Sanyo CP29KX2Z, CP29SV2Z, CP29SV2ZA, CP29KX2ZA Instruction Manual

INSTRUCTION MANUAL

Colour Television

CP29KX2Z(A)
CP29SV2Z(A)

Multi System
CATV Hyper Band
256 Programmes with Automatic Tuning
AV Stereo Sound System

(AV stereo sound system can reproduce a stereo sound only when a stereo signal
is inputted from audio input jacks of the AV terminal.)

GAME

Contents

Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3

Aerial Connection . . . . . . . . . . . . . . . . . . 3

Front Controls . . . . . . . . . . . . . . . . . . . . 4-5

Remote Control Transmitter . . . . . . . . . . 6

Battery Installation of

the Remote Control Transmitter . . . . . . . . 6

Warnings and Cautions . . . . . . . . . . . . . . 7

General Operation

Power ON/OFF . . . . . . . . . . . . . . . . . 8

Auto Shut Off Function . . . . . . . . . . . 8

Direct Programme Selection . . . . . . . 8

Programme UP and Down . . . . . . . . . 8

Channel Scanning . . . . . . . . . . . . . . . 8

Volume Control . . . . . . . . . . . . . . . . . 9

Recall . . . . . . . . . . . . . . . . . . . . . . . . 9

Sound Mute . . . . . . . . . . . . . . . . . . . 9

Alternate . . . . . . . . . . . . . . . . . . . . . . 9

Quick Picture Controls . . . . . . . . . . . . 9

Bass Expander . . . . . . . . . . . . . . . . . 9

Surround ON/OFF . . . . . . . . . . . . . . . 9

Off Timer . . . . . . . . . . . . . . . . . . . . . . 10

On Timer . . . . . . . . . . . . . . . . . . . . . . 10

Colour and Sound System

Setting of the Colour System . . . . . . . 11

Setting of the Sound system . . . . . . . . 11

Picture Adjustment . . . . . . . . . . . . . . . . . 12

Audio Adjustment . . . . . . . . . . . . . . . . . . 13

Tuning of the Channels

Automatic Tuning . . . . . . . . . . . . . . . 14

Semi-auto Tuning and Manual Tuning .

Channel Copy . . . . . . . . . . . . . . . . . . 16

Channel Swapping . . . . . . . . . . . . . . 16

Skip Channel Set and Cancel . . . . . . 17

Setting of the Private Position . . . . . . . . 18

Setting of the OSD Language . . . . . . . . . 19

English . . . . . . . . . . . . . . . . . . . . . . . . 19

Thai . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Arabic . . . . . . . . . . . . . . . . . . . . . . . . 19

Russian . . . . . . . . . . . . . . . . . . . . . . . 19

French . . . . . . . . . . . . . . . . . . . . . . . . 19

Indonesian . . . . . . . . . . . . . . . . . . . . . 19

Game (Air Tennis) . . . . . . . . . . . . . . . . . . 20

How to go into game mode . . . . . . . . . 20

How to play . . . . . . . . . . . . . . . . . . . . 20

Available key in game . . . . . . . . . . . . . 20

. . . 15

Connecting other Equipment

Connecting to the Rear AV1 Input Jacks
Connecting to the Front AV2 Input Jacks
Selecting the Colour System in AV mode
Connecting to the Monitor Output Jacks
AV Connection to the Aerial Socket

Care and Cleaning . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . 23

Helpful Hints-Problems/Solutions . . . . . . 24

. . . . 21

. . . . 21

. . . . 22

. . . . 22

. . . . . . . 23

2

Plug & Play

Aerial Connection

Automatic setting up channels

This TV set provides a self-automatic tuning and
sorting system function called “Plug & Play”. It
automatically begins searching and storing of all
available channels when switching-on the TV set
for the first time.

Let’s start !

Connect power cord of the TV set to a wall

outlet, and turn on the TV set by pressing

1

the Mains ON/OFF button.Self-automatic
tuning system will be started as follows;

I AM SEARCHING
ALL PROGRAMMES.
PLEASE WAIT.

1

After completing this procedure, the
programme position 1 is selected and the ending
messages on the screen.

Note: The Plug & Play can be cancelled at

any time by pressing the MENU button

Press any of the control buttons to make

2

the ending message disappear. (Or will
automatically return to normal TV display
after 10 seconds.)

✐ This procedure only appears at the first

switch-on time.

■ If no TV stations are found, the display shown

below will appear. Please check if the antenna

is connected properly.



AUTO SET-UP
COMPLETED.
HAPPY VIEWING !

Connecting Outdoor Aerial

Connect the cable with a plug from a UHF (or
VHF) aerial to the aerial socket on the cabinet
back.

Outdoor Aerial

Aerial Cable

ANT.75

Ω

For all aerial circuit problems please consult
your local dealer.

Aerial Socket

NO STATION.

PLEASE CONNECT

ANTENNA PLUG.

If it isn’t connected properly, connect antenna
and Automatic Tuning will be reset.

3

Front Controls

MODEL CP29KX2Z(A)

Each button listed in this section has the same function as it’s
corresponding button on the remote control.

L - AUDIO - R

VIDEO

TV/AV MENU

+

CH

TV/AV
Selector

MENU

VOLUME

Mains ON/OFF
button

Remote Control
Detector

Stand-by and Power Indicator

Programme UP/DOWN

Audio Input Jack - Right (AV2)

Audio Input Jack - Left (AV2)

Video Input Jack (AV2)

Headphone Jack (Mini Stereo Jack)

(For personal listening, a headphone can be connected to the
headphone jack)

4

Front Controls

MODEL CP29SV2Z(A)

Each button listed in this section has the same function as it’s
corresponding button on the remote control.

