Page 1
Ordering number : ENN7220
CPH3122 / CPH3222
PNP / NPN Epitaxial Planar Silicon Transistors
CPH3122 / CPH3222
DC / DC Converter Applications
Applications
•
Relay drivers, lamp drivers, motor drivers, strobe.
Package Dimensions
unit : mm
2150A
Features
•
Adoption of MBIT process.
•
High current capacitance.
•
Low collector-to-emitter saturation voltage.
•
High-speed switching.
•
Ultrasmall package facilitates miniaturization
in end products (mounting height : 0.9mm).
•
High allowable power dissipation.
1
[CPH3122 / CPH3222]
2.9
0.4
3
1.6 0.60.6
2
1.9
0.7 0.2
0.9
0.15
2.8
1 : Base
2 : Emitter
3 : Collector
SANYO : CPH3
0.2
0.05
Specifications ( ) : CPH3122
Absolute Maximum Ratings at T a=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage V
Collector-to-Emitter Voltage V
Emitter-to-Base Voltage V
Collector Current I
Collector Current (Pulse) I
Base Current I
Collector Dissipation P
Junction T emperature Tj 150 °C
Storage T emperature T stg --55 to +150 °C
CBO
CEO
EBO
C
CP
B
C
Mounted on a ceramic board (600mm2✕0.8mm) 0.9 W
(--30)40 V
(--)30 V
(--)5 V
(--)3 A
(--)5 A
(--)600 mA
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions
Collector Cutoff Current I
Emitter Cutoff Current I
DC Current Gain h
Gain-Bandwidth Product f
Output Capacitance Cob VCB=(--)10V , f=1MHz (25)20 pF
Marking : CPH3122 : AT, CPH3222 : CT Continued on next page.
CBO
EBO
FE
VCB=(--)30V , IE=0 (--)0.1 µA
VEB=(--)4V, IC=0 (--)0.1 µA
VCE=(--)2V, IC=(--)500mA 200 560
VCE=(--)10V , IC=(--)500mA (400)420 MHz
T
min typ max
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Ratings
Unit
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41002 TS IM TA-100028,100030
No.7220-1/5
Page 2
CPH3122 / CPH3222
Continued from preceding page.
Parameter Symbol Conditions
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)1.5A, IB=(--)30mA (--)0.83 (--)1.2 V
Collector-to-Base Breakdown Voltage V
Collector-to-Emitter Breakdown Voltage V
Emitter-to-Base Breakdown Voltage V
Turn-ON Time t
Storage Time t
Fall Time t
VCE(sat)1 IC=(--)1.5A, IB=(--)30mA
VCE(sat)2 IC=(--)1.5A, IB=(--)75mA
(BR)CBOIC
(BR)CEOIC
(BR)EBOIE
on
stg
f
=(--)10µA, IE=0 (--30)40 V
=(--)1mA, RBE=∞ (--)30 V
=(--)10µA, IC=0 (--)5 V
See specified Test Circuit. (50)30 ns
See specified Test Circuit. (270)300 ns
See specified Test Circuit. (27)25 ns
min typ max
Ratings
(--180)130 (--270)195
(--)120 (--)180
Switching Time Test Circuit
I
PW=20µs
D.C.≤1%
B1
I
B2
OUTPUT
Unit
mV
mV
INPUT
V
50Ω
R
IC=20IB1= --20IB2=500mA
For PNP, the polarity is reversed.
I
-- V
--30mA
C
--20mA
--2.0
CPH3122
--1.8
--1.6
--1.4
-- A
C
--1.2
--1.0
--0.8
--0.6
Collector Current, I
--0.4
--0.2
--40mA
--50mA
0
0 --0.2 --0.3--0.1 --0.4 --0.5 --0.6 --0.7
Collector-to-Emitter Voltage, V
I
--3.0
--2.5
C -- VBE
R
B
+
100µF 470µF
+
VCC=12VVBE= --5V
CE
--10mA
CE
R
L
=24Ω
I
-- V
10mA
20mA
I
C
C
2.0
1.8
40mA
--8mA
--6mA
--4mA
--2mA
IB=0 IB=0
--0.8 --0.9
-- V
--1.0
IT04603
CPH3122
1.6
1.4
-- A
C
1.2
1.0
0.8
0.6
Collector Current, I
0.4
0.2
0
0 0.2 0.30.1 0.4 0.5 0.6 0.7
30mA
50mA
CPH3222
Collector-to-Emitter Voltage, V
3.0
--
CE
8mA
V
BE
VCE= --2V
2.5
CE
0.8 0.9
-- V
CPH3222
VCE=2V
6mA
4mA
2mA
1.0
IT04604
-- A
--2.0
C
--1.5
--1.0
Collector Current, I
--0.5
0
0
