![](/html/c9/c984/c98435372a985a3890ca141e2302c46a1f4bd4cdc7146c550d057b9acaad837b/bg1.png)
HIT Photovoltaic Module
Module Efficiency: 16.4%
Cell Efficiency: 18.8%
Power Output: 190 Watts
High Efficiency
HIT® Power solar panels are leaders in sunlight conversion efficiency. Obtain
maximum power within a fixed amount of space. Save money using fewer system
attachments and racking materials, and reduce costs by spending less time installing per watt.
SANYO HIT® Solar Cell Structure
p-type/i -type
(Ultra-thin amorphous silicon layer)
Front- side
electrode
Rear-side
electrode
n
i-type/n-type
(Ultra-thin amorphous silicon layer)
Thin mono
crystalline
silicon wafer
Unnecessary Section When Using SANYO
Power Guarantee
SANYO’s power ratings for HIT Power panels guarantee customers receive 100%
of the nameplate rated power (or more) at the time of purchase, enabling owners
to generate more kWh per rated watt, quicken investment returns, and help realize
complete customer satisfaction.
Temperature Performance
As temperatures rise, HIT Power solar panels produce 10% or more electricity
(kWh) than conventional crystalline silicon solar panels at the same temperature.
Proprietary Technology
HIT solar cells are hybrids of single crystalline silicon surrounded by ultra-thin
amorphous silicon layers, and are available solely from SANYO. HIT Power models
are ideal for grid-connected solar systems, areas with performance based incentives, and renewable energy credits.
Structural Strength
HIT Power panels have a double-wall black anodized aluminum frame for extra
strength, and are tested to 60PSF. The panels come pre-equipped with a touchsafe junction box, USE-2 outdoor rated cables, MC4™ locking connectors, and
are UL 1703 safety rated for wind, hail, and fire.
Valuable Features
HIT Power solar panels operate silently, have no moving parts and are among the
lightest per watt in the industry. Unique eco-packaging minimizes cardboard waste
at the job site. The packing density of the panels reduces transportation, fuel, and
storage costs per installed watt.
Increased Performance with SANYO
0.8
0.5
Approx.
10% Up
Module Temp.75°C
HIT
c-Si
Quality Products
SANYO silicon wafers located inside HIT solar panels are made in California USA,
and the panels are assembled in an ISO 9001 (quality), 14001 (environment), and
18001 (safety) certified factory. The panels have a Limited 20-Year Power Output
and 5-Year Product Workmanship Warranty.
Kobe (Japan), July 24, 2007,
Normalized Output Power
5 am 7 am 9 am 11 am 1pm 3 pm 5 pm 7 pm
Faced due South, Tilt angle 30°
Time
![](/html/c9/c984/c98435372a985a3890ca141e2302c46a1f4bd4cdc7146c550d057b9acaad837b/bg2.png)
Electrical Specifications
Model
Rated Power (Pmax)
1
HIT Power 190 or HIP-190BA19
Maximum Power Voltage (Vpm)
Maximum Power Current (Ipm)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Temperature Coefficient (Pmax)
Temperature Coefficient (Voc)
Temperature Coefficient (Isc)
CEC PTC Rating
Cell Efficiency
Module Efficiency
Watts per Ft.
2
Maximum System Voltage
Series Fuse Rating
Warranted Tolerance (-/+)
Mechanical Specifications
Internal Bypass Diodes
Module Area
Weight
Dimensions LxWxH
51.9x34.6x1.8 in. (1319x880x46mm)
Cable Length -Male/+Female
Cable Size / Connector Type
Static Wind / Snow Load
Pallet Dimensions LxWxH
No.12 AWG / MC4™ Locking Connectors
60PSF (2880Pa) / 39PSF (1867Pa)
53x35x77 in. (1346x897x1952mm)
Quantity per Pallet / Pallet Weight
Quantity per 20', 40', and 53' Container
340 pcs., 714 pcs., 918 pcs.
Operating Conditions & Safety Ratings
Ambient Operating Temperature
NOCT
Hail Safety Impact Velocity
Fire Safety Classification
Safety & Rating Certifications
Limited Warranty
1
STC: Cell Temp. 25oC, AM1.5, 1000W/m
Note: Specifications and information above may change without notice.
2 2
Monthly average low and high of the installation site.
-4°F to 115°F (-20°C to 46°C)
1" hailstone (25mm) at 52 mph (23m/s)
5 Years Workmanship, 20 Years Power Output
190 W
54.8 V
3.47 A
67.5 V
3.75 A
-0.348% / °C
-0.187 V / °C
1.96 mA / °C
176.4 W
18.8%
16.4%
15.2 W
600 V
15 A
-0% / +10%
4 Bypass Diodes
2
12.49 Ft.
(1.16m2)
33.07 Lbs. (15kg)
30.7/24.8 in. (780/630mm)
34 pcs. / 1166 Lbs. (530kg)
113°F (45°C)
Class C
UL 1703, cUL, CEC
190
Dependence on Temperature
4.00
3.50
3.00
2.50
2.00
Current (A)Current (A)
1.50
1.00
0.50
0.00
0 10 20 30 40 50 60 70 80
Voltage (V)
Dependence on Irradiance
4.00
3.50
3.00
2.50
2.00
2
1.50
1.00
0.50
0.00
2
1000W/m
2
800W/m
2
600W/m
2
400W/m
2
200W/m
0 10 20 30 40 50 60 70 80
Voltage (V)
1
75°C
50°C
25°C
0°C
1
Dimensions Unit: inches (mm)
34.6 (880)
Front Side Back
1.8 (46)
51.9 (1319)
13 (330)
17.3 (440)
0.205 (5.2)
0.276 (7)
4x mounting holes
0.276 (7)
Ground (4 places)
0.165 (4.2)
0.165 (4.2)
0.276 (7)
0.276 (7)
0.205 (5.2)
Read the
1.8 (46)
0.5 (13)
CAUTION!
operating instructions carefully
before use of these products
1.5 (37)
Section A-A’
SANYO Energy (U.S.A.) Corp.
A Division of SANYO North America Corporation
550 S. Winchester Blvd., Suite 510
San Jose, CA 95128, U.S.A.
www.sanyo.com/solar
solar@sec.sanyo.com
© SANYO Energy (U.S.A.) Corp. All Rights Reserved. 9/1/2009