Press to open

Mains ON/OFF
button

Remote Control
Detector

Stand-by and Power Indicator

AV2 IN

VIDEO

L AUDIO R

(MONO)

TV/AV

MENU

+

CH

TV/AV
Selector

MENU

Audio Input Jack - Right (AV2)

Audio Input Jack - Left (AV2)

VOLUME

Programme UP/DOWN

Video Input Jack (AV2)

Headphone Jack (Mini Stereo Jack)

(For personal listening, a headphone can be connected to the headphone jack)

5

Remote Control Transmitter

-/--

TV / AV Selector button

Programme Selector button

DIGIT button

VOLUME - button

Programme DOWN button

CHANNEL SCAN button

STEREO/MONO button

(this button is not used)

SWAP button

SOUND MODE button

(this button is not used)

SOUND SYSTEM button

TV/AV

TIMER

CH SCAN

A•B

BASS

S.SYS C.SYS

P

MENU

-/--

CH

CH

SWAP SOUND

SURROUND

PICTURE

JXMRM

POWER ON / OFF button

P

TIMER button

MUTE button
ALTERNATE button

MENU button

Programe UP button

VOLUME + button

RECALL button

BASS EXPANDER button

PICTURE MODE button

SURROUND button

COLOUR SYSTEM button

Battery installation of the Remote Control Transmitter

1. Open the battery cover.

2. Install two “AA” 1.5 volt batteries so that the “+” and “-” marks

on the batteries match the “+” and “ - ” marks inside the unit.

3. Close the battery cover.

Note: Replace the batteries when the TV set is showing the

following symptoms:
Operation is unsteady or erratic, sometimes the TV set
does not work with transmitter.
Discharged batteries may leak and damage the unit. The
normal life of batteries should be from nine to ten months.

6

Battery
Cover

Warnings and Cautions

Warning

High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to quali­fied service personnel.

Warning

Do not drop or push objects into the televi­sion cabinet slots or openings. Never spill any
kind of liquid on the television receiver.

Warning

To prevent fire or electrical shock hazard, do
not expose the television receiver to rain or
moisture.

Caution

When the television receiver is not used for an
extended period of time, it is advisable to discon­nect the AC power cord from the AC outlet.

Caution

Avoid exposing the television receiver to direct
sunlight and other source of the heat.
Do not stand the television receiver directly on
other products which give off heat. E.g. video
cassette players, audio amplifiers.

Caution

Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure
of electrical components.

Caution

Never stand on, lean on or push suddenly the
television or its stand.
You should pay special attention to children.
Serious injury may result if it should fall.

Caution

Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an individual,
and damage to the television, may result if it should
fall.

Caution

Do not squash power supply cord under the tele­vision receiver.

Minimum distances

10cm

20cm

10cm

5cm

Caution

5cm

If the television is to be built into a compartment
or similarly enclosed, the minimum distances
must be maintained. Heat build-up can reduce
the service life of your television, and can also be
dangerous.

7

General Operation

Power ON/OFF

To switch on or off the TV ;

Press the Mains ON/OFF button.
The power of the TV is turned on or off complete­ly. If no picture appears but the Standby and
Power indicator illuminates, press the Power
ON/OFF button of the remote control transmitter
as the TV set is in standby mode.

To set the TV to standby mode;

Press the Power ON/OFF button.
During Standby mode the Standby and Power
indicator illuminates more brightly.

TV/AV

P

TIMER

P

To turn on the TV from the standby mode,
press any of the following button.

● Power ON/OFF button of the remote

control transmitter.

● Programme UP/DOWN of the remote

control transmitter or the TV set.

● 1 to 9, 0 button on the remote control

transmitter.

Important !

Be sure to set the Mains ON/OFF switch to the
off position, if the power failure occurs while
viewing.

Auto Shut Off Function

This TV set incorporates the AUTO SHUT OFF
function. Even if the TV is left on after you have
gone to sleep, the TV set changes to the standby
mode within 10 minutes after all broadcasts have
ended.

OFF 0:10

Direct Programme Selection

Example

To select programme position 8;

8

Press “8” button.

8

To select programme position 27;

-/--

- - 2 - 27

27

Press the DIGIT button. Press “2”button. Press “7” button.

To select programme position 125;

-/-- -/--

- - 1- - 12- 125

25

Press the DIGIT button twice. Press “2”button. Press “5”button.

To select programme position 255;

-/-- -/-- -/--

2- - 25- 255

55

Press the DIGIT button 3 times. Press “5” button.
Press “5”button.

Programme Up and Down

Press the Programme UP (CH▲ ) button to

select the next programme position.

Press the Programme DOWN (CH▼ )

button to select the previous programme position.

Channel Scanning

Press the CHANNEL SCAN button to search for
a programme. The channel positions are auto­matically scanned, and the channel scanning will
stop at the position where it began. To stop at the
position you want, press this button again.

CH SCAN

7

8

9

10

11

8

General Operation

Volume Control

Increase or decrease the sound volume level by
pressing the VOLUME (+ or -) buttons.

BASS EXPANDER ON
SOUND

IIIIIIIIIIII

RECALL

To di splay the on sreen indications, press the
RECALL button.

Off Timer

On Timer

Sound
System

Screen display disappears after about 5 seconds.

