 240 0021	CUSHION

ACCESSORIES PARTS LIST

KEY NO.	PART NO.	DESCRIPTION
	610 239 7055	OWNER'S MANUAL (MODEL PLC-200P)
	610 239 7673	OWNER'S MANUAL (MODEL PLC-200PB/PP)
	610 233 0489	DUST COVER
	610 239 7123	RC TRANSMITTER ASS'Y
	610 233 5026	RC BATTERY COVER
	610 234 0969	RC CABLE

Page 58

LCD PANEL PARTS LIST

ANEL
PART NO.	DESCRIPTION
610 245 3249	RED LCD PANEL ASS'Y
412 043 7609	SCREW 2 X 4 (7 USED)
610 232 2231	RETAINER POLARIZED GLASS-A
610 233 4272	POLARIZED GLASS (2 USED)
610 232 2248	RETAINER POLARIZED GLASS-B (4 USED)
411 102 4108	SCREW 3.2 X 2.5 (4 USED)
610 245 3300	RED LCD PANEL
610 232 5942	RETAINER POLARIZED GLASS-C
411 045 6009	SCREW, 3 X 6MM (2 USED)
412 037 7509	SPECIAL SCREW (4 USED)
412 043 7609	SPECIAL SCREW (4 USED)
411 148 7804	WASHER (4 USED)
412 037 7202	SPECIAL SCREW (2 USED)
411 016 0500	RING-E (2 USED)
610 232 5461	CONDENSER LENS
	PART NO. PART NO. 610 245 3249 412 043 7609 610 232 2231 610 233 4272 610 232 2248 411 102 4108 610 245 3300 610 232 5942 411 045 6009 412 037 7509 412 043 7609 411 148 7804 412 037 7202 411 016 0500 610 232 5461

Page 59

LCD PANEL PARTS LIST

	BLUE LCD PANEL
KEY NO.	PART NO.	DESCRIPTION
1.	් 610 245 3225	BLUE LCD PANEL ASS'Y
А.	412 043 7609	SCREW 2 X 4 (7 USED)
В.	610 232 2231	RETAINER POLARIZED GLASS-A
C.	610 233 4272	POLARIZED GLASS (2 USED)
D.	610 232 2248	RETAINER POLARIZED GLASS-B (4 USED)
E.	411 102 4108	SCREW 3.2 X 2.5 (4 USED)
F.	610 245 3287	BLUE LCD PANEL
G.	610 232 5942	RETAINER POLARIZED GLASS-C
2.	411 045 6009	SCREW, 3 X 6MM (2 USED)
З.	412 037 7509	SPECIAL SCREW (4 USED)
4.	412 043 7609	SPECIAL SCREW (4 USED)
5.	411 148 7804	WASHER (4 USED)
6.	412 037 7202	SPECIAL SCREW (2 USED)
7.	411 016 0500	RING-E (2 USED)
8.	610 232 5461	CONDENSER LENS

Page 60

GREEN PANEL

LCD PANEL PARTS LIST

GREEN LCD PANEL

KEY NO.	PART NO.	DESCRIPTION
1.	610 245 3232	GREEN LCD PANEL ASS'Y
А.	412 043 7609	SCREW 2 X 4 (7 USED)
В.	610 232 2231	RETAINER POLARIZED GLASS-A
C.	610 233 4272	POLARIZED GLASS (2 USED)
D.	610 232 2248	RETAINER POLARIZED GLASS-B (4 USED)
E.	411 102 4108	SCREW 3.2 X 2.5 (4 USED)
F.	610 245 3294	GREEN LCD PANEL
G.	610 232 5942	RETAINER POLARIZED GLASS-C
2.	411 045 6009	SCREW, 3 X 6MM (2 USED)
3.	610 232 5461	CONDENSER LENS

