Page 1
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Monolithic Digital IC
High-Voltage, High-Current, Darlington Driver
Ordering number:ENN3298
LB1730
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Functions and Features
• Four-channel independent high-voltage (85V), high-current (1.5A) Darlington driver.
• On-chip spark killer diode.
• Capable of being operated direct by 5V TTL.
• NPN input high-active type.
Specifications
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppusmumixaMV
egatlovtuptuodeilppAV
egatlovtupnideilppAV
tnerructuptuOI
tnerrucdrawrofedoidrellikkrapSI
noitapissidrewopelbawollAxamdP)W6.2:nrettapdraobtiucricdednemmocerhtiW( 9.1W
erutarepmetgnitarepOrpoT 57+ot02–
erutarepmetegarotSgtsT 051+ot55–
xam 58V
CC
TUO
NI
TUO
SF
Package Dimensions
unit:mm
3054B-DIP16F
[LB1730]
19.0
16
(0.61)
1
1.3
1.65
2.54
0.5
1.25
9
6.45
7.62
0.4
8
(3.46)
4.26max
3.5
0.51min
SANYO : DIP16F
58V
51V
5.1A
5.1A
˚C
˚C
Allowable Operating Ranges at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovtuptuodeilppAV
egatlovlevel-NOtupnIV
egatlovlevel-FFOtupnIV
TUO
noI
NI
ffoI
NI
A0.1= 51ot0.2V
TUO
≤ Aµ033.0+ot3.0–V
TUO
22801TN (KT)/6190TA No.3298–1/3
58V
Page 2
Electrical Characteristics at Ta = 25˚C
retemaraPlobmySsnoitidnoC
Vo1tasVNII,V0.5=
egatlovnoitarutastuptuO
egatlovniatsustuptuOV
tnerructupnII
egatlovdrawrofedoidrellikkrapSV
tnerrucesreveredoidrellikkrapSI
Vo2tasVNII,V0.5=
Vo3tasVNII,V0.5=
susI
o
NI
SF
SR
LB1730
sgnitaR
nimpytxam
A5.0=2.1V
TUO
A0.1=5.1V
TUO
A5.1=0.2V
TUO
Am001=58V
TUO
V
V0.5=1151Am
NI
I
A5.1= 0.3V
SF
V
V,V58=
CC
V0=03Aµ
TUO
Pin Assingnment
tinU
Equivalent Circuit
Sample Printed Pattern Circuit
Note) · VCC (pins 1 and 8) are shorted internally.
· Do not use NC pin.
No.3298–2/3
Page 3
LB1730
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2001. Specifications and information herein are subject
to change without notice.
PS No.3298–3/3
Loading...