Note: The COLOUR SYSTEM button and SOUND SYS­TEM button can be operated to display the screen

indications.

OFF 0:30
ON 3:30 6

BG

29

AUTO

Programme
Position

Colour
System

Sound Mute

Should you wish to mute the sound (e.g. While
talking on the telephone), press the SOUND
MUTE button.
To switch the sound back on, press the SOUND

MUTE button again or VOLUME +/-.

BASS EXPANDER ON
SOUND MUTE

IIIIIIIIIIII

Quick Picture Controls

Press the PICTURE MODE button to select the
following picture modes; “PERSONAL”,
”DYNAMIC”, ”NATURAL”, “ECO” and “GAME”.
Select picture modes to suit picture type you are
watching.
Each time the PICTURE MODE button is
pressed, picture settings changes as follows;

PERSONAL

DYNAMIC

NATURAL

ECO

GAME

■ Picture Settings are

set to your preference.
(Refer to page 12.)

■ Emphasize very vibrant

colours. (Suitable for
AV mode in brightly-lit
room condition)

■ Emphasize original

colours.

■ Low power mode.

■ Picture mode that is

gentle on the eyes.
Perfect for TV game
due to subdued colour
and soft contrast.

Bass Expander

To get a emphasis bass sound, press the BASS
EXPANDER button.

BASS EXPANDER ON

OFF

Surround ON/OFF

Press the SURROUND button to enjoy Surround
sound.

SURROUND ON

OFF

ALTERNATE

Press the ALTERNATE button, and the
programme position will alternately select the
previous position and the present position.

4

2

Note: When the Stereo audio channel is selected

in the AV mode, surround mode is changed as
follows;
“ SURROUND 1”, “SURROUND 2” and
“SURROUND OFF”. “SURROUND 1” is normal
surround mode. Selection of “SURROUND 2”
obtains a deeper surround effect.

9

General Operation

OFF TIMER

The OFF TIMER will switch off the TV automati­cally after 30 minutes, 1 hour, 1 hour and 30
minutes, or 2 hours.

Press the TIMER button.

1

OFF 0:00

Each time the TIMER button is pressed, timer
function is changed as follows;

OFF 0:00

(Off Timer)

Press the VOLUME ( + or - ) button to
select the time period.

2

■ Just one minute before switching off the TV,

“OFF 0:01” will be display on the screen.

■ To cancel the OFF TIMER, select “OFF 0:00”

by pressing the VOLUME (+ or - ) button.

■ The OFF TIMER cancels when the TV set is

turned off or if a power failure occurs.

ON TIMER

When the ON TIMER is set. TV will automatically
be switched on to the selected programme
position when the specified time has elapsed.

Press the TIMER button twice.

(OFF TIMER setting mode)

ON 0:00 2

(On Timer)

(Display Off)

1

(ON TIMER setting

ON 0:00 2

Programme position for when TV
is switched on by ON TIMER.

mode)

Press the VOLUME ( + or - ) button. The
set time will be increased or decreased by

2

10 minutes each time the button is pressed;
the maximum time which can be set is 24
hours. When the ON-TIMER has been set,
the colour of Standby and Power Indicator
changes to yellow.

Setting programme position for when TV is
switched on by ON TIMER

To set programme position to between 0 and 9,
press the desired number button “0” - “9” while
the ON TIMER screen is shown.

ON 3:30 9

For example, to set programme position 26, press
the DIGIT button, “2” button then “6” button while
the ON TIMER screen is shown.

ON 3:30 26

It is also possible to set the programme position
by pressing the Programme UP or DOWN
button.
To set an AV1 position for when the TV is
switched on by the ON TIMER, press the TV/AV
Selector while the ON TIMER screen is shown
to select position AV1.

ON 3:30 2

■ If no operation is performed after the TV has

been switched on by the ON TIMER, such as
if you are not at home, the TV will be
automatically switched off after approximately
2 hours.

■ If the TV is already switched on when the time

set for the ON TIMER has been reached, only
the programme position will be changed to the
set programme position.

■ Cancelling ON TIMER

To cancel the ON TIMER, press the VOLUME
( + or - ) button to set it to “ON 0:00” while the
ON TIMER screen is shown.
Switching off the TV by pressing the Mains
ON/OFF button will also cancel the ON
TIMER settings.

ON 3:30 AV1

10

Colour and Sound System

SIF

BG

MEMORY

OK

Setting of the Colour System

Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained even when the
broadcasting or AV signal is received, press the
RECALL button or COLOUR SYSTEM button
repeatedly until the optimum image can be pro­duced.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)

Each time the RECALL button or COLOUR SYS-
TEM button is pressed, colour system changes
as follows;

6

AUTO

6

PAL

6

NTSC

Note: A colour system entry to the memory
cannot be made during TV mode, make it during
Semi-auto or manual tuning mode. (Refer to
page 15.)

NTSC4.43

Setting of the Sound System

To set the sound system, make it during Semi-Auto
Tuning or Manual Tuning mode. (For further details
concerning this operation refer to page 15.)
When the sound is not clear or no sound is pro­duced on a programme number position, select
sound system repeatedly until the optimum sound
is obtained.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Sound System.)

To select sound system:

■ Press the SOUND SYSTEM button to

select the sound system directly. The sound
system will be memorized automatically.

or:

1) Select “SIF” with the Programme UP
or DOWN button in the Semi-auto or
Manual Tuning mode.Then press the VOLUME

-

( + or

system

) button to select a optimum sound

(Semi-Auto or Manual Tuning mode )

MODE
SEARCH
POSITION
SYSTEM

SKIP
MEMORY

BG

(5.5MHz)

SEMI
START

2

AUTO

OFF

-

-

P

SELECT ADJUST BACK

P

M

EXIT

I

(6.0MHz)

(6.5MHz)

DK

M

(4.5MHz)

2) To enter a sound system selection into
the memory, select “MEMORY” and press the

VOLUME + or -button.

