Sanyo CP21MF2, CP14KX2(A), CP21KX2(A) Instruction Manual

INSTRUCTION MANUAL

Colour Television

CP21MF2
CP14KX2(A)
CP21KX2(A)

✔ Multi System
✔ CATV Hyper Band
✔ 256 Programmes with Automatic T uning
✔ AV Stereo Sound System

(AV stereo sound system can reproduce a stereo sound only when a stereo signal
is inputted from audio input jacks of the AV ter minal.)

✔ GAME

Read this Instructions Manual with carefully
before operating this Television.
Keep this Instructions Manual for future reference.

Plug & Play . . . . . . . . . . . . . . . . . . . . 3

Aerial Connection . . . . . . . . . . . . . . 3

Front Controls . . . . . . . . . . . . . . . . . 4

Warnings and Cautions . . . . . . . . . . 5

Remote Control Transmitter . . . . . . 6

Battery Installation of

the Remote Control Transmitter . . . 6

General Operation

Power ON/OFF . . . . . . . . . . . . . . 7

Auto Shut Off Function . . . . . . . . 7

Direct Programme Selection . . . . 7

Programme UP and Down . . . . . 7

Channel Scanning . . . . . . . . . . . 7

Volume Control . . . . . . . . . . . . . . 8

Recall . . . . . . . . . . . . . . . . . . . . . 8

Sound Mute . . . . . . . . . . . . . . . . 8

Alternate . . . . . . . . . . . . . . . . . . . 8

Quick Picture Controls . . . . . . . . 8

Bass Expander . . . . . . . . . . . . . . 8

Surround ON/OFF . . . . . . . . . . . 8

Off Timer . . . . . . . . . . . . . . . . . . 9

On Timer . . . . . . . . . . . . . . . . . . 9

Colour and Sound System

Setting of the Colour System . . . . 10

Setting of the Sound system . . . . 10

Picture Adjustment . . . . . . . . . . . . . 11

Audio Adjustment . . . . . . . . . . . . . . 12

Tuning of the Channels

Automatic Tuning . . . . . . . . . . . . 13

Semi-auto Tuning and Manual Tuning .

14

Channel Copy . . . . . . . . . . . . . . . 15

Channel Swapping . . . . . . . . . . . 15

Skip Channel Set and Cancel . . . 16

Setting of the Private Position . . . . . 17

Setting of the Language OSD . . . . . 18

English . . . . . . . . . . . . . . . . . . . . 18

Arabic . . . . . . . . . . . . . . . . . . . . . 18

Thailand . . . . . . . . . . . . . . . . . . . 18

Russia . . . . . . . . . . . . . . . . . . . . 18

French . . . . . . . . . . . . . . . . . . . . 18

Indonesian . . . . . . . . . . . . . . . . . 18

Game (Air Tennis) . . . . . . . . . . . . . . 19

How to play . . . . . . . . . . . . . . . . 19

Available key in game . . . . . . . . . 19

Contents

2

Connecting other Equipment

Connecting to the AV Input Jacks

. . . . . 20

Selecting the Colour System in AV mode

. 21

Connecting to the Monitor Output Jacks

.21

AV Connection to the Aerial Socket

. . . . 22

Care and Cleaning . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . 22

Helpful Hints-Problems/Solutions . . 23

Plug & Play

3

This TV set provides a self-automatic tuning
and sorting system function called “Plug &
Play”. It automatically begins searching and
storing of all available channels when switch­ing-on the TV set for the first time.

2

Press any of the control buttons to

make the ending message disappear.
(Or will automatically return to normal
TV display after 10 seconds.)

After completing this procedure, the
programme position 1 is selected and the
ending messages on the screen.

Note: The Plug & Play can be cancelled at

any time by pressing the MENU button.

✐ This procedure only appears at the first

switch-on time.

1

Connect power cord of the TV set to a

wall outlet, and turn on the TV set by
pressing the Mains ON/OFF button.
Self-automatic tuning system will be
started as follows;

Let’s start !

■ If no TV stations are found, the display

shown below will appear. Please check if
the antenna is connected properly.

If it isn’t connected properly, connect anten­na and Automatic Tuning will be reset.

Aerial Cable

Connect the cable with a plug from a UHF
(or VHF) aerial to the aerial socket on the
cabinet back.

Aerial Socket

For all aerial circuit problems please
consult your local dealer.

Outdoor Aerial

Connecting Outdoor Aerial

Automatic setting up channels

Aerial Connection

Mounting Telescopic Aerial

Telescopic
Aerial

Telescopic
Aerial Feeder

Matching
Box

Aerial Socket

Cabinet Back

(Model CP14KX2(A) only.)

I AM SEARCHING
ALL PROGRAMMES.
PLEASE WAIT.

1

AUTO SET-UP
COMPLETED.
HAPPY VIEWING !

ANT. 75Ω

NO STATION.

PLEASE CONNECT

ANTENNA PLUG.

AUDIO IN VIDEO IN

R

L

ANT. 75‰

AUDIO OUT VIDEO OUT

VOLUME
UP/DOWN

4

Front Controls

Each button listed in this section has the same function as it’s
corresponding button on the remote control.

