Page 1
Ordering number : ENN7225
CPH6122
PNP Epitaxial Planar Silicon Transistor
CPH6122
DC / DC Converter Applications
Applications
•
Relay drivers, lamp drivers, motor drivers, strobes.
Package Dimensions
unit : mm
2146A
Features
•
Adoption of MBIT process.
•
High current capacitance.
•
Low collector-to-emitter saturation voltage.
•
High-speed switching.
•
Ultrasmall package facilitates miniaturization in end
products (mounting height : 0.9mm).
•
High allowable power dissipation.
6
1
23
2.9
5
0.95
[CPH6122]
4
0.4
0.7 0.2
1.6 0.60.6
0.9
2.8
0.15
0.05
1 : Collector
2 : Collector
3 : Base
4 : Emitter
5 : Collector
6 : Collector
0.2
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage V
Collector-to-Emitter Voltage V
Emitter-to-Bass Voltage V
Collector Current I
Collector Current (Pulse) I
Bass Current I
Collector Dissipation P
Junction T emperature T
Storage T emperature T stg --55 to +150 °C
CBO
CEO
EBO
C
CP
B
C
J
Mounted on ceramic board (600mm2×0.8mm) 1.3 W
SANYO : CPH6
--30 V
--30 V
--5 V
--3 A
--5 A
--600 mA
150 °C
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions
Collector Cutoff Current I
Emitter Cutoff Current I
DC Current Gain h
Gain-Bandwidth Product f
Output Capacitance Cob VCB=--10V, f=1MHz 25 pF
Collector-to-Emitter Saturation Voltage
CBO
EBO
FE
VCE(sat) IC=--1.5A, IB=--30mA --180 --270 mV
VCE(sat) IC=--1.5A, IB=--75mA --120 --180 mV
VCB=--30V, IE=0 --0.1 µA
VEB=--4V, IC=0 --0.1 µA
VCE=--2V, IC=--500mA 200 560
VCE=--10V, IC=--500mA 400 MHz
T
Marking : AW Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Ratings
min typ max
Unit
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
72602 TS IM TA-100026
No.7225-1/4
Page 2
CPH6122
Continued from preceding page.
Parameter Symbol Conditions
Base-to-Emitter Saturation Voltage VBE(sat) IC=--1.5A, IB=--30mA --0.83 --1.2 V
Collector-to-Base Breakdown Voltage V
Collector-to-Emitter Breakdown Voltage V
Emitter-to-Bass Breakdown Voltage V
Turn-On Time t
Storage Time t
Fall Time t
(BR)CBOIC
(BR)CEOIC
(BR)EBOIE
on
stg
f
=--10µA, IE=0 --30 V
=--1mA, RBE=∞ --30 V
=--10µA, IC=0 --5 V
See specified Test Circuit. 50 ns
See specified Test Circuit. 270 ns
See specified Test Circuit. 27 ns
Switching Time Test Circuit
I
PW=20µs
D.C.≤1%
INPUT
V
50Ω
--20IB1=20IB2=IC= --500mA
B1
I
B2
R
R
B
++
100µF 470µF
OUTPUT
24Ω
VCC= --12VVBE=5V
Ratings
min typ max
Unit
--2.0
--1.8
--1.6
-- A
--1.4
C
--1.2
--1.0
--0.8
--0.6
Collector Current, I
--0.4
--0.2
--40mA
--50mA
0
0
--0.2
Collector-to-Emitter Voltage, V
1000
7
5
3
FE
2
100
7
5
DC Current Gain, h
3
2
10
23 57 23 57
--0.01
I
-- V
C
CE
--20mA
--30mA
--0.4 --0.6 --0.8 --1.0--0.1 --0.3 --0.5 --0.7 --0.9
hFE -- I
C
Ta=75°C
25°C
--25°C
--0.1 --1.0
Collector Current, I
C
-- A
--10mA
--8mA
--6mA
--4mA
--2mA
-- V
CE
VCE= --2V
23 57
I
B
=0
IT04554
IT04556
--10
I
-- V
-- A
C
--3.0
--2.5
--2.0
--1.5
--1.0
C
VCE= --2V
BE
25°C
Ta=75°C
Collector Current, I
--0.5
0
0 --0.2 --0.4 --0.6 --0.8 --1.0
Bass-to-Emitter V oltage, V
5
3
-- MHz
T
2
100
Gain-Bandwidth Product, F
7
23 57 23 5 23 57
--0.01
Collector Current, I
f
-- I
T
C
--0.1 --1.0
C
BE
-- A
-- V
VCE= --10V
--25°C
IT04555
IT04557
No.7225-2/4
Page 3
100
7
-- pF
5
3
2
Output Capacitance, Cob
Cob -- V
CB
CPH6122
f=1MHz
--1000
7
5
-- mV
3
2
(sat)
CE
--100
7
5
3
2
Collector-to-Emitter
Saturation V oltage, V
VCB(sat) -- I
25°C
C
IC / IB=20
Ta=75°C
--25°C
10
--
1.0
3
IC / IB=50
2
--1000
-- mV
7
5
(sat)
3
CE
2
--100
7
5
3
Collector-to-Emitter
Saturation V oltage, V
2
--10
--10
7
ICP= --5A
5
IC= --3A
3
2
-- A
--1.0
C
7
5
3
2
--0.1
7
5
Collector Current, I
3
Tc=25°C
2
Single pulse
Mounted on a ceramic board(600mm
--0.01
--0.1
23 57 23
Collector-to-Base Voltage, V
VCE(sat) -- I
C
--
10
CB
-- V
25°C
Ta=75°C
--25°C
23 57 23 57
--0.1--0.01
Collector Current, I
C
--1.0
-- A
23 57
A S O
<50µs
100
1ms
10ms
100ms
DC operation
3
257 3
--
1.0
232557
Collector-to-Emitter Voltage, V
2
✕0.8mm)
--
10
-- V
CE
µ
500µs
s
IT04558
IT04560
IT04562
--10
--10
-- V
23 57 7
--0.01
Collector Current, I
2
23 5 23 57
--0.1
VBE(sat) -- I
C
-- A
C
(sat)
BE
--1.0
°C
Ta= --25
25°C
7
Base-to-Emitter
Saturation V oltage, V
5
23 57 7
1.4
1.3
1.2
-- W
1.0
C
0.8
0.6
0.4
Collector Dissipation, P
0.2
0
0 20 40 60 80 100 120 140 160
75°C
23 5 23 57
--0.1--0.01
Collector Current, I
C
-- A
PC -- Ta
Mounted on a ceramic board(600mm
Ambient Temperature, Ta -- °C
--1.0
--1.0
IC / IB=50
2
✕0.8mm)
IT04559
IT04561
IT04563
No.7225-3/4
Page 4
CPH6122
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2002. Specifications and information herein are subject
to change without notice.
No.7225-4/4
PS
Loading...