MODE
SEARCH

6

POSITION
SYSTEM
SIF
SKIP

SEMI
START

2

AUTO
BG
OFF

P

SELECT ADJUST BACK

P

M

EXIT

Broadcast Transmission System List

Area

Country

Colour

System

Sound

System

Union of Arab Emirates,

Middle

East

Asia

Oceania

Kuwait, Oman, Qatar,
Yemen,

Bahrain,

etc.
Indonesia, Malaysia,
Singapore, Thailand,

China,

etc.

Hong kong

Saudi Arabia,
Iraq, Iran, Lebanon,etc.

Russian Federation,etc.

Myanmar, etc.

Australia,
New Zealand, etc.

etc.

PAL

PAL

PAL

SECAM

SECAM

NTSC

PAL

B/G

D/K

I

B/G

D/K

M

B/G

11

Picture Adjustment

PICTURE

PICTURE

COLOUR

BRIGHT

COLOUR

Picture Adjustment Menu

BRIGHT
CONTRAST
TINT
SHARPNESS

IIIIIIIIIIII

SELECT ADJUST BACK

Page 1

The 2nd page is not displayed when there is no
TINT adjustment.

Picture

Adjustment Item

COLOUR : Adjusts colour intensity.
BRIGHT : Adjusts picture brightness.
CONTRAST : Adjusts picture contrast.
TINT : Adjust colour tints. (Displayed only on

NTSC or NTSC4.43 system signal
reception.)

SHARPNESS : Adjusts picture detail.
WHITE TONE : Adjusts white balance.
FINE TUNING : Fine tuning in case of weak

broadcast signal or poor reception. Only
displayed in TV mode. Will not be displayed in AV
mode.

Note:

The picture adjustment data (Colour, Brightness,
Contrast, Tint and Sharpness) is automatically
stored in PERSONAL mode of the Quick Picture
Controls (See page 9). These settings will be
used when PERSONAL mode is selected.

WHITE TONE
FINE TUNING

P

P

M

EXIT

SELECT ADJUST BACK

Page 2

P

P

M

EXIT

When “PICTURE” is not selected, select

“PICTURE” with the Programme UP or

2

DOWN button.

AUDIO
PRESET
LANGUAGE
GAME

Press the VOLUME + or-button to display
Picture Adjustment menu.

3

BRIGHT
CONTRAST
SHARPNESS
WHITE TONE
FINE TUNING

IIIIIIIIIIII

P

SELECT ADJUST BACK

P

M

EXIT

■ To return to Main menu, press the

ALTERNATE button.

■ To return to the normal TV mode, press the

MENU button. ( Or will automatically return to
the normal TV mode after 20 seconds.)

Select desired control by pressing the

4

Programme UP or DOWN button.

COLOUR

CONTRAST
SHARPNESS
WHITE TONE
FINE TUNING

IIIIIIIIIIII

P

SELECT ADJUST BACK

P

M

EXIT

PERSONAL

Basic picture adjustment operation

Press the MENU button for MAIN menu
display.

1

AUDIO
PRESET
LANGUAGE
GAME

SELECT ENTER

(MAIN MENU)

M

EXIT

12

Press the VOLUME + or-button to alter

5

settings.

BRIGHT

IIIIIIIIIIII

P P

ADJUST BACK

M

EXIT

Approximately five seconds after you release the

-

VOLUME (+ /

) button, the screen display

switches from the adjustment screen to the nor­mal TV screen.To return to the Picture adjustment
menu, press the ALTERNATE button within five
seconds of releasing the VOLUME (+ / -) button.

Audio Adjustment

PICTURE

Audio adjustment Menu

TREBLE
BALANCE
BASS EXPANDER OFF

SURROUND OFF

IIII

P

SELECT ADJUST BACK

Audio Adjustment Item

BASS : Bass Adjustment
TREBLE :Treble Adjustment
BALANCE : Left/right speaker volume balance

adjustment

BASS EXPANDER : Operates BASS EXPANDER

SURROUND : Operates SURROUND on and off.

Note: When the stereo signal is inputted from the
right and left audio input terminals in the AV mode,
surround mode is changed as follows;
“ SURROUND 1”, “SURROUND 2” and
“SURROUND OFF”. “SURROUND 1” is normal
surround mode. Selection of “SURROUND 2”
obtains a deeper surround effect.

P

M

on and off.

EXIT

Press the VOLUME + or-button for Audio
Adjustment menu display.

3

TREBLE
BALANCE
BASS EXPANDER OFF

SURROUND OFF

IIII

P

SELECT ADJUST BACK

P

M

EXIT

■ To return to Main menu, press the ALTERNATE

button.

■ To return to normal TV mode, press the MENU

button. (Or will automatically return to normal TV
mode after 20 seconds.)

Select desired control by pressing the
Progamme UP or DOWN button.

4

BASS

BALANCE
BASS EXPANDER OFF
SURROUND OFF

Audio adjustment operation

Press the MENU button for MAIN menu
display.

1

AUDIO
PRESET
LANGUAGE
GAME

2

SELECT ENTER

Select “AUDIO “ by pressing the Programme
UP or DOWN button.

