![](/html/cc/cc89/cc896dfad5b8041dc4a1c475e68318e69566c55256183fc233cea8832c74c799/bg1.png)
Ordering number: EN 4089
Monolithic Linear IC
LA6511
Power Operational Amplifier
Overview
The LA6511 is a BLT-dedicated 1-channel driver developed for
use in consumer and industrial equipment. (Do not use with ±
Package Dimensions
unit : mm
3024A-SIP10H
power supply)
[LA6511]
27.0
20.0
Features and Functions
.
High output current (IOmax = 2.0 A)
.
High gain
.
Wide operating voltage range (4 to 24 V)
.
Includes mute circuit (active low)
8.4
7.0
1.4
2.54
0.5
R1.7
11.8
1.0min
101
2.07
SANYO : SIP10H
Specifications
Maximum Ratings atTa=25°C
Parameter Symbol Ratings Unit
Maximum supply voltage V
Differential input voltage V
Input common-mode voltage range V
Allowable power dissipation Pd max 3.1 W
Operating temperature Topr –20 to +75
Storage temperature Tstg –55 to +150
max 24 V
CC
ID
IN
24 V
24 V
13.2max
6.0
4.0
0.4
2.0
C
°
C
°
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51695HA(II) No.4089-1/4
![](/html/cc/cc89/cc896dfad5b8041dc4a1c475e68318e69566c55256183fc233cea8832c74c799/bg2.png)
LA6511
Operating Characteristics atTa=25°C, VCC= 12V
Parameter Symbol
Current drain with no load I
Input offset voltage V
Input offset voltage difference DV
Input offset current I
Input bias current I
Input common-mode voltage range V
Common-mode signal rejection ratio CMR 70 80 dB
Maximum output voltage V
Voltage gain VG
Slew rate SR 0.15 V/µs
Supply voltage rejection ratio SVR 30 µV/V
Mute-off voltage V
Mute pin output current I
Notes)
.
Thermal shutdown function on chip.
.
The mute voltage operates versus the VMref voltage.
With infinitely large heat sink
Al heat sink
Tightening torque:
4kg
Coated with
silicone grease
.
CC
IO
IO
IO
B
ICM
O
O
MOFF
MUTE
cm
Conditions
RS% 10 kΩ 37mV
RS% 10 kΩ 13mV
RL= 8.0 Ω 8V
C/W
°
-
f
min typ max Unit
17 25 35 mA
10 100 nA
50 500 nA
0.5 10 V
85 dB
1.0 V
40 µA
Al heat sink
t = 1.5 mm
Tightening torque: 4 kg
Coated with silicone grease
.
cm
No heat sink
Allowable power dissipation,Pd max - W
Storage temperature, Ta -°C
Thermal resistance of heat sink, θ
Area of heat sink, S
-cm
f
2
No.4089-2/4