Sanyo CLT-2422, CLT-2418 User Manual
Important
Charge the handset battery for 12 continuous hours prior
to first use.
2.4 GHz
Cordless Telephone
with Caller ID
Instruction Manual
CLT-2418
CLT-2422
SANYO Canada Inc.
www.sanyocanada.com
CLT-2422E-NEW 7/16/02 9:08 AM Page 1
MUTE key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Low battery warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VOICE MAIL/IN USE indicator . . . . . . . . . . . . . . . . . . . . . . . . 21
CALLER ID FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Caller ID with Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Caller ID list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reviewing Caller ID list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Storing Caller ID entries in the directory . . . . . . . . . . . . . . . . 23
Dialing a Caller ID number . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Deleting entries from the Caller ID list . . . . . . . . . . . . . . . . . 24
DIRECTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Storing a name/number in the directory . . . . . . . . . . . . . . . . 25
Inserting a pause in the dialing sequence . . . . . . . . . . . . . . .26
Replacing a directory entry with a Caller ID entry . . . . . . . . 26
Changing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Making calls from the directory . . . . . . . . . . . . . . . . . . . . . . 26
Reviewing and deleting directory contents . . . . . . . . . . . . . . 27
Chain-dialing from the directory . . . . . . . . . . . . . . . . . . . . . . 27
CHANGING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
RECYCLING NICKEL-METAL HYDRIDE BATTERIES . . . . . . . . . . . 29
POWER FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
HEADSET JACK AND BELT CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Headset connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Belt clip installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LCD SCREEN MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SOUND SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
MAXIMIZE BATTERY PERFORMANCE . . . . . . . . . . . . . . . . . . . . . .34
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
SANYO COMFORT WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SOS HELP LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3
TABLE OF CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Checking package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Modular jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Battery setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Telephone line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tone/pulse setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Mounting on a wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Digital Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NAMES AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INITIAL PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Ringer tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Resetting to default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ringer switch and volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Speakerphone use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Pre-dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing the pre-dial number . . . . . . . . . . . . . . . . . . . . . . . 16
Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching between speaker phone and handset . . . . . . . . . 16
Intercom and room monitoring . . . . . . . . . . . . . . . . . . . . . . . 17
Using intercom while you are on a call . . . . . . . . . . . . . . . . 18
Conference calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Conferencing after intercom conversation . . . . . . . . . . . . . . 19
FLASH key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CHAN (Channel) key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HOLD key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CANCEL key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
TONE key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Handset locator (PAGE key) . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2
TABLE OF CONTENTS
The exclamation point within the triangle is a warning sign
alerting you of important instructions accompanying the product.
CLT-2422E-NEW 7/16/02 9:08 AM Page 2
GETTING STARTED
Checking the package contents
Make sure your package includes the items shown here.
Modular jack
You need an RJ11 type modular phone jack. If you do not have a
modular jack, call your local phone company to find out how to get
one installed.
Installation tips
Some cordless telephones operate at frequencies that may cause
interference to nearby TVs microwave ovens, and VCRs. To minimize or
prevent such interference, the base of the cordless telephone should
not be placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away from
these appliances.
Certain other communications devices may also use the 2.4 GHz
frequency for communication and if not set properly these devices may
interfere with each other and/or your new telephone. If you are
concerned with interference, please refer to the owner’s manual for
these devices on how to properly set channels to avoid interference.
Typical devices that may use the 2.4 GHz frequency for communication
include wireless audio/video senders, wireless computer networks,
multi-handset cordless telephone systems, and some long-range
cordless telephone systems.
5
INTRODUCTION
Congratulations on your purchase of this Sanyo cordless telephone.
Your Sanyo 2.4 GHz cordless telephone is a fine-quality home
communications product. It is carefully designed and produced by a
world leader of consumer and industrial electronics equipment. With
proper maintenance and care, it will provide you with years of
enjoyment and convenience.
Main Features
2.4 GHz Technology
Superior Range -The use of 2.4 GHz frequency band for signal
transmission between base and handset means greater communication range compared to conventional 43 – 49 MHz cordless
telephones.
Ultra-Low Noise -The high frequency communication has also significantly reduced noise level.
40-Channel Auto Scan -Your new telephone uses one of 40 channels
in the 2.4-GHz frequency band. It automatically selects a clear channel
every time you receive or place a call on the handset.
COMPANDER PLUS Noise Reduction
This fourth generation of the Sanyo’s original noise reduction
technology now filters out more background noise.
• Caller ID on Handset and base
• Speakerphone and dialing keypad on the base
• Compatible with Caller ID and Visual Call Waiting
• 40 name/number caller ID list: name/number, time and date
• 3-line trilingual display with backlit LCD screen
• Lighted handset keypad (CLT-2422 only)
• Dial back from Caller ID list
IMPORTANT: To use all of the features of this telephone, you must subscribe
to either the standard Name/Number Caller ID Service or Caller ID with Call
Waiting Service from your telephone company. To know who is calling
while you are on the phone, you must subscribe to Caller ID with Call
Waiting Service.
4
Replacement
battery order
form
Base Handset
AC adaptor
(U120030D)
Belt clip
(CLT-2422 only)
Handset
battery
Telephone
line cord
Wall mount bracket
CLT-2422E-NEW 7/16/02 9:08 AM Page 4
O
3
1
2
Mounting on a wall
Do not attempt to wall-mount the phone before initial 12-hour
charging is completed.
Follow steps 1– 3 above to charge the handset.
4. Remove the handset
from the base and set
aside. Turn the base over
and align the four slots
on the bottom of the base
with the four hook-tabs
on the bracket.
5. Insert the hook-tabs into
the slots and push up
until the bracket snaps
securely into place.
6. Plug the telephone line
cord into the TEL LINE
jack on the back of the
base and into a modular
phone jack.