Page 61

VOLTAGE AND WAVEFORMS

1. TRANSISTORS VOLTAGE CHART

	E(V)	C(V)	B(V)		E(V)	C(V)	B(V)		E(V)	C(V)	B(V)
Q0P1	4.9	11.5	5.5	Q153	2.4	11.5	2.9	Q381	0	0	0.7
Q041	6.2	11.5	6.8	Q171	2.4	11.6	2.7	Q382	0	3.1	0
Q042	6.2	11.5	6.8	Q172	2.4	11.6	2.7	Q401	1.9	0	1.2
Q061	0	0	10.6	Q173	2.4	11.6	2.7	Q402	4.2	4.9	4.8
Q062	0	11.5	0	Q174	2.4	11.6	2.6	Q403	0	0	0.7
Q063	1.5	11.5	0	Q175	2.4	11.6	2.6	Q404	4.1	4.9	4.7
Q069	5.0	11.5	0	Q176	2.4	11.6	2.6	Q502	- 16.4	- 8.4	- 15.8
Q1A1	3.6	11.6	4.2	Q177	2.6	11.6	3.2	Q511	8.1	0	7.5
Q1F1	6.8	11.6	7.4	Q179	3.2	0	2.6	Q512	6.9	15.0	7.5
Q1F2	0	0	6.8	Q181	0.6	0	0	Q513	7.2	1.1	8.1
Q1F3	0	4.4	0	Q182	0.1	11.5	0.6	Q514	7.5	0.2	0
Q1F4	0	0	0.1	Q183	0	5.2	0	Q522	0	- 8.4	- 15.8
Q1F5	8.4	8.3	7.8	Q184	0	0	4.8	Q531	7.7	0	7.1
Q1H1	- 1.2	11.6	- 0.7	Q202	8.1	0	7.5	Q532	6.5	15.0	7.1
Q1H2	- 1.8	5.8	- 1.2	Q203	6.8	15.0	7.4	Q533	7.1	14.8	0.7
Q1H3	5.3	6.2	5.8	Q204	7.5	14.8	8.1	Q534	7.1	0.2	6.5
Q1H4	4.6	11.6	5.3	Q205	7.4	0.2	6.8	Q542	0	- 8.3	- 15.8
Q1H5	4.0	11.6	4.6	Q222	8.0	0	7.4	Q551	7.8	0	7.2
Q1H6	- 1.1	11.6	- 0.5	Q223	6.8	15.0	7.4	Q552	6.6	15.0	7.2
Q1H7	- 1.1	11.6	- 0.5	Q224	7.4	14.8	8.0	Q553	7.2	14.8	7.8
Q1H8	3.4	6.5	4.0	Q225	7.4	0.2	6.8	Q554	7.2	0.2	6.6
Q1H9	5.9	11.6	6.5	Q242	8.1	0	7.4	Q571	0	0	- 0.4
Q1J1	3.4	6.5	4.0	Q243	6.8	15.0	7.4	Q601	0.3	- 1.9	13.3
Q1J2	5.9	11.6	6.5	Q244	7.5	14.8	8.1	Q602	0	- 1.4	- 1.9
Q1J3	3.4	11.6	4.0	Q245	7.4	0.2	6.8	Q603	0	309	- 1.4
Q131	0	11.5	0	Q291	- 7.5	- 17.0	0	Q604	10.8	19.8	11.4
Q132	0	11.5	0	Q292	0	4.9	0	Q606	10.8	- 1.0	10.8
Q151	11.3	1.3	11.0	Q305	3.8	9.1	2.0	Q607	0	10.8	0
Q152	2.2	11.0	2.9	Q306	2.6	0	1.8	Q801	0	0	4.8