--0.2 --0.4 --0.6 --0.8 --1.0 --1.2
25°C
Ta=75°C
Base-to-Emitter V oltage, V
--25°C
BE
-- V
IT04605
-- A
2.0
C
1.5
1.0
Collector Current, I
0.5
0
0
0.2 0.4 0.6 0.8 1.0 1.2
C
25°C
Ta=75°
Base-to-Emitter V oltage, V
--25°C
BE
-- V
IT04606
No.7220-2/5
Page 3
1000
FE
CPH3122 / CPH3222
h
h
-- I
FE
7
5
3
2
Ta=75
25°C
--25
°C
°C
C
CPH3122
VCE= --2V
1000
FE
7
5
3
FE
Ta=75°C
25°C
--25°C
-- I
C
CPH3222
VCE=2V
100
DC Current Gain, h
7
5
3
23 57
--0.01
--0.1
Collector Current, I
1000
7
5
-- MHz
T
3
2
100
Gain-Bandwidth Product, f
7
5
23 57
--0.01
--0.1
Collector Current, I
100
7
23 57
f
--
T
23 57
Cob -- V
2
DC Current Gain, h
100
7
23 57
--1.0
-- A
C
I
C
CPH3122
--10
IT04607 IT04608
1000
VCE= --10V
-- MHz
T
100
Gain-Bandwidth Product, f
23 57
C
--1.0
-- A
--10
IT04609 IT04610
CB
CPH3122
0.01
7
5
3
2
7
5
0.01
7
23 57
23 57
f=1MHz
5
23 57
0.1
Collector Current, I
f
I
--
T
C
23 57
0.1
Collector Current, I
Cob -- V
CB
C
C
1.0
-- A
1.0
-- A
23 57
CPH3222
VCE=10V
23 57
CPH3222
f=1MHz
10
10
5
3
2
Output Capacitance, Cob -- pF
10
--1.0
7
5
3
2
(sat) -- mV
CE
--100
7
5
3
2
Collector-to-Emitter
Saturation V oltage, V
--10
--0.01
23 57
Collector-to-Base Voltage, V
CPH3122
IC / IB=20
23 57
Collector Current, I
--10
VCE(sat) -- I
°C
Ta=75
--25°C
23 57
--0.1
25°C
C
CB
C
--1.0
-- A
3
2
Output Capacitance, Cob -- pF
23 5
-- V
IT04611
23 57
IT04613 IT04614
10
1.0
5
3
2
(sat) -- mV
100
CE
7
5
3
2
10
Collector-to-Emitter
Saturation V oltage, V
7
5
0.01
23 57
Collector-to-Base Voltage, V
CPH3222
IC / IB=20
23 57
Collector Current, I
10
VCE(sat) -- I
Ta=75°C
--25°C
23 57
0.1
C
23 5
-- V
CB
C
25°C
23 57
1.0
-- A
No.7220-3/5
IT04612
Page 4
3
2
--1000
7
5
(sat) -- mV
3
CE
2
--100
7
5
3
Collector-to-Emitter
Saturation V oltage, V
2
--10
--0.01
3
2
CPH3122
IC / IB=50
23 57
VCE(sat) -- I
Ta=75°C
--25°C
23 57
--0.1
Collector Current, I
VBE(sat) -- I
25°C
C
CPH3122 / CPH3222
C
23 57
--1.0
-- A
C
IT04615 IT04616
CPH3122
IC / IB=50
7
5
3
2
(sat) -- mV
CE
100
7
5
3
2
Collector-to-Emitter
Saturation V oltage, V
10
0.01
3
2
CPH3222
IC / IB=50
23 57
VCE(sat) -- I
°C
Ta=75
25°C
23 57
0.1
Collector Current, I
VBE(sat) -- I
--25°C
C
C
-- A
C
1.0
23 57
CPH3222
IC / IB=50
(sat) -- V
BE
--1.0
7
5
Base-to-Emitter
Saturation V oltage, V
3
--0.01
10
7
I
CP
5
I
=3A
C
3
2
-- A
1.0
D
7
5
3
2
0.1
7
CPH3123 / CPH3223
5
Collector Current, I
Ta=25°C
3
Single pulse
2
For PNP, the polarity is reversed
Mounted on a ceramic board(600mm
0.01
0.1
Ta= --25
75°C
25°C
23 57
--0.1
23 57
Collector Current, I
A S O
=5A
100ms
DC operation
23 57
Collector-to-Emitter Voltage, V
23 571023 5
1.0
C
°
10ms
--1.0
-- A
C
1ms
2
✕0.8mm)
500µs
CE
<50µs
-- V
(sat) -- V
BE
1.0
Ta= --25°
7
5
Base-to-Emitter
Saturation V oltage, V
3
23 57
IT04617 IT04618
100µs
-- W
C
Collector Dissipation, P
IT04619 IT04620
23 57
0.01
0.1
Collector Current, I
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 20 40 60 80 100 120 140 160
Mounted on a ceramic board(600mm
Ambient Temperature, Ta -- °C
C
75°C
23 57
P
-- Ta
C
25°C
1.0
-- A
C
CPH3122 / CPH3222
2
✕0.8mm)
23 57
No.7220-4/5
Page 5
CPH3122 / CPH3222
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2002. Specifications and information herein are subject
to change without notice.
No.7220-5/5
PS
Loading...