Programme
UP/DOWN

VOLUME
UP/DOWN

Remote Control
Detector

Stand-by and Power
Indicator

Mains ON/OFF
button

TV/AV Selector

Video Input Jack

Audio Input Jack
(Left)

Audio Input Jack
(Right)

MENU

Model CP21MF2

Model CP14KX2(A)

Programme
UP/DOWN

VOLUME
UP/DOWN

Remote Control

Detector
Stand-by and Power
Indicator

Mains ON/OFF
button

TV/AV Selector

Video Input Jack

Audio Input Jack
(Left)

Audio Input Jack
(Right)

MENU

Model CP21KX2(A)

Remote Control

Detector

Stand-by and Power
Indicator

Mains ON/OFF
button

Video Input Jack

Audio Input Jack
(Left)

Audio Input Jack
(Right)

TV/AV
Selector

MENU

Programme
UP/DOWN

VIDEO

L-AUDI

-R

O

TV/AV

M

CH

+

-

ENU

VIDEO

VIDEO

TV/AV

L-AUDIO-R

TV/AV

MENU

L-AUDIO-R

MENU

CH

CH

If the television is to be built into a compart­ment or similarly enclosed, the minimum
distances must be maintained. Heat build­up can reduce the service life of your televi­sion, and can also be dangerous.

Warnings and Cautions

5

Never stand on, lean on or push suddenly
the television or its stand.
You should pay special attention to children.
Serious injury may result if it should fall.

Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to
an individual, and damage to the television,

may result if it should fall.

When the television receiver is not used for
an extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.

Avoid exposing the television receiver to
direct sunlight and other source of the heat.
Do not stand the television receiver directly
on other products which give off heat. E.g.
video cassette players, audio amplifiers.

Do not block the ventilation holes in the
back cover.
Adequate ventilation is essential to prevent
failure of electrical components.

Do not squash power supply cord under the
television receiver.

Warning

High voltages are used in the operation
of this television receiver. Do not remove
the cabinet back from your set. Refer
servicing to qualified service personnel.

To prevent fire or electrical shock haz­ard, do not expose the television receiver
to rain or moisture.

Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.

Caution

Warning

Warning

Caution

Caution

Caution

Caution

Caution

Minimum distances

Caution

20cm

10cm

10cm

5cm

Remote Control Transmitter

6

1. Open the battery cover.

2. Install two “AA” 1.5 volt batteries so that the “+” and “-”

marks on the batteries match the “+” and “ - ” marks
inside the unit.

3. Close the battery cover.

Note: Replace the batteries when the TV set is showing

the following symptoms:
Operation is unsteady or erratic, sometimes the TV set
does not work with transmitter.
Discharged batteries may leak and damage the unit. The
normal life of batteries should be from nine to ten months.

Battery Cover

Battery installation of the Remote Control Transmitter

Note : When RC button is pressed, the power indicator will blink in yellow light.

BASS EXPANDER

TIMER

TIMER

POWER ON/OFF

14

23

TV/AV

SOUND MUTE

TV/AV Selector

The selected mode will switch
alternately between TV mode
and AV mode each time the
TV/AV Selector is pressed.

Programme
Selector

BASS

STEREO/MONO

PROGRAMME UP

VOLUME

PROGRAMME DOWN

MENU

6

9

0

7

-/--

85

Digit

RECALL /
COLOUR SYSTEM

BASS

A B

SURROUND

SURROUND

P▲

PP

ALTERNATE

CH SCAN

-

P▼

SWAP

CHANNEL SCAN

SWAP

MENU

PIC MODE

PICTURE MODE

VOLUME

JXMYA

+

7

General Operation

To switch on or off the TV ;

Press the Mains ON/OFF button.
The power of the TV is turned on or off com­pletely. If no picture appears but the
Standby and Power indicator illuminates,
press the Power ON/OFF button of the
remote control transmitter as the TV set is in
standby mode.

To set the TV to standby mode;

Press the Power ON/OFF button.
During Standby mode the Standby and
Power indicator illuminates more brightly.

To turn on the TV from the standby
mode, press any of the following button.

● Power ON/OFF button of the remote

control transmitter.

● Programme UP/DOWN of the remote

control transmitter or the TV set.

● 1 to 9, 0 button on the remote control

transmitter.

Important !

Be sure to set the Mains ON/OFF switch to
the off position, if the power failure occurs
while viewing.

This TV set incorporates the AUTO SHUT
OFF function. Even if the TV is left on after
you have gone to sleep, the TV set changes
to the standby mode within 10 minutes after
all broadcasts have ended.

OFF 0:10

Press the Programme UP (P▲ ) button to

select the next programme position.

Press the Programme DOWN (P▼ ) button

to select the previous programme position.

Channel Scanning

Press the CHANNEL SCAN button to
search for a programme. The channel posi­tions are automatically scanned, and the
channel scanning will stop at the position
where it began. To stop at the position you
want, press this button again.

Power ON/OFF

Auto Shut Off Function

Direct Programme Selection

Programme Up and Down

CH SCAN

2

5

-/--

To select programme position 8;

8

- -

27

2 -

Press “8” button.

- -

Example

8

Press the Digit button twice. Press “2”button. Press “5”button.

To select programme position 125;

To select programme position 255;

Press the Digit button 3 times. Press “5” button.
Press “5”button.

-/--

12 -

125

1--

27

To select programme position 27;

-/--

5

5

-/--

-/--

25 -

255

2--

-/--

Press the Digit button. Press “2”button. Press “7” button.

TIMER

1423

TV/AV

7

8

9

10

11

Should you wish to mute the sound (e.g.
While talking on the telephone), press the
SOUND MUTE button.
To switch the sound back on, press the
SOUND MUTE button again or VOL +/-.