Downloaded from www.Manualslib.com manuals search engine

Page 62

	E(V)	C(V)	B(V)		E(V)	C(V)	B(V)	E(V)	B(V)
Q802	0	0	4.8	Q1109	5.9	11.5	6.5
Q803	0	11.1	0.2	Q1110	0	0	4.8
Q804	0	0	4.8	Q1111	0	0.1	0.7
Q805	0	0	4.8	Q6303	2.7	11.6	0.1
Q806	0	0	4.4	Q6304	0.8	11.6	1.4
Q821	4.9	10.3	5.5	Q6305	0.8	2.9	1.4
Q829	0	8.7	0	Q6306	2.3	11.6	2.9
Q831	0	0	8.7	Q6307	1.7	11.6	2.3
Q842	0.1	0.2	0.8	Q6313	0	11.6	2.8
Q843	0.8	0.8	1.5	Q6314	0.8	11.6	1.4	-
Q844	0	0.1	0.8	Q6323	0	11.6	3.4		,
Q847	0	10.6	0	Q6324	0.8	11.6	1.4
Q848	0	9.4	0	Q6331	2.3	9.1	3.0
Q861	0	3.1	0	Q6332	2.3	9.1	3.0
Q871	0	3.9	0.1	Q6333	3.3	9.1	1.0
Q872	0	4.8	0	Q6334	3.3	9.1	3.3
Q1000	5.4	11.5	6.0	Q6335	3.3	0	3.3
Q1001	5.4	11.5	6.0	Q6336	3.3	0	3.3
Q1002	0	0.1	0.7	Q6337	3.9	0	3.9
Q1003	1.2	5.7	1.8	Q6362	3.4	11.6	3.9
Q1100	2.3	11.5	2.9	Q6364	3.4	11.6	3.9
Q1101	5.9	11.5	6.5	Q6471	8.1	0	8.0
Q1102	0.3	11.5	0	Q6570	2.3	0	0
Q1103	11.5	0	11.5	Q6571	9.8	7.4	9.2
Q1104	0	11.4	0.1	Q6572	7.4	5.4	0.1
Q1105	3.0	11.5	3.6	Q6573	7.4	0	8.6
Q1106	0	0	0.2	Q6574	8.6	0	8.0
Q1107	3.0	11.5	3.6	Q6575	1.2	11.6	5.4
Q1108	0	0	0.2	Q6576	8.2	0	8.0

Page 63

2. IC VOLTAGE CHART

Pin	V	Pin	V	Pin	V	Pin	V
ICO	001	9	11.7	IC1	A1	10	5.1
1	- 2.8	10	0	1	0.8	11	5.1
2	0	11	11.7	2	1.0	12	4.0
3	0	12	0	3	4.1	13	1.5
4	0	13	5.7	4	7.7	14	0
5	4.8	14	5.7	5	3.7	15	1.5
6	0	15	5.7	6	6.7	16	5.1
IC	041	16	11.7	7	4.9	IC.	IL1
1	0	IC	052	8	2.8	GROUND	0
2	0	1	3.0	9	0	IN	- 14.2
3	0	2	0	10	11.7	OUT	- 7.9
4	11.7	3	3.0	11	2.2
5	7.7	4	4.7	12	0.7
6	0	5	11.7	. 13	.7.4
7	7.8	IC	061	14	3.2
8	7.1	1	0	15	4.5
9	11.7	2	0	16	9.1
10	7.7	3	0	17	1.4
11	7.0	4	0	18	6.3
. 12	7.8	5	7.8	IC	IK1
IC	051	6	0	1	0
1	0	7	7.7	2	2.0
2	5.7	8	7.0	3	5.1
3	5.7	9	11.7	4	3.3
4	5.7	10	7.7	5	0.7
5	5.1	11	7.0	6	0
6	0	12	7.8	7	1.5
7	0			8	0
8	0			9	1.5

Page 64

Pin	V	Pin	V	Pin	V	Pin	V
IC	101	IC ^.	102	IC	201	29	2.5
1	7.4	1	2.7	1	0	30	2.2
2	7.7	2	5.1	2	4.8	31	- 4.9
3	7.4	3	2.7	3	0.2	32	3.4
4	4.5	4	5.4	4	4.9	33	0
5	3.9	5	2.7	5	0.2	34	- 0.8
6	8.8	6	11.5	6	3.2	35	0
7	4.0	7	4.9	7	2.8	36	0
8	4.5	8	3.2	8	0	37	- 7.5
9	0	9	9.8	9	3.2	38	- 1.0
10	2.3	10	1.5	10	0	39	0
11	2.3	11	0	11	0.2	40	- 1.1
12	7.9	12	8.2	12	3.2	41	0
13	11.5	13	8.3	13	3.2	42	0
14	5.7	14	8.2	14	0	43	0
15	3.2	15	6.9	15	0	44	0
16	7.9	16	3.5	16	1.6	45	0
17	3.0	17	7.0	17	0	46	0
18	7.7	18	7.0	18	0	47	0
19	5.0	19	2.9	19	2.8	48	- 0.6
20	5.6	20	2.7	20	0	49	4.9
21	5.5	21	4.5	21	0	50	3.3
22	4.1	22	4.3	22	0	51	3.3
23	0	23	4.5	23	2.4	52	2.5
24	1.5	24	0	24	1.8	53	2.4
25	0	25	6.7	25	0	54	2.2
26	0	26	1.2	26	0.2	55	2.4
27	10.6	27	3.0	27	1.3	56	2.2
28	0	28	0	28	1.4	57	2.9

