Page 1
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Monolithic Digital IC
8mm VCR Sensor Amplifier
Ordering number:ENN4184
LB8111V
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, T aito-ku, TOKYO, 110-8534 JAPAN
Overview
The LB8111V is equipped with built-in amplifiers for use
with reel FG, drum FG and drum PG applications to make
this IC most suitable for portable VCR (Video Cassette Re-
corder) applications.
Features
• Built-in 2-channel reed FG amplifier.
• Built-in drum FG amplifier.
• Built-in drum PG amplifier.
Package Dimensions
unit:mm
3175B-SSOP24
[LB8111V]
7.8
24
1
(0.33)
0.65
0.22
5.6
0.15
(1.3)
1.5max
0.1
SANYO : SSOP24
7.6
0.5
Specifications
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppusmumixaMV
noitapissidrewopelbawollAxamdP 3.0W
erutarepmetgnitarepOrpoT 57+ot02–
erutarepmetegarotSgtsT 521+ot55–
Allowable Operating Ranges at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppuSV
xam 7V
CC
CC
22801TN (KT)/42093TS A8-8956 No.4184–1/6
˚C
˚C
5.5ot0.4V
Page 2
Electrical Characteristics at Ta = 25˚C, VCC=5V
retemaraPlobmySsnoitidnoC
tnerrucylppuSI
egatlovecnereferlanretnIV
]reifilpmaGFleeR[
egatlovtesffotupnIV
tnerrucsaibtupnII
egnaregatlovtupniesahp-nIV
oitarecnaraelclangisesahp-nIRMC* 5608Bd
niagpool-nepOG
egatlovnoitarutastuptuoedisecruoSV
egatlovnoitarutastuptuoediskniSV
]reifilpmaGFmurD[
egatlovtesffotupnIV
tnerrucsaibtupnII
egnaregatlovtupniesahp-nIV
)knis(tnerructuptuOI
egatlovNOtuptuOV
egatlovFFOtuptuOV
htdiwsiseretsyHV
]reifilpmaGPmurD[
egatlovtesffotupnIV
tnerrucsaibtupnII
egnaregatlovtupniesahp-nIV
)knis(tnerructuptuOI
egatlovNOtuptuOV
egatlovFFOtuptuOV
htdiwsiseretsyhreifilpmattimhcSV
Note : * marks indicate items that were not subject to testing.
CC
FER
OI
B
MCI
V
I
UO
O
I
DO
O
*1±5±Vm
OI
* 052An
B
*14V
MCI
LO
LO
HO
*07001031Vm
SIH
OI
* 005An
B
*14V
MCI
LO
LO
HO
*02Vm
SIHS
LB8111V
sgnitaR
nimpytxam
35Am
8.10.22.2V
1±5±Vm
14V
55Bd
Aµ005–=7.3V
Aµ005= 3.1V
2.04.0V
8.4V
1±5±Vm
2.04.0V
8.4V
tinU
052An
2Am
2Am
Pin Assignment
No.4184–2/6
Page 3
Block Diagram
LB8111V
No.4184–3/6
Page 4
LB8111V
Pin Function Unit (resistance : Ω)
.oNniPlobmySniPegatloVniPtiucriCtnelaviuqEnoitpircseDniP
reifilpmaleerylppusrewoP
42V
31DNG .)DNG(dnuorgtiucriclatotrofsinipsihT
5ferV .)V2–(egatlovecnereferlanretnirofsinipsihT
81
91
CC
R
2GFLni+
EE
R
1GFLni+
EE
.ylppusrewoptiucriclatotrofsinipsihT
murDdnaGFmurDrofegatlovecnerefersiegatlovsihT
.sreifilpmaGP
GFleerehtrofstupni)+(evitisoproferasnipesehT
.sreifilpma
51
22
71
02
61
12
41
32
4–niGPMURD otlangisGPstupnI.tupnireifilpmaGPmurDrofsinipsihT
R
2GFLni–
EE
R
1GFLni–
EE
R
2GFL
EE
R
EE
R
EE
R
EE
R
R
reifilpmaGPmurD
1–
ni
1GFL
1–
ni
2GFL
2–
ni
1GFL
2–
ni
2GFL
EE
tuo
1GFL
EE
tuo
.sreifilpma
.srotsisertupnik2htiwdeppiuqe
k08htiwdeppiuqe Ω .srotsiserkcab-deef
Vhtiwlavretni
.
FER
GFleerehtrofstupni)–(evitagenroferasnipesehT
stupni)–(evitagenreifilpmaGFleerroferasnipesehT
stupni)–(evitagenreifilpmaGFleerroferasnipesehT
.sniptuptuoreifilpmaGFleerroferasnipesehT
Continued on next page.
No.4184–4/6
Page 5
LB8111V
Continued form preceding page. Unit (resistance : Ω)
.oNniPlobmySniPegatloVniPtiucriCtnelaviuqEnoitpircseDniP
3P.CGPMURD .tuptuoreifilpmaegats-tsrifreifilpmaGPmurDrofsinipsihT
).desutonsinipsiht,snoitacilppalautca
htiW(.tnemerusaemreifilpmaGProfnipkcehcehtsisihT
2+niGPMURD dlohkaepreifilpmaGPmurDagnitcennocrofsinipsihT
1GPMURD
reifilpmaGFmurD
6niGFMURD
7niGFMURD
TUO
2+
1+
.roticapac
.niptuptuoreifilpmaGPmurDehtsinipsihT
deppiuqetupni)+(evitisopreifilpmaGFmurDrofsinipsihT
V
.
FER
.rotsisertupnik9ahtiw
htiwlavretniotlangisGFstupnI.rotsisertupnik1ahtiw
deppiuqetupni)+(evitisopreifilpmaGFmurDrofsinipsihT
8niGFMURD
01niGFMURD
9niGFMURD
+
1–
.rotsisertupnik9ahtiwdeppiuqe
–
.tupni)+(evitisopreifilpmaGFmurDrofsinipsihT
tupni)–(evitagenrefilpmaGFmurDrofsinipsihT
.tupni)–(evitagenrefilpmaGFmurDrofsinipsihT
Continued on next page.
No.4184–5/6
Page 6
LB8111V
Continued form preceding page. Unit (resistance : Ω)
.oNniPlobmySniPegatloVniPtiucriCtnelaviuqEnoitpircseDniP
11GFMURD
1TUO
.tuptuoreifilpmaegats-tsrifreifilpmaGFmurDrofsinipsihT
htiW(.tnemerusaemreifilpmaGFrofnipkcehcehtsisihT
).desutonsinipsiht,snoitacilppalautca
21GFMURD
2TUO
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
.niptuptuoreifilpmaGFmurDehtrofsinipsihT
This catalog provides information as of February, 2001. Specifications and information herein are subject
to change without notice.
PS No.4184–6/6
Loading...