Sanyo PID-42A User Manual

INSTRUCTION MANUAL	PID-42AE1
	PID-42AS1

LCD Monitor

Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.

TABLE OF CONTENTS. . . . . . . . . . . . . 2

SAFETY PRECAUTIONS. . . . . . . . . . . . 3

Installation and Use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SERVICING. . . . . . . . . . . . . . . . . . 4

Servicing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Federal Communications Commission Notice . . . . . . . . . . 5

AC Power Cord Requirement . . . . . . . . . . . . . . . . . . . . . . . 6

End-User License. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

INSTALLATION . . . . . . . . . . . . . . . . 8

Step: 1 Mains Connection.. . . . . . . . . . . . . . . . . . . . . . . . . 8 Step: 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote control battery installation. . . . . . . . . . . . . . . . . . . 9 Controls and Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Menu Operation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Picture menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MENU OPERATION. . . . . . . . . . . . . . 11

Picture menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Time menu.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Setup menu.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PC Adj.. menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

INSTALLATION MODE . . . . . . . . . . . . 13

Installation Mode.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

OPERATION. . . . . . . . . . . . . . . . . 14

Selection of picture size . . . . . . . . . . . . . . . . . . . . . . . . . . .14 PIP/POP Operation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

OPERATION (IN TEXT MODE). . . . . . . . . 16

Teletext Operation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

SPECIFICATIONS/HELPFUL HINTS. . . . . . . .17

Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Helpful hints.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

DIMENSIONS. . . . . . . . . . . . . . . . 18

PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST. . . . . . . . . . . . . . . . . . . . 19

RS232C COMMAND TABLES. . . . . . . . . . 20

Standard monitor (PID-42AE1)

●EXTENSIVE INPUT & OUTPUT TERMINALS (for all products)

This monitor set has various input and output terminals including component (Y,Pb,Pr) or RGBHV input and output with 5-BNC, composite video input and output with BNC, and RS-232 control port (serial D-Sub 9) input and output which offer the daisy chain connection.. There are computer inputs (a D-Sub 15 RGB terminal) and DVI-D input with HDCP for High definition signals. There are also jacks for external speakers.

Daylight readable monitor (PID-42AS1)

In addition to Standard monitor, it has adaptive brightness in accordance with prevailing light conditions..

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation..

SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the following basic rules for its installation, use and servicing..

Installation and Use

Do not allow anything to rest on the power cord.. Do not locate this LCD monitor where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension

cords as this can result in fire or electric shock.

A suitable socket outlet must be provided near to the monitor and shall be easily accessible.. Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

Do not place your LCD monitor on an unstable stand, shelf or table.. Serious injury to an individual, and damage to the LCD monitor may result if it should fall.. Your sales person can recommend an approved wall mounting kit. A special wall mounting kit is available for this model..

This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating Instructions.. If you are not sure of the type of power supply, consult your sales person or your local power company..

For added protection it is strongly recommended that this LCD monitor has its mains supplied via an approved earth fault protection device..

WARNING: To prevent injury the LCD monitor must be securely attached to the wall in accordance with the manufacturers installation instructions..

IMPORTANT:

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead is unplugged. The installer must make sure that the mains plug is easily accessible..

Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor from the wall socket.

Do not mount near an open flame source. Open flames must never be used near this LCD monitor..

This LCD monitor should not be built in or enclosed in any way, heat build up will reduce the life of the monitor..

This LCD monitor should have a minimum distance of 5cm away from the wall and the monitor should have 10cm distance around the top and sides..

Always mount using recommended and substantial fixtures and fittings..

10cm

5cm


10cm				10cm

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This monitor must NOT be permanently mounted to the building structure.. It must be mounted in such a way that it can be removed using basic tools..

The power supply cord must NOT be attached to the building surface.. The power supply cord must NOT be routed through walls, ceiling, floors, or other similar openings in the building structure.

The power supply cord MUST be positioned so as to prevent physical damage..