Page 65

Pin	V	Pin	V	Pin	V	Pin	V
IC	201	21	0	13	0	42	4.9
58	3.3	22	0	14	0	43	2.4
59	3.2	23	2.6	15	0	44	0.8
60	3.3	24	3.1	16	0	45	1.2
61	0	25	4.5	17	0	46	4.9
62	0	26	4.0	18	0	47	0.2
63	3.0	27	3.1	19	0	48	4.6
64	0	28	9.1	20	4.8	49	2.3
IC	301	ICS	302	21	0	50	0.3
1	0.1	1	2.4	22	0	51	1.4
2	0	2	4.5	23	0	52	0
3	0.1	3	4.1	24	0	53	0
4	7.0	4	0	25	0	54	0
5	3.9	5	2.4	26	2.4	55	2.3
6	3.9	6	9.2	27	1.7	56	1.4
7	5.4	7	6.3	28	0	57	0
8	5.2	IC4	401	29	0	58	0.2
9	0	1	4.8	30	2.5	59	2.4
10	1.3	2	0	31	4.9	60	4.9
11	3.7	3	0	32	2.4	61	0
12	3.7	4	0	33	2.4	62	0
13	6.9	5	0	34	2.4	63	1.6
14	4.5	6	0.1	35	0	64	0
15	3.2	7	0.2	36	0	65	2.1
16	5.5	8	0.1	37	2.4	66	2.1
17	3.1	9	4.9	38	0	67	0.8
18	5.8	10	0	39	0	68	0.9
19	3.2	11	0	40	4.8	69	4.1
20	5.7	12	0	41	0	70	4.4

Page 66

Pin	V	Pin	V	Pin	V	Pin	V
IC	401	3	4.1	3	2.5	28	2.3
71	4.5	4	0	IC	801	29	4.9
72	4.4	5	0	1	4.9	30	2.1
73	4.9	6	4.9	2	4.9	31	2.3
74	2.7	7	0	3	4.9	32	0
75	2.8	8	4.9	4	4.9	33	4.2
76	2.5	9	0	5	4.9	34	4.9
77	0	10	4.9	6	0	35	4.9
78	4.4	11	0	7	0	36	4.9
79	4.2	12	4.9	8	0	37	4.9
80	4.2	13	0	9	0	38	4.9
IC4	402	14	4.9	10	0	39	4.9
1	2.4	IC571		11	4.9	40	4.9
2	3.0	IN	19.5	12	0	41	4.9
3	0	GROUND	0	13	5.2	42	4.9
4	4.9	OUT	15.0	14	0	43	4.9
5	2.5	IC	572	15	0	44	0
6	2.5	IN	11.6	16	0	45	0
7	0	GROUND	0	17	4.8	46	0
8	2.4	OUT	9.1	18	0	47	0
9	2.5	ICe	501	19	0	48	0
10	4.9	1	0	20	0	49	0
11	0	2	7.5	21	0	50	0
12	3.0	3	5.1	22	4.9	51	4.9
13	2.4	4	5.1	23	4.9	52	4.9
14	4.9	5	6.7	24	4.9	53	4.9
IC4	104	ICe	602	25	4.9	54	4.9
1	0.8	1	10.7	26	4.9	55	0.2
2	4.1	2	0	27	0	56	4.9

