Sanyo LB1276 Specifications

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
Monolithic Digital IC
High-Sensitivity LED Driver Array
Ordering number:ENN992C
LB1276
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Overview
The LB1276 is an LED driver array. By connecting this IC to LSI output pins whose output current capacity is small, LEDs can be lighted. It features high sensitivity (IIN=80µA max.) and I
=30mA driving capacity and is ideally suited
OUT
for driving LED indicators for use in commercial and in­dustrial equipment.
Specifications
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppustuptuOV
tnerructuptuOI
egatlovylppustupnIV
tnerructuo-wolf8niPI
noitapissidrewopelbawollAxamdP 077Wm
erutarepmetgnitarepOrpoT 08+ot02–
erutarepmetegarotSgtsT 521+ot04–
TUO
TUO
NI
8
tinureP 03Am
Package Dimensions
unit:mm
3006C-DIP16
[LB1276]
19.0
16
1
3.65max
3.4
(0.61)
1.09
(3.0)
0.51min
2.54
1.2
0.48
9
6.4
8
7.62
0.25
SANYO : DIP16
0.81+ot3.0–V
0.81+ot3.0–V 012–Am
˚C ˚C
Allowable Operating Ranges at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovdeilppatuptuOV
egatlovlevel-hgihtupnIV
egatlovlevel-woltupnIV
TUO
I
HI
I
LI
Am03= 0.81ot5.3V
TUO
Aµ01< 3.0+ot3.0–V
TUO
Electrical Characteristics at Ta = 25˚C
retemaraPlobmySsnoitidnoC
egatlovtuptuOV
egatlovniatsustuptuOV
tnerrucegakaeltuptuOI
tnerructupnII
V
TUO
)s(TUO
ffo
NI
I,V5=
NI
V
NI
V
NI
VNIV5= 08Aµ
Am03=2.1V
TUO
V,V3.0=
V81=01Aµ
TUO
I,sµ01<emitdeilppa,nepo:
Am03=81V
TUO
22801TN (KT)/O3095YK/7097KI/4085KI/7133KI, TS No.992–1/2
sgnitaR
nimpytxam
81otpuV
tinU
Equivalent Circuit and Block Diagram
LB1276
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 2001. Specifications and information herein are subject to change without notice.
PS No.992–2/2
Loading...