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.

This equipment is fitted with an approved mains lead and an approved non rewireable UK mains plug.. To change a fuse in this type of plug proceed as follows:

1.Remove the fuse cover and fuse..

2.Fit a new fuse which should be a BS1362 13 Amp A..S..T..A.. or BSI approved type..

3.Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug..

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 13 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 13 Amp..

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere..

The wires in this mains lead are coloured in accordance with the following code:

Blue Neutral Brown Live Green and Yellow Earth

1.The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2.The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3.The Green and Yellow wire must be connected to the terminal which is marked with the letter “E” or coloured GREEN or

GREEN and YELLOW..

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires..

Do not attempt to bypass the safety purpose of the grounding type plug..

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS EASILY ACCESSIBLE.

Do not cover the ventilation slot on the LCD monitor.. Heat build-up can reduce the service life of your LCD monitor, and can also be dangerous..

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor.. Use a damp cloth for cleaning..

SERVICING

Servicing

Your monitor is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.

Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

nIf the power cord or plug is damaged..

nIf liquid has been spilt in to the LCD monitor..

n If the LCD monitor has been dropped or the cabinet has been damaged..

nIf the LCD monitor exhibits a distinct change in performance..

nIf the LCD monitor does not operate normally by following the operating instructions..

nIf the LCD monitor has been exposed to rain or water..

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage..

This will often require extensive work by a qualified technician to restore the monitor to normal operation.

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused..

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately..

In the European Union there are separate collection systems for used electrical and electronic products..

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to EU countries are not applied to other countries of the world..

GB	SERVICING GB

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules.. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense..

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian ICES-003..

WARNING

This is a Class A product.. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

GB	SERVICING GB

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you purchase it..

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA)..

GROUND

AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet.

Do not try to defeat this safety feature.. Should you be unable to insert the plug into the outlet, contact your electrician..

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

End-User License

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors.. Before using the product, please read the End-User License Conditions detailed below.. If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the

Productrepack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you agree to be bound by the terms and conditions of the End-User License..

License Grant, Conditions and restrictions

1.Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free license to use the Software upon and with the Product..

2.You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed to accept the terms and conditions of this license..

3.You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or removed..

4.The Software provided hereunder is copyrighted and licensed (not sold).. SANYO especially does not transfer title or and ownership rights in the Software to you.. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under license by a third party supplier..

5.Except as expressly permitted by statute you may not;

●use the Software in conjunction with any other computer hardware other than the product;

●copy all or part of the Software;

●incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;

●reverse-engineer, decompile or disassemble the Software;

●make the Software (or any part of it) available, or permit its redistribution, for use with any computer hardware other than the Product; or rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software..

Termination

This license is effective until terminated.. This license will terminate automatically without notice if you fail to comply with any of its provisions..

Disclaimer

1.The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the same are not capable of exclusion at law)..

2.In no circumstances will SANYO be liable for any direct, indirect, consequential, or incidental damage (including loss of profits, business interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use the Software (save to the extent that such liability is not capable of exclusion at law)..

General

1.This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be entitled to bring a claim in the courts of any jurisdiction..

2.This End-User License is governed by the laws of the State of California.. The End-User and Sanyo agree that any action to enforce or interpret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County, California.. The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court..

3.The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software..

GB SERVICING

Installation Notice

1. The LCD monitor can be installated by the following two ways:

	Screw holes for installing
Screws:	Screw holes for installing
Screws:
Spec	: M6 X 12MM (metric)
Material	: Stainless Steel

Note:

Don't install the TV set reversed as shown below :

2.The product should be mounted to wall only as recommended by the manufacturer..

3.The installation of the bracket must be done by a qualified professional.

●Installing the bracket by unqualified personnel may result in injury.

●Always use the mounting device specified by a qualified professional.

Note:

For use only with UL Listed Wall Mount Bracket.

+ 15 hidden pages