Page 67


Pin	V	Pin	V	Pin	V	Pin	V
IC	801	7	11.7	4	0	3	0.1
57	0	8	11.7	5	6.5	4	0
58	0	9	0.7	6	11.5	5	0
59	0	10	0.5	7	4.6	6	0.1
60	0	ICt	352	8	0	7	2.4
61	0	1	0	9	6.5	8	0
62	4.9	2	0.5	10	0	9	2.4
63	3.9	3	0.7	11	3.6	10	5.3
64	4.9	4	5.1	12	4.9	11	5.3
IC	802	5	0	13	4.9	12	8.1
1	4.9	6	0	14	4.9	13	5.2
2	4.9	7	11.7	15	3.6	14	5.2
3	0	8	11.7	16	0	15	10.7
IC	803	9	0.7	17	4.9	16	11.6
1	4.9	10	0.5	18	4.9
2	4.9	IC1	000	19	4.9
3	4.9	1	11.7	20	3.6
4	4.9	2	5.3	IC1	101
5	0	3	0	1	0
6	4.9	4	2.8	2	2.7
7	4.9	5	11.2	3	2.7
8	4.9	6	11.3	4	0
IC	851	7	0	5	10.8
1	0	8	11.4	6	2.6
2	0.5	9	23.6	7	11.5
3	0.7	IC1	100	8	2.5
4	5.1	1	4.6	ICe	5201
5	0	2	0	1	4.9
6	0	3	4.6	2	0.2

Page 68

Pin	V	Pin	V	Pin	V	Pin	V
ICe	301	4	1.4	8	0	8	0
1	0	5	2.6	9	0.1	9	0
2	0	6	0.3	10	2.7	10	2.3
3	1.5	7	0.2	11	1.4	11	0
4	2.3	8	0.2	12	1.4	12	0
5	1.5	9	3.5	13	1.9	13	0
6	1.4	10	0.4	14	1.4	14	0
7	2.8	11	0	15	0	15	3.9
8	0.9	12	0	16	3.7	16	4.9
9	0.5	13	4.9	17	2.9
10	1.6	14	4.9	18	0
11	0	15	0	19	4.9
12	0	16	0.7	20	3.9
13	4.9	17	3.5	21	0
14	4.9	18	3.9	22	3.4
15	1.7	19	3.9	23	4.9
16	. 2.4	20	2.9	24	4.9
17	3.4	21	2.9	25	0.3
18	3.4	22	4.9	26	0.7
19	3.9	23	4.9	27	3.1
20	2.9	24	0	28	1.3
21	2.9	IC6	312	IC6	313
22	4.9	1	1.5	1	3.9
23	4.9	2	2.2	2	3.9
24	0	3	1.7	3	0
ICe	302	4	1.8	4	0
1	0	5	1.4	5	0
2	1.8	6	4.5	6	0
3	1.5	7	0	7	0		I

Page 69

Pin	u V u	Pin	V
IC6	314	8	0
1	0	9	0.2
2	1.7	10	2.3
3	1.5	11	0.2
4	1.7	12	3.3
5	1.6	13	3.5
6	4.6	14	3.3
7	3.9	15	3.3
8	0	16	4.9
9	4.5	PC	601
10	0	1	11.7
11	3.4	2	10.7
12	0.1	3	0.1
13	3.9	4	- 1.9
14	0	5	13.3
15	1.6	6	0.4
16	1.6
17	1.6
18	1.6
19	0
20	4.9
IC6	316
1	3.3
2	3.3
3	3.3
4	3.5
5	3.5
6	0
7	0