Picture mode that is
gentle on the eyes.
Perfect for TV game due
to subdued colour and
soft contrast.

8

To display the on screen indications, press
the RECALL/COLOUR SYSTEM button.

Press the ALTERNATE button, and the
programme position will alternately select
the previous position and the present
position.

Screen display disappears after about 5
seconds.

Quick Picture Controls

Picture Settings are set
to your preference.
(Refer to page 11.)

Press the PICTURE MODE button to select
the following picture modes; “PERSONAL”,
”DYNAMIC”, ”NATURAL”, “ECO” and
“GAME”. Select picture modes to suit pic­ture type you are watching.

Each time the PICTURE MODE button is
pressed, picture settings changes as follows;

Emphasize very vibrant
colours.(Suitable for AV
mode in brightly-lit room
condition)

Emphasize original
colours.

PERSONAL

GAME

ECO

DYNAMIC

NATURAL

Low power mode.

29

AUTO

OFF 0:30
ON 3:30 6

Off Timer

General Operation

On Timer

Programme
Position

Volume Control

RECALL

Sound Mute

ALTERNATE

BG

Sound
System

Colour
System

Increase or decrease the sound volume level
by pressing the VOLUME (+ or -) buttons.

To get a emphasis bass sound, press the

BASS button.

Bass Expander

BASS EXPANDER ON

SURROUND ON

Surround ON/OFF

OFF

Press the SURROUND button to enjoy
Surround sound.

OFF

NOTE : When the STEREO audio channel is
selected in the AV mode, surround mode is
changed as follows;”SURROUND1”, ”SUR­ROUND 2” and “SURROUND OFF”.
“SURROUND 1” is normal surround mode.
Selection of “SURROUND 2” obtains a deeper
surround effect.

BASS EXPANDER ON
SOUND

BASS EXPANDER ON
SOUND MUTE

4

2

■ If no operation is performed after the TV has

been switched on by the ON TIMER, such as if
you are not at home, the TV will be automati­cally switched off after approximately 2 hours.

■ If the TV is already switched on when the time

set for the ON TIMER has been reached, only
the programme position will be changed to the
set programme position.

■ Cancelling ON TIMER

To cancel the ON TIMER, press the VOLUME
( + or - ) button to set it to “ON 0:00” while the
ON TIMER screen is shown.
Switching off the TV by pressing the Mains
ON/OFF button will also cancel the ON TIMER
settings.

9

■ The OFF TIMER cancels when the TV set is

turned off or if a power failure occurs.

OFF TIMER

The OFF TIMER will switch off the TV auto­matically after 30 minutes, 1 hour, 1 hour
and 30minutes, or 2 hours.

1

Press the TIMER button.

2

Press the VOLUME ( + or - ) button to

select the time period.

OFF 0:00

(OFF TIMER setting mode)

Each time the TIMER button is pressed,
timer function is changed as follows;

OFF 0:00

(Off Timer)

(Display Off)

(On Timer)

■ Just one minute before switching off the TV,

“OFF 0:01” will be display on the screen.

■ To cancel the OFF TIMER, select “OFF 0:00”

by pressing the VOLUME (+ or - ) button.

When the ON TIMER is set. TV will auto­matically be switched on to the selected
programme position when the specified time
has elapsed.

Setting programme position for when

TV is switched on by ON TIMER

1

Press the TIMER button twice.

(ON TIMER setting
mode)

ON 0:00 2

2

Press the VOLUME ( + or - ) button.

The set time will be increased or
decreased by 10 minutes each time
the button is pressed ; the maximum
time which can be set is 24 hours.
When the ON-TIMER has been set,
the colour of Standby and Power
Indicator changes to yellow.

Programme position for when TV
is switched on by ON TIMER.

To set programme position to between 0
and 9, press the desired number button “0”

- “9” while the ON TIMER screen is shown.

For example, to set programme position 26,
press the Digit button, “2” button then “6”
button while the ON TIMER screen is shown.

ON 3:30 9

ON 3:30 26

General Operation

It is also possible to set the programme
position by pressing the PROGRAMME UP
or DOWN button.

To set an AV position for when the TV is
switched on by the ON TIMER, press the
TV/AV Selector while the ON TIMER
screen is shown to select position AV.

ON 3:30 2

ON 3:30 AV

ON TIMER

ON 0:00 2

10

To select sound system

1) Select “SIF” with the PROGRAMME UP
or DOWN button in the Semi-auto or
Manual Tuning mode.

2) Press the VOLUME ( + or

-

) button to

select a optimum sound system.

Colour and Sound System

Normally, set the colour system to “AUTO”,
if the clear picture cannot be obtained even
when the broadcasting or AV signal is
received, press the RECALL/ COLOUR
SYSTEM button repeatedly until the
optimum image can be produced.

(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)

Note: A colour system entry to the memory
cannot be made during TV mode, make it
during Semi-auto or manual tuning mode.
(Refer to page 14.)

6

AUTO

6

PAL

6

NTSC4.43

6

NTSC

To select the sound system, make it during
Semi-Auto Tuning or Manual Tuning mode.
(For further details concerning this operation
refer to page 14.)
When the sound is not clear or no sound is
produced on a programme number position,
select sound system repeatedly until the
optimum sound is obtained.

(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of

Sound System.)

BG

(5.5MHz)

DK

(6.5MHz)

I

(6.0MHz)

M

(4.5MHz)

3) To enter a sound system selection into
the memory, select “MEMORY” and press
the VOLUME + or

-

button.