PICTURE

PRESET
LANGUAGE
GAME

SELECT ENTER

M

EXIT

M

EXIT

P

SELECT ADJUST BACK

P

M

EXIT

Press the VOLUME + or - button to alter
settings.

5

BASS

BALANCE
BASS EXPANDER OFF
SURROUND OFF

IIII

Approximately 20 seconds after you release the

-

VOLUME (+ /

) button, the screen display switch-

es from the adjustment screen to the normal TV
screen.
To return to the MAIN menu, press the ALTER-

NATE button within 20 seconds of releasing the
VOLUME (+ / -) button.

When adjustment is completed, press the
MENU button to return to normal TV dis-

6

play. (Or will automatically return to TV dis­play after 20 seconds.)

13

Tuning of the Channels

SEARCH

SIF

POSITION

START

1

BG

MODE

AUTO

SEARCH
POSITION

START

1

MODE

AUTO

SYSTEM

AUTO

PICTURE

-/--

CH

CH

Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.

There are three ways of tuning as follows;

1. Automatic Tuning (the basic way):

All receivable channels are automatically tuned
in and memorized in consecutive programme
position.

2. Semi-Auto Tuning:

Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.

3. Manual Tuning:

Manually tune a channel if it cannot be auto­matically tuned, such as when the signal is
poor.

Automatic Tuning

Press the MENU button for MAIN menu

display.

1

AUDIO
PRESET
LANGUAGE
GAME

To select colour system

1) Select SYSTEM with the Programme UP
or DOWN button.

-

2) Press the VOLUME ( + or

) button to

select a optimum colour system.

AUTO

PAL

NTSC4.43

NTSC

(Refer to Broadcast Transmission System List
indicated by page 11 in a setup of colour system.)

When the sound is not clear or no sound is pro­duced on a programme number position, change
the sound system.

To select sound system

1) Select SIF with the Programme UP or
DOWN button.

-

2) Press the VOLUME ( + or

) button to

select an optimum sound system.

SELECT ENTER

M

EXIT

Select “PRESET” by pressing the
Programme UP or DOWN button.

2

PICTURE
AUDIO

LANGUAGE
GAME

Press the VOLUME + or-button for
PRESET menu display. On entering

3

PRESET display, Automatic Tuning will be
selected initially.

SEARCH
POSITION
SYSTEM
SIF

START

1
AUTO

BG

Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained, change the
colour system until the optimum image can be
produced.

14

B/G

(5.5MHz)

I

(6.0MHz)

D/K

(6.5MHz)

(4.5MHz)

(Refer to Broadcast Transmission System List
indicated by page 11 in a setup of sound system.)

Select “SEARCH” by pressing the

4

Programme UP or DOWN button.

MODE

POSITION
SYSTEM
SIF

AUTO

1
AUTO

BG

Press the VOLUME (+) button to start
channel tuning.

5

1

After all receivable channels have been found
and stored, the TV set automatically returns to
programme position “1”.

■ The Automatic Tuning operation can be

cancelled at any time by pressing the
Programme UP or DOWN button.

M

Tuning of the Channels

MEMORY

OK

SYS

MEMORY

OK

Semi-Auto Tuning and Manual Tuning

Press the MENU button for MAIN
menu display.

1

Select “PRESET” by pressing the
Programme UP or DOWN button.

2

PICTURE
AUDIO

LANGUAGE
GAME

Press the VOLUME + or-button for
PRESET menu display. On entering

3

PRESET display, Automatic Tuning will be
selected initially.

Select “SEMI” or “MANUAL” by pressing the
VOLUME + or-button.

4

Semi-Auto Tuning Mode

SEARCH
POSITION
SYSTEM

SIF

SKIP
MEMORY

START

2
AUTO

BG

OFF

-

-

If it is required, change the colour and sound
system. To enter the colour and sound system
into memory, select “MEMORY” and press the

VOLUME + or -button.

SKIP

OFF

SELECT ADJUST BACK

For example, to pre-set a required channel

onto Programme Position 6, select

5

“POSITION” with the Programme UP or
DOWN button and press remote control

button number 6 and enter 6. (In this case,
the channel being watched will change to
channel 6.)

SEMI
START

AUTO

BG

OFF

-

MODE
SEARCH

SYSTEM

SIF

SKIP
MEMORY

Manual Tuning Mode

SEARCH
POSITION
SYSTEM

SIF

SKIP
MEMORY

P

P

M

EXIT

-

START

2
AUTO

BG

OFF

-

-

For example, to enter Programme Position 27,

press the DIGIT button, press the remote control
button 2 followed by 7. It is also possible to select
the Programme position number by pressing either

-

of the VOLUME + or

button. In this case, select

“POSITION” with the Progamme UP or DOWN
button first, then press the VOLUME + or -

-

button.(Pressing the VOLUME + or

button will

only alter the programme position number.)

Select “SEARCH” by pressing the
Programme UP or DOWN button.

6

MODE

POSITION

SYSTEM

SEMI

6

AUTO

Semi-Auto Tuning:

Press and release the VOLUME + or - button
to search for required TV station. Once a
station is located, tuning will automatically
stop. Continue till desired channel is located.

MODE

POSITION

SYSTEM

SEMI

II

6

AUTO

Manual Tuning :

Press and hold the VOLUME + or - button to
search for required TV station.

TEM

MANUAL

II

6

AUTO

MODE

POSITION

The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME

-

button will move tuning toward the lower
frequencies.