Downloaded from www Manualslib com manuals search engine

Page 70

3. WAVEFORMS

Page 71

Downloaded from www.Manualslib.com manuals search engine

Page 72

A14800 Oct./'92/1000 SI

SANYO

SANYO Electric Co., Ltd. Printed in Japan

Pin	V	Pin	V	Pin	V	Pin	V
IC	201	21	0	13	0	42	4.9
58	3.3	22	0	14	0	43	2.4
59	3.2	23	2.6	15	0	44	0.8
60	3.3	24	3.1	16	0	45	1.2
61	0	25	4.5	17	0	46	4.9
62	0	26	4.0	18	0	47	0.2
63	3.0	27	3.1	19	0	48	4.6
64	0	28	9.1	20	4.8	49	2.3
IC	301	ICS	302	21	0	50	0.3
1	0.1	1	2.4	22	0	51	1.4
2	0	2	4.5	23	0	52	0
3	0.1	3	4.1	24	0	53	0
4	7.0	4	0	25	0	54	0
5	3.9	5	2.4	26	2.4	55	2.3
6	3.9	6	9.2	27	1.7	56	1.4
7	5.4	7	6.3	28	0	57	0
8	5.2	IC4	401	29	0	58	0.2
9	0	1	4.8	30	2.5	59	2.4
10	1.3	2	0	31	4.9	60	4.9
11	3.7	3	0	32	2.4	61	0
12	3.7	4	0	33	2.4	62	0
13	6.9	5	0	34	2.4	63	1.6
14	4.5	6	0.1	35	0	64	0
15	3.2	7	0.2	36	0	65	2.1
16	5.5	8	0.1	37	2.4	66	2.1
17	3.1	9	4.9	38	0	67	0.8
18	5.8	10	0	39	0	68	0.9
19	3.2	11	0	40	4.8	69	4.1
20	5.7	12	0	41	0	70	4.4

Pin	V	Pin	V	Pin	V	Pin	V
IC	201	21	0	13	0	42	4.9
58	3.3	22	0	14	0	43	2.4
59	3.2	23	2.6	15	0	44	0.8
60	3.3	24	3.1	16	0	45	1.2
61	0	25	4.5	17	0	46	4.9
62	0	26	4.0	18	0	47	0.2
63	3.0	27	3.1	19	0	48	4.6
64	0	28	9.1	20	4.8	49	2.3
IC	301	ICS	302	21	0	50	0.3
1	0.1	1	2.4	22	0	51	1.4
2	0	2	4.5	23	0	52	0
3	0.1	3	4.1	24	0	53	0
4	7.0	4	0	25	0	54	0
5	3.9	5	2.4	26	2.4	55	2.3
6	3.9	6	9.2	27	1.7	56	1.4
7	5.4	7	6.3	28	0	57	0
8	5.2	IC4	401	29	0	58	0.2
9	0	1	4.8	30	2.5	59	2.4
10	1.3	2	0	31	4.9	60	4.9
11	3.7	3	0	32	2.4	61	0
12	3.7	4	0	33	2.4	62	0
13	6.9	5	0	34	2.4	63	1.6
14	4.5	6	0.1	35	0	64	0
15	3.2	7	0.2	36	0	65	2.1
16	5.5	8	0.1	37	2.4	66	2.1
17	3.1	9	4.9	38	0	67	0.8
18	5.8	10	0	39	0	68	0.9
19	3.2	11	0	40	4.8	69	4.1
20	5.7	12	0	41	0	70	4.4

Sanyo PLC-200P, PLC-200PB, PLC-200PP Service Manual

Contents

ORIGINAL VERSION

SAFETY INSTRUCTIONS

SAFETY PRECAUTIONS

PRODUCT SAFETY NOTICE

SPECIFICATIONS

FUNDAMENTAL PRINCIPLES OF LIQUID CRYSTAL PROJECTOR

Liquid crystal projector conceptual diagram

SYSTEM CONTROL

All systems are controlled by IC801 (CPU).

1. Power ON/OFF.

2. Input selection.

3. Digital control .

4. On screen display.

5. Volume control.

6. Lamp monitor.

7. Temperature monitor.

8. Lamp replacement monitor.

9. Zoom and Focus motor control.

MOVING THE PROJECTOR

TROUBLE SHOOTING GUIDE

USING THE REMOTE CONTROL UNIT (wireless)

USING THE REMOTE CONTROL UNIT (wired)

SETTING-UP THE PROJECTOR

ROOM LIGHT

LEVELING AND ELEVATING ADJUSTMENTS

USING THE PROJECTOR TO TURN ON THE PROJECTOR

TO TURN OFF THE PROJECTOR (with the remote control unit)

TO TURN OFF THE PROJECTOR (without the remote control unit)

