Sanyo HIP-200NKHB5, HIP-205NKHB5 User Manual
HIT photovoltaic module
HIP-205NKHB5
HIP-200NKHB5
The SANYO HIT (Heterojunction with Intrinsic Thin layer ) solar cell is made of a thin mono
crystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides
the industry's leading performance and value using state-of-the-art manufacturing techniques.
Benefit in Terms of Performance
The HIT cell and module have very high
conversion efficiency in mass production.
Model Cell Efficiency Module Efficiency
HIT Solar Cell Structure
Ultra-thin amorphous silicon layer
Front-side
electrode
Rear-side
electrode
Ultra-thin amorphous silicon layer
Development of HIT solar cell was supported in part
by the New Energy and Industrial Technology
Development Organization (NEDO).
n
Thin mono
crystalline
silicon wafer
HIP-205NKHB5
HIP-200NKHB5
High performance at high temperatures
18.4%
18.0%
16.0%
15.6%
Even at high temperatures, the HIT solar cell can
maintain higher efficiency than a conventional
crystalline silicon solar cell.
[Changes in generated power daytime]
0.8
0.5
normalized output power
approx.
10%up
Kobe (Japan), 24. July 2007,
faced to south, tilt angle 30°
5 7 9 1113151719
Module temp.75℃
HIT
c-Si
time
Environmentally-Friendly Solar Cell
More Clean Energy
HIT can generate more clean Energy than other
conventional crystalline solar cells.
Special Features
SANYO HIT solar modules are 100% emission
free, have no moving parts and produce no
noise.The dimensions of the HIT modules
allow space-saving installation and
achievement of maximum output power
possible on given roof area.
Photovoltaic Module
NKH205/200
Electrical and Mechanical Characteristics
HIP-205NKHB5,HIP-200NKHB5
Models HIP-xxxNKHB5
Electrical data
Maximum power (Pmax
)
Max. power voltage (Vmp)
Max. power current (Imp)
Open circuit voltage (Voc)
Short circuit current (Isc)
Warranted minimum power (Pmin)
Maximum over current rating
Output power tolerance
Maximum system voltage
Temperature coefficient of Pmax
Voc
lsc
Note 1: Standard Test Conditions: Air mass 1.5, Irradiance = 1000W/m2,
Cell temperature = 25°C
Note 2: The values in the above table are nominal
[W]
[V]
[A]
[V]
[A]
[W]
[A]
[%]
[V]
[%/°C]
[V/°C]
[mA/°C]
205
40.7
5.05
50.3
5.54
194.75
-0.30
-0.126
1.66
Dimensions and weight
812
B
B
35
LABEL
ＣＯＮＮＥＣＴＯＲ
+10/-5
(1020)
(＋)positivenegative(−)
15
600
JUNCTION
BOX
200205
200
40.0
5.00
49.6
5.50
190.0
-0.33
-0.125
1.65
unit: mm
Reference data for model HIP-205NKHB5
Dependence on irradiance
6.00
5.00
4.00
3.00
Current[A]
2.00
1.00
0.00
100 2030405060
1000W/m
800W/m
600W/m
400W/m
200W/m
2
2
2
2
2
Voltage[V]
Dependence on temperature
6.00
5.00
4.00
3.00
2.00
Current[A]
1.00
0.00
100 2030405060
Voltage[V]
Cell temperature: 25oC
AM-1.5, 1000W/m
75℃
50℃
25℃
0℃
2
1580
Certificates
Please consult your local dealer for more information.
AA
Front
35
(7)
(12) (7)
Section A-A Section B-B
12
Warranty
Power output: 20 years (80% of minimum output power)
Product workmanship: 2 years
(Based on contract terms)
CAUTION!
Please read the operating instructions carefully before using the products.
Backsideside
35
Weight: 15kg
Certificate Number: PV05-53203-1012
An above number is a certification number by JET.
JET: Japan Electrical Safety & Environment Technology Laboratories
Due to our policy of continual improvement the products covered by this brochure may be changed without notice.
[ASIA & Oceania]
International Sales & Marketing H.Q.
Tel.81-6-6994-7359 Fax.81-6-6994-7083
Solar Division
http://www.sanyo.com/solar
email: homepage_solar@sanyo.com
12/08
Loading...