Once desired channel is located, select
“MEMORY” by pressing the Programme UP

7

or DOWN button.

Press the VOLUME + or-button to enter
the desired channel into Programme

8

Position 6.

SKIP

OFF

P

SELECT ADJUST BACK

P

M

EXIT

To pre-set other Programme Positions, repeat

steps 5-8.

Press the MENU button to return to

9

normal TV display.

15

Tuning of the Channels

Channel Copy Channel Swapping

This function can be utilized after Automatic

Tuning.

For example, to copy a TV channel on
programme position “2” onto programme
position “6”;

Select programme position “2”.

1

2

Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 15.)

2

Select “POSITION” with the Programme UP
or DOWN button.

3

MODE
SEARCH

SYSTEM

SIF

SKIP
MEMORY

Select position “6” with the VOLUME + or
button.

4

MODE
SEARCH

SYSTEM

SIF

SKIP
MEMORY

Select “MEMORY” by pressing the
Programmme UP or DOWN button.

5

SEMI

START

AUTO

BG

OFF

-

-

SEMI

START

AUTO

BG

OFF

-

-

Use this channel swapping feature to swap the
channels between two stored programme
position. This feature is particularly useful after
automatic tuning.

For example, to swap the channel between
programme position “6” and programme
position “12”.

6

Select programme position “6” .

1

Press the SWAP button.

2

SWAP 6 AND

-

Press the DIGIT button, “ 1 “ button and then
“ 2 ” button on the remote control to enter

3

programme number 12. (For example, to
enter programme number “ 3 “, press “ 3 ”
button only. )

SWAP 6 AND 12

12

6

-

Press the VOLUME + or-button to
memorize.

6

MODE
SEARCH
POSITION
SYSTEM

SIF

SKIP

Press the MENU button to return to normal
TV display.

7

SEMI

START

6
AUTO

BG

OFF

P

SELECT ADJUST BACK

P

M

EXIT

16

Press the SWAP button.

4

SWAPPING

12

The two TV channels will now have changed
places.

12

6

Tuning of the Channels

Skip Channel Set and Cancel

When there is a position you do not use, Position 4
for example, by setting the SKIP Channel function
it is possible to jump over this position, when you
are selecting a channel using the Programme

UP/DOWN or CHANNEL SCAN button.

3

4

Skip

For example, to set programme position “4”
as Skip channel ;

Enter to SEMI-AUTO or MANUAL tuning

1

mode. (Refer to page 15.)

Select “POSITION” with the Programme
UP or DOWN button.

2

MODE
SEARCH

SYSTEM

SIF

SKIP
MEMORY

SEMI

START

AUTO

BG

OFF

-

-

P

SELECT ADJUST BACK

P

M

EXIT

Press remote control “4” button to select
Programme Position 4. Use the DIGIT but-

3

ton and Programme SELECTOR (Number
buttons) to enter Programme Number. Do
not use the VOLUME + or
programme position in this settings.

5

-

button to enter

Select “SKIP” by pressing the Programme
UP or DOWN button, then press the

4

VOLUME + or-button to set SKIP to ON.
To cancel Skip Channel function, set to OFF.

MODE
SEARCH
POSITION
SYSTEM

SIF

MEMORY

SEMI
START

4
AUTO

BG

-

-

P

SELECT ADJUST BACK

P

M

EXIT

Select “MEMORY” by pressing the

5

Programme UP or DOWN button, then
press the VOLUME + or

-

button for

memory.

MODE
SEARCH
POSITION
SYSTEM

SIF

SKIP

SEMI
START

4
AUTO

BG

ON

P

SELECT ADJUST BACK

P

M

EXIT

Any number of channels maybe set as Skip
Channels.

Press the MENU button to return to

6

normal TV display.

MODE
SEARCH

SYSTEM

SIF

SKIP
MEMORY

SEMI

START

AUTO

BG

OFF

-

-

SELECT ADJUST BACK

P
M

P

EXIT

17

Setting of the Private Position

Private position is used to restrict of pro­gramme positions that you do not want
others to watch.
Any position can be set as the Private
position.

How to set the Private Position

For example, to set the programme position
“15” as the private position.

Select programme position “15”.

1

15

Press and hold the RECALL button for more
than 2 seconds.

2

15

BG

The programme number “15” will shift to centre of
the screen.

Press the MENU button.

3

15

AUTO

To View a programme on

Select private position (In this case position
“15”).

1

X15

Press and hold the RECALL button for
more than 2 seconds.

2

Private Position

X15

Press the RECALL button for watching a TV
programme.

3

BG

Note: The position “15” is still in the private

position.

15

AUTO

Cancelling of the private position

Select private position (position “15”).

1

X15

Press and hold the RECALL button for more
than 2 seconds.

2

BG

The picture will disappear, and “X 15” will be dis­play on the screen.

The private position setting is now completed.

X15

AUTO

18

X15

Press the MENU button .

3

BG

The private position is now cancelled.

15

AUTO

Setting of the OSD (On Screen Display) Language

PICTURE

English

Press the MENU button for MAIN menu

1

display.

AUDIO
PRESET
LANGUAGE
GAME

Select “LANGUAGE “ by pressing the
Programme UP or DOWN button.

2

PICTURE
AUDIO
PRESET

GAME

Press the VOLUME + or-button for

3

Language menu display.

y

P

C

C

NN

FRANCAIS

BAHASA

INDONESIA

To sets English on screen :
Select “ENGLISH” by pressing the

Programme

or DOWN button.
To return to the normal TV mode, press the
MENU button.