(Semi-Auto or Manual Tuning mode )

Each time the RECALL/ COLOUR
SYSTEM button is pressed, colour
system changes as follows;

Setting of the Colour System

Setting of the Sound System

Broadcast Transmission System List

Area

Country

Sound

System

Colour

System

Middle

East

Asia

Oceania

PAL

B/G

Australia,
New Zealand, etc.

Union of Arab Emirates,
Kuwait, Oman, Qatar,
Yemen,

Bahrain,

etc.

Indonesia, Malaysia,
Singapore, Thailand,

etc.

PAL

B/G

China,

etc.

PAL

D/K

Hong kong

PAL

I

Saudi Arabia,
Iraq, Iran, Lebanon,etc.

B/G

SECAM

Russian Federation,etc.

D/K

SECAM

Myanmar, etc.

M

NTSC

MODE
SEARCH
POSITION
SYSTEM

SIF

SKIP
MEMORY

SELECT ADJUST BACK

SEMI
START

2

AUTO

BG

OFF

--

P

P

M

EXIT

MODE
SEARCH
POSITION
SYSTEM
SIF
SKIP

MEMORY

SEMI
START
2
AUTO
DK
OFF

OK

P

SELECT ADJUST BACK

M

P

EXIT

Approximately five seconds after you
release the VOLUME (+ / -) button, the
screen display switches from the adjustment
screen to the normal TV screen.To return to
the Picture adjustment menu, press the
ALTERNATE button within five seconds of
releasing the VOLUME (+ /

-

) button.

2

When “PICTURE” is not selected, select

“PICTURE” with the Programme UP or

DOWN button.

Picture Adjustment

Picture Adjustment Menu

PERSONAL

Note:

The picture adjustment data (Colour, Brightness,
Contrast, Tint and Sharpness) is automatically
stored in PERSONAL mode of the Quick Picture
Controls (See page 8). These settings will be
used when PERSONAL mode is selected.

1

Press the MENU button for MAIN

menu display.

Basic picture adjustment operation

4

Select desired control by pressing the

Programme UP or DOWN button.

(MAIN MENU)

3

Press the VOLUME + or-button to

display Picture Adjustment menu.

5

Press the VOLUME + or-button to

alter settings.

■ To return to Main menu, press the

ALTERNATE button.

■ To return to the normal TV mode, press the

MENU button. ( Or will automatically return to
the normal TV mode after 20 seconds.)

11

Picture Adjustment Item
COLOUR : Adjusts colour intensity.

BRIGHT : Adjusts picture brightness.
CONTRAST : Adjusts picture contrast.
TINT : Adjust colour tints. (Displayed only on

NTSC or NTSC4.43 system signal reception.)

WHITE TONE : Adjusts white balance.
SHARPNESS : Adjusts picture detail.
FINE TUNING : Fine tuning in case of weeek

broadcast signal or poor reception. Only displayed
in TV mode. Will not be displayed in AV mode.

Note: The second page is not displayed

when there is no TINT adjustment.

Page.1

Page.2

COLOUR

BRIGHT
CONTRAST
TINT
SHARPNESS

SELECT ADJUST BACK

WHITE TONE

FINE TUNING

P

P

M

EXIT

SELECT ADJUST BACK

P
M

PICTURE

AUDIO
PRESET
LANGUAGE
GAME

P

EXIT

COLOUR

BRIGHT
CONTRAST
TINT
SHARPNESS

P

SELECT ADJUST BACK

M

P

EXIT

PICTURE

AUDIO
PRESET
LANGUAGE

GAME

SELECT ENTER

M

EXIT

COLOUR

BRIGHT

CONTRAST
TINT
SHARPNESS

P

SELECT ADJUST BACK

M

P

EXIT

BRIGHT

P

ADJUST BACK

P

M

EXIT

12

4

Select desired control by pressing the

Progamme UP or DOWN button.

Audio Adjustment

1

Press the MENU button for MAIN menu

display.

2

Select “AUDIO “ by pressing the

Programme UP or DOWN button.

Audio adjustment operation

3

Press the VOLUME + or-button for
Audio Adjustment menu display.

■ To return to Main menu, press the

ALTERNATE button.

■ To return to normal TV mode, press the

MENU button. (Or will automatically return
to normal TV mode after 20 seconds.)

Audio adjustment Menu

Audio Adjustment Item

BASS :Bass Adjustment
TREBLE :Treble Adjustment

BALANCE :Left/right speaker volume

balance adjustment
BASS EXPANDER : Operate BASS
EXPANDER on and off
SURROUND :Operates SURROUND
on and off.

5

Press the VOLUME + or - button to

alter settings.

6

When adjustment is completed, press

the MENU button to return to normal
TV display. (Or will automatically return
to TV display after 20 seconds.)

Approximately 20 seconds after you release
the VOLUME (+ / -) button, the screen dis­play switches from the adjustment screen to
the normal TV screen.
To return to the MAIN menu, press the
ALTERNATE button within 20 seconds of
releasing the VOLUME (+ /

-

) button.

