Sanyo HIT POWER 190 User Manual

HIT Photovoltaic Module

Module Efficiency: 16.4%

Cell Efficiency: 18.8%

Power Output: 190 Watts

High Efficiency

HIT® Power solar panels are leaders in sunlight conversion efficiency. Obtain maximum power within a fixed amount of space. Save money using fewer system attachments and racking materials, and reduce costs by spending less time installing per watt.

SANYO HIT® Solar Cell Structure

p-type/i -type (Ultra-thin amorphous silicon layer)

Front- side electrode

Rear-side electrode

i-type/n-type (Ultra-thin amorphous silicon layer)

Thin mono crystalline silicon wafer

Unnecessary Section When Using SANYO

Power Guarantee

SANYO’s power ratings for HIT Power panels guarantee customers receive 100% of the nameplate rated power (or more) at the time of purchase, enabling owners to generate more kWh per rated watt, quicken investment returns, and help realize complete customer satisfaction.

Temperature Performance

As temperatures rise, HIT Power solar panels produce 10% or more electricity (kWh) than conventional crystalline silicon solar panels at the same temperature.

Proprietary Technology

HIT solar cells are hybrids of single crystalline silicon surrounded by ultra-thin amorphous silicon layers, and are available solely from SANYO. HIT Power models are ideal for grid-connected solar systems, areas with performance based incentives, and renewable energy credits.

Structural Strength

HIT Power panels have a double-wall black anodized aluminum frame for extra strength, and are tested to 60PSF. The panels come pre-equipped with a touchsafe junction box, USE-2 outdoor rated cables, MC4™ locking connectors, and are UL 1703 safety rated for wind, hail, and fire.

Valuable Features

HIT Power solar panels operate silently, have no moving parts and are among the lightest per watt in the industry. Unique eco-packaging minimizes cardboard waste at the job site. The packing density of the panels reduces transportation, fuel, and storage costs per installed watt.

Increased Performance with SANYO

0.8

0.5

Approx.

10% Up

Module Temp.75°C

HIT

c-Si

Quality Products

SANYO silicon wafers located inside HIT solar panels are made in California USA, and the panels are assembled in an ISO 9001 (quality), 14001 (environment), and 18001 (safety) certified factory. The panels have a Limited 20-Year Power Output and 5-Year Product Workmanship Warranty.

Kobe (Japan), July 24, 2007,

Normalized Output Power

5 am 7 am 9 am 11 am 1pm 3 pm 5 pm 7 pm

Faced due South, Tilt angle 30°

Time

Electrical Specifications

Model

Rated Power (Pmax)

HIT Power 190 or HIP-190BA19

Maximum Power Voltage (Vpm)

Maximum Power Current (Ipm)

Open Circuit Voltage (Voc)

Short Circuit Current (Isc)

Temperature Coefficient (Pmax)

Temperature Coefficient (Voc)

Temperature Coefficient (Isc)

CEC PTC Rating

Cell Efficiency

Module Efficiency

Watts per Ft.

Maximum System Voltage

Series Fuse Rating

Warranted Tolerance (-/+)

Mechanical Specifications

Internal Bypass Diodes

Module Area

Weight

Dimensions LxWxH

51.9x34.6x1.8 in. (1319x880x46mm)

Cable Length -Male/+Female

Cable Size / Connector Type

Static Wind / Snow Load

Pallet Dimensions LxWxH

No.12 AWG / MC4™ Locking Connectors

60PSF (2880Pa) / 39PSF (1867Pa)

53x35x77 in. (1346x897x1952mm)

Quantity per Pallet / Pallet Weight

Quantity per 20', 40', and 53' Container

340 pcs., 714 pcs., 918 pcs.

Operating Conditions & Safety Ratings

Ambient Operating Temperature

NOCT

Hail Safety Impact Velocity

Fire Safety Classification

Safety & Rating Certifications

Limited Warranty

STC: Cell Temp. 25oC, AM1.5, 1000W/m

Note: Specifications and information above may change without notice.

2 2

Monthly average low and high of the installation site.

-4°F to 115°F (-20°C to 46°C)

1" hailstone (25mm) at 52 mph (23m/s)

5 Years Workmanship, 20 Years Power Output

190 W

54.8 V

3.47 A

67.5 V

3.75 A

-0.348% / °C

-0.187 V / °C

1.96 mA / °C

176.4 W

18.8%

16.4%

15.2 W

600 V

15 A

-0% / +10%

4 Bypass Diodes

12.49 Ft.

(1.16m2)

33.07 Lbs. (15kg)

30.7/24.8 in. (780/630mm)

34 pcs. / 1166 Lbs. (530kg)

113°F (45°C)

Class C

UL 1703, cUL, CEC

190

Dependence on Temperature

4.00

3.50

3.00

2.50

2.00

Current (A)Current (A)

1.50

1.00

0.50

0.00 0 10 20 30 40 50 60 70 80

Voltage (V)

Dependence on Irradiance

4.00

3.50

3.00

2.50

2.00

1.50

1.00

0.50

0.00

1000W/m

800W/m

600W/m

400W/m

200W/m

0 10 20 30 40 50 60 70 80

Voltage (V)

75°C

50°C

25°C

0°C

Dimensions Unit: inches (mm)

34.6 (880)

Front Side Back

1.8 (46)

51.9 (1319)

13 (330)

17.3 (440)

0.205 (5.2)

0.276 (7)

4x mounting holes

0.276 (7)

Ground (4 places)

0.165 (4.2)

0.276 (7)

0.205 (5.2)

Read the

1.8 (46)

0.5 (13)

CAUTION!

operating instructions carefully

before use of these products

1.5 (37)

Section A-A’

SANYO Energy (U.S.A.) Corp.

A Division of SANYO North America Corporation

550 S. Winchester Blvd., Suite 510 San Jose, CA 95128, U.S.A.

www.sanyo.com/solar solar@sec.sanyo.com