ADJUST THE PROJECTOR

VIDEO MODE SELECT

VOLUME ADJUSTMENT

SOUND MUTE ADJUSTMENT

PICTURE AND SOUND ADJUSTMENTS

CONNECTING TO THE AV1 INPUT JACKS

S-VHS FORMAT VCR CONNECTION

CONNECTING TO THE AV2 21-PIN TERMINAL

CONNECTING TO THE AUDIO MONITOR OUTPUT JACK

12 LAMP REPLACEMENT & TEMPERATURE WARNING INDICATORS

LAMP REPLACEMENT INDICATOR

TEMPERATURE WARNING INDICATOR

TROUBLESHOOTING CHART

LAMP REPLACEMENT

WARNING

THIS LAMP IS OPERATED UNDER HIGH PRESSURE. FOR CONTINUED SAFETY, REPLACE WITH A LAMP OF THE SAME TYPE. UNPLUG THE PROJECTOR FROM THE POWER OUTLET BEFORE THE PROJECTION LAMP IS REPLACED. DO NOT ATTEMPT TO CHANGE A HOT LAMP. BE CAREFUL NOT TO TOUCH THE LAMP OR MIRROR WITH OILY FINGERS.

RECOMMENDATION

HOW TO CHECK THE LAMP ILLUMINATION TIME

1. Checking procedure

BMFL

Note: If the RESET button is pressed, the data of illumination time will be initialized.

MECHANICAL DISASSEMBLIES

POWER BOARD REMOVAL

POWER TRANS REMOVAL

SIDE FAN REMOVAL

LCD UNIT REMOVAL

Downloaded from www.Manualslib.com manuals search engine

LCD PANEL ASS'Y REPLACEMENT

LCD PANEL REPLACEMENT

POLARIZING GLASS ADJUSTMENT

OPTICAL ADJUSTMENTS

Optical path adjustment

• Optical path adjustment.

FOCUS ADJUSTMENTS

G-LCD Panel Unit Position Adjustment (G Focus Adjustment)

R-LCD Panel Unit Position Adjustment (R Focus Adjustment).

B-LCD Panel Unit Position Adjustment (B Focus Adjustment).

CONVERGENCE ADJUSTMENTS

Before Adjustment:

R Panel Adjustment

B Panel Adjustment

CLEANING METHODS

Air Spray cleaning Method

Caution:

Disassembly cleaning Method

Caution:

Disassemble and clean the LCD panel units.

Caution:

Mirrors

Caution:

Pin	V	Pin	V	Pin	V	Pin	V
IC	201	21	0	13	0	42	4.9
58	3.3	22	0	14	0	43	2.4
59	3.2	23	2.6	15	0	44	0.8
60	3.3	24	3.1	16	0	45	1.2
61	0	25	4.5	17	0	46	4.9
62	0	26	4.0	18	0	47	0.2
63	3.0	27	3.1	19	0	48	4.6
64	0	28	9.1	20	4.8	49	2.3
IC	301	ICS	302	21	0	50	0.3
1	0.1	1	2.4	22	0	51	1.4
2	0	2	4.5	23	0	52	0
3	0.1	3	4.1	24	0	53	0
4	7.0	4	0	25	0	54	0
5	3.9	5	2.4	26	2.4	55	2.3
6	3.9	6	9.2	27	1.7	56	1.4
7	5.4	7	6.3	28	0	57	0
8	5.2	IC4	401	29	0	58	0.2
9	0	1	4.8	30	2.5	59	2.4
10	1.3	2	0	31	4.9	60	4.9
11	3.7	3	0	32	2.4	61	0
12	3.7	4	0	33	2.4	62	0
13	6.9	5	0	34	2.4	63	1.6
14	4.5	6	0.1	35	0	64	0
15	3.2	7	0.2	36	0	65	2.1
16	5.5	8	0.1	37	2.4	66	2.1
17	3.1	9	4.9	38	0	67	0.8
18	5.8	10	0	39	0	68	0.9
19	3.2	11	0	40	4.8	69	4.1
20	5.7	12	0	41	0	70	4.4