BASS

TREBLE
BALANCE
BASS EXPANDER OFF
SURROUND OFF

P

SELECT ADJUST BACK

P

M

EXIT

BASS

TREBLE
BALANCE
BASS EXPANDER OFF
SURROUND OFF

P

SELECT ADJUST BACK

M

P

EXIT

BASS

TREBLE

BALANCE
BASS EXPANDER OFF
SURROUND OFF

PICTURE

AUDIO

PRESET

LANGUAGE

GAME

SELECT ENTER

M

PICTURE

AUDIO

PRESET

LANGUAGE

GAME

SELECT ENTER

M

EXIT

EXIT

P

SELECT ADJUST BACK

M

P

EXIT

BASS

TREBLE

BALANCE
BASS EXPANDER OFF
SURROUND OFF

P

SELECT ADJUST BACK

M

P

EXIT

Normally, set the colour system to “AUTO”,
if the clear picture cannot be obtained,
change the colour system until the optimum
image can be produced.

5

Press the VOLUME (+) button to start
channel tuning.

1

4

Select “SEARCH” by pressing the

Programme UP or DOWN button.

To select colour system

1) Select SYSTEM with the PROGRAMME
UP or DOWN button.

2) Press the VOLUME ( + or -) button to
select a optimum colour system.

SEARCH
POSITION

SYSTEM

MODE

SIF

AUTO
START
1

AUTO

BG

B/G

(5.5MHz)

D/K

(6.5MHz)

I

(6.0MHz)

M

(4.5MHz)

When the sound is not clear or no sound is
produced on a programme number position,
change the sound system.

To select sound system

1) Select SIF with the Progamme UP or
DOWN button.

2) Press the VOLUME ( + or -) button to
select an optimum sound system.

SEARCH
POSITION
SYSTEM

MODE

SIF

AUTO
START
1

AUTO

BG

AUTO

PAL

NTSC4.43

NTSC

(Refer to Broadcast Transmission System List
indicated by page 10 in a setup of sound system.)

(Refer to Broadcast Transmission System List
indicated by page 10 in a setup of colour system.)

Up to 256 broadcast stations in your
reception area can be stored in the
electronic memory.

There are three ways of tuning as follows;

1. Automatic Tuning (the basic way):

All receivable channels are automatically tuned
in and memorized in consecutive programme
position.

2. Semi-Auto Tuning:

Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.

3. Manual Tuning:

Manually tune a channel if it cannot be auto­matically tuned, such as when the signal is
poor.

1

Press the MENU button for MAIN menu

display.

2

Select “PRESET” by pressing the

Programme UP or DOWN button.

3

Press the VOLUME + or-button for
PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.

Automatic Tuning

Tuning of the Channels

After all receivable channels have been found
and stored, the TV set automatically returns
to programme position “1”.

■ The Automatic Tuning operation can be

cancelled at any time by pressing the

Programme UP or DOWN button.

13

PICTURE

AUDIO
PRESET
LANGUAGE
GAME

SELECT ENTER

M

EXIT

PICTURE
AUDIO

PRESET

LANGUAGE
GAME

MODE

SEARCH
POSITION
SYSTEM
SIF

AUTO

START
1
AUTO
BG

MODE

SEARCH

POSITION
SYSTEM
SIF

AUTO

START

1
AUTO
BG

P▲

P▼

14

1

Press the MENU button for MAIN
menu display.

2

Select “PRESET” by pressing the

Programme UP or DOWN button.

3

Press the VOLUME + or-button for

PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.

4

Select “SEMI” or “MANUAL” by press

ing the VOLUME + or-button.

Semi-Auto Tuning Mode

Semi-Auto Tuning and Manual Tuning

If it is required, Change the colour and
sound system. To enter the colour and
sound system into memory, select
“MEMORY” and press the VOLUME + or

-

button.

Manual Tuning Mode

Tuning of the Channels

For example, to enter Programme Position 27,
press the Digit button, press the remote control
button 2 followed by 7. It is also possible to select
the Programme position number by pressing
either of the VOLUME + or -button. In this case,
select “POSITION” with the Progamme UP OR

DOWN button first, then press the VOLUME + or

- button.(Pressing the VOLUME + or

-

button will

only alter the programme position number.)

5

For example, to pre-set a required
channel onto Programme Position 6,
select “POSITION” with the
Programme UP or DOWN button and
press remote control button number 6
and enter 6. (In this case, the channel
being watched will change to channel

6.)

7

Once desired channel is located, select
“MEMORY” by pressing the
Programme UP or DOWN button.

The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME

-

button will move tuning toward the lower
frequencies.

6

Select “SEARCH” by pressing the

Programme UP or DOWN button.

Semi-Auto Tuning:

Press and release the VOLUME + or

-

button
to search for required TV station. Once a
station is located, tuning will automatically
stop. Continue till desired channel is located.

Manual Tuning :

Press and hold the VOLUME + or - button to
search for required TV station.

8

Press the VOLUME + or-button to
enter the desired channel into
Programme Position 6.

9

Press the MENU button to return to
normal TV display.

To pre-set other Programme Positions, repeat
steps 5-8.

PICTURE
AUDIO

PRESET

LANGUAGE
GAME

MODE

SEARCH
POSITION
SYSTEM

SIF

SKIP

MEMORY

SEMI

START
1
AUTO
BG
OFF

--

SKIP

MEMORY

SELECT ADJUST BACK

MODE
SEARCH

POSITION

SYSTEM
SIF

MODE

SEARCH
POSITION
SYSTEM
SIF
SKIP

OFF

OK

P

P

M

EXIT

SEMI
START

6

AUTO

BG

MANUAL

START
1
AUTO
BG
OFF

--

MODE

SEARCH

POSITION
SYSTEM
SIF

SEMI

START

6

AUTO

BG

MODE

SEARCH

POSITION
SYSTEM
SIF

SEMI

6

AUTO

BG

MODE

SEARCH

POSITION
SYSTEM
SIF

MANUAL

6

AUTO
BG

SKIP

MEMORY

SELECT ADJUST BACK

OFF

OK

P
M

P

EXIT

15

The two TV channels will now have
changed places.