Thai

ENGLISH

y

P

C

C

NN

FRANCAIS

BAHASA

INDONESIA

To sets THAI on screen :

(See the English OSD procedure.)
Select “ ” by pressing the

Programme

or DOWN button.
To return to the normal TV mode, press the MENU
button.

Arabic

ENGLISH

y

P

C

C

NN

FRANCAIS

BAHASA

INDONESIA

To sets ARABIC on screen :

(See the English OSD procedure.)

Select “ ” by pressing the
or DOWN button.
To return to the normal TV mode, press the MENU
button.

Programme

Russian

ENGLISH

FRANCAIS

BAHASA

INDONESIA

P

P

P

B

I

3

A

P

H

A

P

T

A

P

P

M

I

B

NTN

To sets Russian on screen :

(See the English OSD procedure.)

y

P

C

Select “ ” by pressing the

C

NN

or DOWN button.
To return to the normal TV mode, press the
MENU button.

French

ENGLISH

y

P

C

C

NN

BAHASA

INDONESIA

UP

CHOISISSEZ RETOUR

P

P

M

QUITTEZ

To sets French on screen :

(See the English OSD procedure.)
Select “FRANCAIS” by pressing the

Programme

UP or DOWN button.

To return to the normal TV mode, press the
MENU button.

Indonesian

UP

To sets INDONESIAN on screen :

(See the English OSD procedure.)
Select “BAHASA INDONESIA” by pressing the

Programme

To return to the normal TV mode, press the MENU
button.

UP

ENGLISH

.

.

.

y

P

C

C

NN

FRANCAIS

P

P

PILIH KEMBALI

M

KELUAR

UP or DOWN button.

Programme

19

UP

GAME (Air Tennis)

PICTURE

How to go into game mode

Press the MENU button for MAIN menu
display.

1

AUDIO
PRESET
LANGUAGE
GAME

SELECT ENTER

Select “GAME“ by pressing the Programme
UP or DOWN button, then press the

2

+ or - button.

PICTURE
AUDIO
PRESET
LANGUAGE

SELECT ENTER

Note: When “ GAME” is selected, the TV sound

is still heard.

M

EXIT

VOLUME

M

EXIT

Available Keys in the Game

[VOLUME +] button : Right action
[ VOLUME -] button : Left action
[MENU] button : Exit from the game
[ALTERNATE] button : Restart from the

Your score

SCORE

-

3

0

LEVEL8

Ball

game over

Enemy score

Enemy
Racket

Your Racket

To return to the normal TV mode, press the
MENU button.

3

How to Play

When play starts the ball move from upside to
downside. You have to reflect the ball to upside
(enemy-side). If user miss, the enemy score 1
point.
You get 5 points, the stage is clear. Then
game level will be increase ( Level 0 - 9).
But when the enemy score 5 points, the game

is over.

SCORE

-

5

0

LEVEL0

GAME OVER

20

Connecting other Equipment

L-AUDIO-R

VIDEO

L-AUDIO-R

VIDEO

OUTPUT

R

L

INPUT

OUTPUT

A
U
D

I

O

V

I
D
E
O

AUDIO INAUDIO IN

LR

LR

VIDEO INVIDEO IN

AUDIO OUTAUDIO OUT VIDEO OUTVIDEO OUT

L-AUDIO-R

VIDEO

L-AUDIO-R L-AUDIO-R

VIDEOVIDEO

Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of this TV set .
Tapes and discs can be played back.

Connecting to the Rear AV1 Input Jacks

VCR for playback

(Stereo)

To video and
audio outputs

PLAYBACK

(Stereo)

21 AV1 AV2

■ Each time the TV/AV Selector is pressed, AV position is

TV mode

changed as follows;.

■ If the audio signal from a VCR is stereo, be sure to connect the right and left channels to the

respective right and left AUDIO-IN terminals.

When the stereo signal is inputted from the right and left audio input terminals, each time the
SURROUND button is pressed (or selection of On-screen Menu), surround mode is changed as follows;
“ SURROUND 1”, “SURROUND 2” and “SURROUND OFF”.

“SURROUND 1” is normal surround mode. Selection of “SURROUND 2” obtains a deeper surround
effect.

■ To watch video input picture, select AV1 position by pressing the TV/AV Selector.

■ If the external equipment is a monaural one, connect it to the left terminal of AUDIO IN.

SURROUND OFF

SURROUND 1

SURROUND 2

Note: The effect of surround is not obtained although the switching of surround is displayed in this

monaural connection.

Note: ▼A•B (STEREO/MONO) button of the remote control transmitter does not operate in this model.

Connecting to the Front AV2 Input Jacks

It is convenient to use the AV2 input jack on the front panel for equipment that is often connected and
disconnected.

Video Camera,

TV Game etc.

To video and

audio outputs

AV1

PLAYBACK

■ Select “AV2” position by pressing the TV/AV Selector for watching.

(Stereo)

AV2

21

Connecting other Equipment

L-AUDIO-R

VIDEO

OUTPUT

R

L

INPUT

OUTPUT

A
U
D

I

O

V

I

D
E
O

AUDIO IN

AUDIO IN

LR

LR

VIDEO INVIDEO IN

AUDIO OUTAUDIO OUT VIDEO OUTVIDEO OUT

L-AUDIO-R

VIDEO

■ You can select a TV programme while watching a playback from a VCR

For example:

● To select programme position “9” while watching a playback from external VCR, press “9” button of

the remote control. The TV set returns to the TV mode and programme “9” will be selected.