Note: If you have PULSE (rotary) telephone line, set the
PULSE/TONE switch on the back of the base to PULSE.
7. Slip the mounting holes over the wall plate posts and slide the
unit down firmly into place. (Wall plate not included.)
8. Place the handset in the base.
Note: If desired, gather the extra AC adaptor cord and telephone line
cord together, fasten with a wire tie, and store inside the wall
mounting bracket.
Digital Security System
Your cordless phone uses a digital security system to provide
protection against false ringing, unauthorized access and charges to
your phone line. When you place the handset in the base, the phone
verifies its security code. After a power outage or battery replacement,
you should place the handset in the base for about 20 seconds to reset
the code.
7
Battery setup
1. Remove the battery compartment cover
on the handset, insert the battery, plug
the cord into the jack (inside the
compartment) and replace the cover.
2. Set the handset RINGER switch to ON,
and place handset in the base.
3. Plug the AC adpator into the POWER DC
12V jack on the back of base and the
other end into an electrical outlet. The
CHARGE/PAGE indicator comes on
verifying the battery is charging.
Charge the handset for
12 continuous hours prior to first use. The
initial battery charge is important for best
performance.
Note: It is normal for
the handset and base
to get warm when
the handset is
charging in the base.
Note: For desktop
charging only, the
handset is able to charge facing up or down.
Telephone line connection
4. Plug the telephone line cord into the TEL LINE jack on the back of
the base and into a modular phone jack.
Tone/pulse setting
5. If you have PULSE (rotary) telephone line, set the PULSE/TONE
switch on the back of the base to PULSE. For touch-tone service
line, do nothing as your phone has been set to TONE at factory.
If you do not know which type of service you have, contact your
local telephone company.
Caution: Use only the Sanyo AC adaptor (U120030D) that is supplied
with this phone. Using another AC adaptor may damage the phone.
6
GETTING STARTED
GETTING STARTED
CLT-2422E-NEW 7/16/02 9:08 AM Page 6
1
LINE
3
1
2
NAMES AND CONTROLS
Base unit
9
NAMES AND CONTROLS
Handset
8
TALK/CALL BACK key
(also used to END a call)
LCD screen
VOLUME keys
CID ▲ or ▼ key
7-10-11/HOLD key
7-10-11 CID
DISPLAY key
HOLD key
REDIAL/DEL
(delete) key
RINGER switch
MUTE key
CHAN (channel) key
CANCEL key
CANCEL key
MEM (Memory) key
MEM (Memory)
key
FLASH/PROG
(program) key
FLASH/
PROGRAM key
Microphone
Charging
contacts
Incoming call visual
alert LED
Earpiece
PAUSE key
PAUSE key
TONE key
CALL BACK key
LCD screen
Volume
(VOLUME)
keys
CID ▲ or ▼ key
REDIAL/DEL
(delete) key
MUTE key
PAGE/INTERCOM
key
TONE key
INT (intercom) key
VOICE MAIL/
IN USE indicator
SPEAKER key
CHARGE/PAGE
indicator
Speaker
TONE/PULSE selection switch is located
on the back of the base unit.
CLT-2422E-NEW 7/16/02 9:08 AM Page 8
O
Area code setting
For proper Caller ID operation, you must enter your area code. This
setting can only be done from the base.
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROGRAM three times.
SSEETT AARR EEAA CCOODD EE
shows on screen.
3. Enter your 3-digit area code using the number keys.
4. Press FLASH/PROGRAM to confirm.
Ringer tone setting
On the base:
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROGRAM four times.
SSEETT RRII NNGGEERR TT OONNEE
shows on the screen.
3. Press CID ▲ or ▼, or press the 1, 2, or 3 number keys to select
the desired ringer tone.
4. Press FLASH/PROGRAM to confirm.
On the handset:
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG two times.
SSEETT RRII NNGGEERR TT OONNEE
shows on the screen.
3. Press CID ▲ or ▼, or press the 1, 2, or 3 number keys to select
the desired ringer tone.
4. Press FLASH/PROG to confirm.
Time setting
The time and date are programmed automatically when Caller ID
information is successfully received after setup.
1. Phone must be OFF (not in TALK mode).
2. Press FLASH/PROGRAM on the base five times.
SSEETT TTII MMEE
shows on the screen.
3. Enter the hour and minutes using the number keys (0 – 9).
4. Press CID ▲ or ▼ key to select AM or PM.
5. Press FLASH/PROGRAM to confirm.
11
10
INITIAL PROGRAMMING
Before using this telephone 6 initial settings must be completed on the
base: Language, Screen contrast, Area code (This is required to use
Caller ID service from your telephone company), Ringer tone and
Time.
Note: The Language selection and Ringer tone setting must be done
separately for the handset and for the base.
Language setting
On the base:
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROGRAM on the base.
11 EENNGGLLIISSHH 22 FFRRAA 33 EESSPP
shows on screen.
3. Press CID ▲ or ▼ , or the number keys to select the desired
language.
4. Press FLASH/PROGRAM to confirm.
On the handset:
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG on the handset.
11 EENNGGLLIISSHH 22 FFRRAA 33 EESSPP
shows on screen.
3. Press CID ▲ or ▼, or the number keys to select the desired
language.
4. Press FLASH/PROG to confirm.
Screen contrast setting
To adjust the base screen only.
The handset screen is not adjustable.
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROGRAM twice.
SSEETT CCOO NNTTRRAASSTT
shows on screen.
3. Press CID ▲ or ▼, or the 1 or 2 number key to select the desired
contrast.
4. Press FLASH/PROGRAM to confirm.
INITIAL PROGRAMMING
CLT-2422E-NEW 7/16/02 9:08 AM Page 10
Loading...