Use this channel swapping feature to swap the
channels between two stored programme
position. This feature is particularly useful after
automatic tuning.

1

Select programme position “6” .

2

Press the SWAP button.

For example, to swap the channel between
programme position “6” and programme
position “12”.

6

12

6

SWAP 6 AND

-

3

Press the Digit button first , “ 1 “ button
and then “ 2 ” button on the remote
control to enter programme number 12.
(For example, to enter programme
number “ 3 “, press “ 3 ” button only. )

SWAP 6 AND 12

6

SWAPPING

6

12

4

Press the SWAP button.

2

Enter to SEMI-AUTO or MANUAL
tuning mode.

(Refer to page 13.)

3

Select “POSITION” with the
Programme UP or DOWN button.

This function can be utilized after Automatic
Tuning.

For example, to copy a TV channel on
programme position “2” onto programme
position “6”;

1

Select programme position “2” .

2

4

Select position “6” with the VOLUME +
or

-

button.

Channel Copy

5

Select “MEMORY” by pressing the

PROGRAMME UP or DOWN button.

7

Press the MENU button to return to
normal TV display.

6

Press the VOLUME + or-button to
memorize.

Tuning of the Channels

Channel Swapping

MODE
SEARCH

POSITION

SYSTEM
SIF
SKIP
MEMORY

MODE
SEARCH

POSITION

SYSTEM
SIF
SKIP
MEMORY

SEMI
START

2

AUTO
BG
OFF

--

SEMI
START

6

AUTO
BG
OFF

--

MODE
SEARCH
POSITION
SYSTEM
SIF
SKIP

MEMORY

SEMI

START

6

AUTO
BG
OFF

OK

16

6

Press the MENU button to return to
normal TV display.

1

Enter to SEMI-AUTO or MANUAL
tuning mode. (Refer to page 13.)

2

Select “POSITION” with the
PROGRAMME UP or DOWN button.

When there is a position you do not use, Position 4
for example, by setting the SKIP Channel function
it is possible to jump over this position, when you
are selecting a channel using the PROGRAMME

UP/DOWN or CHANNEL SCAN button.

3

4

5

Skip

For example, to set programme position
“4” as Skip channel ;

4

Select “SKIP” by pressing the

PROGRAMME UP or DOWN button,
then press the VOLUME + or

-

button
to set SKIP to ON. To cancel Skip
Channel function, set to OFF.

3

Press remote control “4” button to

select Programme Position 4.

Use the Digit button and PROGRAMME
SELECTOR (Number buttons) to enter
Programme Number. Do not use the VOLUME +
or

-

button to enter programme position in this

settings.

5

Select “MEMORY” by pressing the

PROGRAMME UP or DOWN button,
then press the VOLUME + or-button
for memory.

Any number of channels maybe set as Skip
Channels.

Skip Channel Set and Cancel

Tuning of the Channels

MODE
SEARCH

POSITION

SYSTEM
SIF
SKIP

MEMORY

SEMI

START

6

AUTO
BG
OFF

--

MODE
SEARCH
POSITION
SYSTEM
SIF

SKIP

MEMORY

SELECT ADJUST BACK

SEMI
START

4

AUTO
BG

ON

--

P
M

P

EXIT

MODE
SEARCH
POSITION
SYSTEM
SIF
SKIP

MEMORY

SEMI
START

4

AUTO
BG
ON

OK

P

SELECT ADJUST BACK

M

P

EXIT

MODE
SEARCH

POSITION

SYSTEM
SIF
SKIP

MEMORY

SELECT ADJUST BACK

SEMI
START

4

AUTO
BG
OFF

--

P
M

P

EXIT

P

SELECT ADJUST BACK

M

P

EXIT

17

The private position is now cancelled.

1

Select private position (In this case
position “15”).

2

Press and hold the RECALL/COLOUR
SYSTEM button for more than 2

seconds.

X15

3

Press the RECALL/COLOUR button
for watching a TV programme.

X15

1

Select private position (position “15”).

2

Press and hold the RECALL/COLOUR
SYSTEM button for more than 2

seconds.

X15

X15

Note: The position “15” is still in the private

position.

3

Press the MENU button .

For example, to set the programme position
“15” as the private position.

1

Select programme position “15”.

15

2

Press and hold the RECALL/COLOUR
SYSTEM button for more than 2

seconds.

15

The programme number “15” will shift to
centre of the screen.

15

AUTO

The picture will disappear, and “X 15” will be
display on the screen.

The private position setting is now
completed.

3

Press the MENU button.

X15

AUTO

Private position is used to restrict of pro­gramme positions that you do not want
others to watch.
Any position can be set as the Private
position.

How to set the Private Position

To view a programme on Private Position

Cancelling of the private position

Setting of the Private Position

BG

BG

15

AUTO

BG

15

AUTO

BG

18

FRENCH

.

.

.

To sets FRENCH language on screen :

Select “FRANCAIS” by pressing the

Progamme

UP or DOWN button. To return

to the normal TV mode, press the MENU
button.

To sets INDONESIAN language on screen :

Select “BAHASA INDONESIA” by pressing the

Progamme

UP or DOWN button. To return to

the normal TV mode, press the MENU
button.

.