● To select the programme position “26”, press DIGIT (--/-) button, “2” then “6” button. Then TV set

returns to the TV mode and programme position “26” will be selected.

Note: Pressing either of the Programme UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.

Selecting the Colour System in AV mode

Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL button or COLOUR SYSTEM button and select a
suitable colour system.

Each time the RECALL button or COLOUR SYSTEM button is pressed, colour system is

changed as follow;

Colour system setting for AV position is automatically stored in the memory.

AUTO

AV1

AV1

PAL

AV1

NTSC4.43

AV1

NTSC

Connecting to the Monitor Output Jacks

The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use
these terminals to record TV broadcasts and for video dubbing from AV input terminals.

■ To record TV programme, select TV mode

by pressing the TV/AV Selector and
record the desired programme.

Recording TV broadcasts or tape dubbing

■ To dub video from the AV1 terminal input, select

AV1 position by pressing the TV/AV Selector.

15

TV mode

VCR for recording

To video and
audio inputs

AV1

22

Connecting other Equipment

AV Connection to the Aerial Socket

The AV apparatus can also be connected to the
aerial socket of your TV receiver.

PLAYBACK

VCR for

Ω

Aerial Socket

ANT.75

Presetting to watch the video input

1. Playback the VCR .

2. Tune a VCR playback in programme

position that you want. (See Semi-Auto
Tuning and Manual Tuning on pages 15.)

For further details concerning this connection
and adjustment, refer to the operating instruc­tions for the AV equipment.

playback

Care and Cleaning

The surface of the cabinet can be damaged if not
properly maintained. Many common household
aerosol sprays, cleaning agents, solvents and pol­ishes will cause permanent damage to the fine
surface.

1. Unplug the power cord before cleaning
the Television.

2. Clean the screen with a soft cloth

dampened with glass cleaner or warm water.

3. Clean the cabinet with a soft cloth dampened

with a mild household detergent and warm
water. Dry thoroughly.

Specifications

Power Source AC110-240 Volts, 50/60Hz

Colour System PAL/NTSC4.43/NTSC/PAL-60Hz

Sound System B/G, I, D/KK’, M/M

Channel Coverage

VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13,

0-15, 5A(Australia), 1-11(New Zealand)
UHF: 21-69, A14-A69, J13-J62, 28-69(Australia)
CATV: S1

Aerial input impedance 75 Ω

Audio output (RMS) 10W + 10W

Speakers 6 cm x 12 cm x 2 pcs

Ext. terminals

Video inputs:

Phone Jack x 2 (1.0Vp-p, impedance 75 Ω)

Audio inputs:

Phone Jack (L/R) x 2
(436mVrms, impedance more than 40KΩ)

Video monitor outputs:

Phone Jack x 1 (1.0Vp-p, impedance 75 Ω)

Audio monitor outputs:

Phone Jack (L/R) x 1
(436mVrms, impedance less than 600Ω)

Headphone Jack: Mini stereo jack x 1

Dimension

Model CP29KX2Z(A) :

770 (W) x 589 (H) x 499 (D) mm

Model CP29SV2Z(A) :

770 (W) x 590 (H) x 495 (D) mm

Weight

Model CP29KX2Z(A) : approx. 38.4Kg
Model CP29SV2Z(A) : approx. 39.9 Kg

Specifications subject to change without notice.

-

S41, X, Y, Z, Z+1, Z+2

Note: NEVER spray liquids on the screen

because they can run down and drip onto
the chassis. This may cause component
failure not covered under Warranty.

23

Helpful Hints - Problems/Solutions

Before requesting service check the following chart.

Problem : Check these Conditions / Try these solutions:

No picture,
no sound

Poor picture,
sound OK

No colour,
Picture OK

Weak picture

No sound or poor
sound.

Remote Control
will not work.

● Check if TV is plugged in.

● Try a different channel, if OK, probably station trouble.

● Adjust Brightness or Contrast control.

● Adjust Fine Tuning. (See page 12.) ● Check aerial connection.

● Adjust Colour or Tint control. ● Adjust Fine Tuning. (See page 12.)

Check aerial connection.● Is the programme in colour ? Try a different channel.

●

● Select other colour system. (See Setting of the Colour System on page 11.)

● Check aerial connection on back of TV set.

● Check aerial for broken wires. ● Re-orient aerial.

●

Sound Mute may be on. Press the

● Adjust Volume. ●

May be station trouble. Try a different channel.

SOUND MUTE

button on the remote control.

● Select other sound system. (See Setting of the Sound System on page 11.)

● Check batteries. Replace batteries.

● Check if TV set is plugged in. Aim remote control towards front of TV.

Cannot select or
scan some channels.

Blue screen with AV1
or AV2 is displayed

Black screen with X
and programme
position displayed.

Cabinet makes
popping sound.

● Channel may be removed from memory. Add channel to memory manually.

(See “Skip Channel Set and Cancel” on page 17.)

● Check aerial connection.

● Check AV connection. Press the TV/AV Selection button.

● Check external equipment. Switch on external equipment.

● Check to see if channel is set as the Private Position. See “Setting of the

Private Position” on page 18.

● This is a normal condition during warm-up and cool down of the plastic

cabinet parts.

The following faults are not caused by the receiver:

“GHOSTS”

Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”.
These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one
suited for your area.

“INTERFERENCE”

Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be
a temporary condition, but should this interference persist, contact your dealer.

Part No. 1AA6P1P4529 --C4LWG (AC5-G2)

SANYO ELECTRIC Co., Ltd.