Ordering number:ENN2635
Monolithic Digital IC
LB9051
Switching Type Hall IC
Overview
The LB9051 is a Hall IC that is operated in the presence of an alternating magnetic field and produces a digital output. The LB9051 contains a silicon Hall generator, an amplifier, a Schmitt trigger circuit on chip and especially suited for detection of magnetism (ex. detection of the rotation of
a small magnet-used substance).
Applications
•Detection of magnetism.
•Contactless switch.
•Detection of the rotation, position of a magnetic substance.
Features
•Operated in the presence of an alternating magnetic field.
•Wide operating voltage range (3.6 to 16V).
•Output capable of direct driving a TTL, MOS IC.
•High sensitivity (sensitive to low magnetism).
Package Dimensions
unit:mm
3105-SIH
[LB9051]
0.5
0.45
1 2 3
1.31.3
4.5
|
|
2.0 |
|
4.0 |
2.0 |
0.8 |
1.8 |
|
|
|
0.4 |
|
15.0 |
|
1.0
SANYO : SIH
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter |
Symbol |
Conditions |
Ratings |
Unit |
|
|
|
|
|
Maximum supply voltage |
VCC max |
|
18 |
V |
Maximum supply current |
ICC max |
|
8 |
mA |
Maximum output current |
IO max |
|
20 |
mA |
Allowable power dissipation |
Pd max |
Ta=80˚C |
100 |
mW |
|
|
|
|
|
Operating temperature |
Topr |
|
–40 to +85 |
˚C |
|
|
|
|
|
Storage temperature |
Tstg |
|
–55 to +125 |
˚C |
Electrical Characteristics at Ta = 25˚C
Parameter |
Symbol |
Conditions |
|
Ratings |
|
Unit |
|
|
|
||||
|
|
|
min |
typ |
max |
|
|
|
|
|
|
|
|
Release point |
BLH |
VCC=12V, VO : L → H |
–300 |
|
|
Gauss |
Operate point |
BHL |
VCC=12V, VO : H → L |
|
|
300 |
Gauss |
Output low-level voltage |
VOL1 |
VCC=16V, IO=12mA, B=300Gauss |
|
|
0.4 |
V |
VOL2 |
VCC=3.6V, IO=12mA, B=300Gauss |
|
|
0.4 |
V |
|
|
|
|
||||
Output high-level voltage |
VOH1 |
VCC=16V, IO=–30µA, B=–300Gauss |
14.6 |
|
|
V |
VOH2 |
VCC=3.6V, IO=–30µA, B=–300Gauss |
2.2 |
|
|
V |
|
|
|
|
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22801TN (KT)/8047TA, TS No.2635–1/3
LB9051
Continued from preceding page.
Parameter |
Symbol |
Conditions |
|
Ratings |
|
Unit |
|
|
|
||||
|
|
|
min |
typ |
max |
|
|
|
|
|
|
|
|
Output short current |
–IOS |
VCC=16V, VO=0V, B=–300Gauss |
0.4 |
|
0.9 |
mA |
Supply current |
ICC1 |
VCC=16V |
|
|
6 |
mA |
ICC2 |
VCC=3.6V |
|
|
5.5 |
mA |
|
|
|
|
Pin Assignment and Block Diagram
Location of the Hall Generator and Cross-sectional View of the Hall IC
The Hall generator is located in the dashed area.
Magnetic Flux to Electric Voltage Transduce Characteristic
No.2635–2/3