.

.

INDONESIAN

ENGLISH

1

Press the MENU button for MAIN menu

display.

2

Select “LANGUAGE “ by pressing the

Programme UP or DOWN button.

3

Press the VOLUME + or-button for
Language menu display.

To sets ENGLISH language on screen :

Select “ENGLISH” by pressing the

Progamme

UP or DOWN button. To return to

the normal TV mode, press the MENU
button.

THAILAND

To sets THAILAND language on screen :

Select “ ” by pressing the

Progamme

UP or DOWN button. To return

to the normal TV mode, press the MENU
button.

ARABIC

To sets ARABIC language on screen :

Select “ ” by pressing the

Progamme

UP or DOWN button. To return

to the normal TV mode, press the MENU
button.

.

.

.

RUSSIA

To sets RUSSIA language on screen :

Select “ ” by pressing the

Progamme

UP or DOWN button. To return

to the normal TV mode, press the MENU
button.

P

y

C

C

NN

Setting of the language OSD (On Screen Display)

PICTURE

AUDIO
PRESET
LANGUAGE
GAME

PICTURE
AUDIO
PRESET

LANGUAGE

GAME

ENGLISH

.

.

.

y

C

P

NN

C

FRANCAIS

BAHASA

INDONESIA

P

SELECT BACK

P

M

EXIT

.

.

.

y

C

P

NN

C

FRANCAIS

BAHASA

INDONESIA

..

.

.

P

P

.

.

.

.

M

.

y

C

P

NN

C

FRANCAIS

BAHASA

INDONESIA

P

P

P

I

B

PAT

P

P

3

A

A

H

M

BPINNT

.

.

.

y

C

P

NN

C

FRANCAIS

BAHASA

INDONESIA

P

P

M

FRANCAIS

BAHASA

INDONESIA

P

CHOISISSEZ

P

RETOUR

M

QUITTEZ

BAHASA

INDONESIA

PILIH

KEMBALI

P

P

M

KELUAR

19

GAME (Air Tennis)

1

Press the MENU button for MAIN menu

display.

2

Select “GAME“ by pressing the

Programme UP or DOWN button, then
press the

VOLUME

+ or - button.

3

To return to the normal TV mode,
press the MENU button.

HOW TO PLAY

When play starts the ball move from upside
to downside. User have to reflect the ball to
upside (enemy-side). If user miss, the
enemy score 1 point.
User get 5 points, the stage is clear.
Then Game level will be increase. ( Level
0 - 9).
But when the enemy score 5 points, the

Game is over.

Available Key in Game

[VOLUME +/-] button : Right/Left action
[MENU] button : Exit from Game
[ALTERNATE] button : Restart from

Game over

User Bar

Ball

Note : Picture mode will become game

mode automatically when Game
menu is selected.

Enemy

Your score

Enemy score

SCORE O-3
LEVEL 8

Note: When the Menu Game is selected,

the TV sound is still heared.

PICTURE

AUDIO

PRESET
LANGUAGE

GAME

SELECT ENTER

M

EXIT

PICTURE

AUDIO
PRESET
LANGUAGE

GAME

SELECT ENTER

M

EXIT

SCORE

0-3

LEVEL

8

SCORE

0-5

LEVEL

0

GAME OVER

20

Note: When signals are input both to the Front AV Input Jacks and to the Rear AV Input

Jacks, the signal input to the Front AV Input Jacks takes priority.

INPUT

OUTPUT

A
U
D

I

O

V

I
D
E
O

R

L

AN T.75

Ω

It is convenient to use the AV input jack on the front panel for equipment that is often con­nected and disconnected.

VCR for playback

(Stereo)

Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of
this TV set . Tapes and discs can be played back.

PLAYBACK

■ To watch video input picture, select AV position

by pressing the TV/AV Selector.

AV

(Stereo)

Video Camera,

TV Game etc.

To video and audio outputs

To video and
audio outputs

PLAYBACK

(Stereo)

Connecting to the AV Input Jacks

Connecting to the Front AV Input Jacks

When the audio signal from the VCR is stereo, be sure to connect the right and left channels
to the respective right and left AUDIO IN terminals. Then select “STEREO (AV)” channel of
the audio channel in the TV set with the remote control button.

If the external audio signal is a monaural one in this connection,
select “MONO (L)”or “MONO (R)” channel of the audio channel
in the TV set with the remote control button.

Connecting to the Rear AV Input Jacks

Connecting other Equipment

A B

A B

STEREO (AV)

MONO (L)

MONO (R)

Each time the button is pressed, the AV Stereo mode is changed as follow,

A B

MONO

+ +

VIDEO

L-AUDIO-R

21

■ To dub video from the AV terminal input, select AV

position by pressing the TV/AV Selector.

The picture signal being displayed on the TV screen is output through the Monitor Output
Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV input ter­minals.

■ To record TV programme, select TV mode

by pressing the TV/AV Selector and
record the desired programme.

Colour system setting for AV position is automatically stored in the memory.

Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed
as follow;

Depending on the type of video tape or connected AV equipment being used, it may be nec­essary to select colour system. In this case, press the RECALL/COLOUR SYSTEM button
and select a suitable colour system.

TV mode

AV

15

Selecting the Colour System in AV mode

Connecting to the Monitor Output Jacks

Note: The audio left channel and right channel which were inputted from AV

Input Jacks are mixed, and are outputted from Audio Monitor Output Jack.

■ You can select a TV programme while watching a playback from a VCR

For example:

● To select programme position “9” while watching a playback from external VCR, press “9”

button of the remote control. The TV set returns to the TV mode and programme “9” will
be selected.

● To select the programme position “26”, press Digit (--/-) button, “2” then “6” button. Then

TV set returns to the TV mode and programme position “26” will be selected.

Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote

control or the TV will return the TV to the TV mode.

Connecting other Equipment

AV

AUTO

AV

PAL

AV

NTSC4.43

AV

NTSC

Recording TV broadcasts or tape dubbing

VCR for recording

INPUT

OUTPUT

A
U
D

I
O

V

I
D
E
O

R

L

AN T.75

Ω

To video and audio inputs

MONO

+ +

22

Power Source AC110-240 Volts, 50/60Hz

Colour System PAL/NTSC4.43/NTSC

/PAL-60Hz

Sound System B/G, I, D/KK’, M/M

Channel Coverage

Australia
VHF: 0-11, 5A (Australlia) 1-11 (New Zeland)E2­E12, R1-R12, K1-K9, A2-A13, , J1-J12
UHF: 21-69, A14-A69, J13-J62
CATV: S1

-

S41, X, Y, Z, Z+1, Z+2

Aerial input impedance 75 Ω

Audio output (RMS) 5W + 5W (All models)

Speakers Model CP21MF2: ø 8 cm x 2 pcs.

Model CP14KX2(A), CP21KX2(A):
6 cm x 12 cm x 2 pcs.

Ext. terminals

Video inputs: Phone Jack x 2

(1.0Vp-p, impedance 75 Ω)

Audio inputs: Phone Jack (L/R) x 2

(436mVrms, impedance

more than 40KΩ)

Video monitor outputs: Phone Jack x 1

(1.0Vp-p, impedance 75 Ω)

Audio monitor outputs: Phone Jack (L/R) x 1

(436mVrms, impedance less than 600Ω)

Dimension

Model CP21MF2: 496 (W) x 470 (H) x 482 (D) mm
Model CP14KX2(A): 491 (W) x 337 (H) x 387 (D) mm
Model CP21KX2(A): 625 9W) x 461 (H) x 484 (D) mm

Weight

Model CP21MF2: approx. 21.0 Kg
Model CP14KX2(A): approx. 9.9 Kg
Model CP21KX2(A): approx. 21.2 Kg

Specifications subject to change without notice.

Connecting other Equipment

The surface of the cabinet can be damaged
if not properly maintained. Many common
household aerosol sprays, cleaning agents,
solvents and polishes will cause permanent
damage to the fine surface.

1. Unplug the power cord before cleaning
the Television.

2. Clean the screen with a soft cloth

dampened with glass cleaner or warm
water.

3. Clean the cabinet with a soft cloth

dampened with a mild household deter­gent and warm water. Dry thoroughly.

Note: NEVER spray liquids on the screen

because they can run down and drip
onto the chassis. This may cause
component failure not covered under
Warranty.

Aerial Socket

PLAYBACK

The AV apparatus can also be connected to
the aerial socket of your TV receiver.

Presetting to watch the video input

1. Playback the VCR .

2. Tune a VCR playback in programme

position that you want. (See Semi-Auto
Tuning and Manual Tuning on pages 14.)

For further details concerning this connection
and adjustment, refer to the operating instruc­tions for the AV equipment.

Specifications

VCR for playback

AV Connection to the Aerial Socket

Care and Cleaning

ANT. 75Ω

23

Helpful Hints - Problems/Solutions

Before requesting service check the following chart.

“GHOSTS”

Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”.
These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one
suited for your area.

“INTERFERENCE”

Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be
a temporary condition, but should this interference persist, contact your dealer.

The following faults are not caused by the receiver:

● Check aerial connection on back of TV set.

● Check aerial for broken wires. ● Re-orient aerial.

Problem: Check these Conditions / Try these solutions:

● Check if TV is plugged in.

● Try a different channel, if OK, probably station trouble.

No picture,
no sound

● Adjust Brightness or Contrast control.

● Adjust Fine Tuning. (See page 11.) ● Check aerial connection.

Poor picture,
sound OK

No colour,
Picture OK

● Adjust Colour or Tint control. ●Adjust Fine Tuning. (See page 11.)

●

Check aerial connection.● Is the programme in colour ? Try a different channel.

● Select other colour system. (See Setting of the Colour System on page 10.)

Weak picture

No sound or poor
sound.

●

Sound Mute may be on. Press the

SOUND MUTE

button on the remote control.

● Adjust Volume. ●

May be station trouble. Try a different channel.

● Select other sound system. (See Setting of the Sound System on page 10.)

Remote Control
will not work.

● Check batteries. Replace batteries.

● Check if TV set is plugged in. Aim remote control towards front of TV.

Cannot select or
scan some channels.

● Channel may be removed from memory. Add channel to memory manually.

(See “Skip Channel Set and Cancel” on page 16.)

● Check aerial connection.

● This is a normal condition during warm-up and cool down of the plastic

cabinet parts.

Blue screen with AV
is displayed

● Check AV connection. Press the TV/AV Selection button.

● Check external equipment. Switch on external equipment.

● Check to see if channel is set as the Private Position. See “Setting of the

Private Position” on page 17.

Black screen with X
and programme
position displayed.

Cabinet makes
popping sound.

SANYO ELECTRIC Co., Ltd.

Part No. 1AA6P1P4239-A C5ZY-A (AC5-G1)

Printed in Indonesia.