Sanyo CE28FWH5-B Instruction Manual
CE28FWH5-B
CE32FWH5-B
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Colour Television
INSTRUCTION MANUAL
100Hz
2
SAFETY
SAFETY
PRECAUTIONS
PRECAUTIONS
Do not allow anything to rest on the power cord. Do not locate
this television receiver where the cord will be damaged by
people walking on it.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to protect it from overheating. These openings
must not be blocked or
covered. The opening
should never be covered with a cloth or
other material, and the bottom openings
should not be blocked
by placing the television receiver on a bed, sofa, rug, or other
similar surface. This television receiver
should never be placed
near or over a radiator or heater.
This television receiver
should not be placed in a built-in
installation such as a bookcase unless proper ventilation is
provided.
Do not place your television receiver on an unstable stand, shelf
or table. Serious injury to an individual, and damage to the
television may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions.
If the television is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your television, and can be dangerous.
This television receiver should be operated only from the type of
power source indicated on the television or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.
Never add accessories that have not been specifically designed
for this television.
Do not drop or push objects into the television cabinet slots or
openings. Some internal parts carry hazardous voltages and
contact may result in an electric shock hazard.
Never spill liquids
of any kind on the television receiver.
Do not place items such
as vases containing liquid on top of the TV set.
Do not expose the television receiver to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement,
etc. Before cleaning, unplug the television receiver from the wall
socket.
Never stand on, lean on or push the
television or its stand.
Never allow
children to play with the television or its
stand. Serious injury may result if it
should fall.
Do not apply liquid cleaners or aerosol
cleaners directly onto the television
receiver. Use a damp cloth for cleaning.
Do not place candles or hot objects
upon the TV, next to it or behind it.
Open flames must never be used near
the TV set.
MINIMUM DISTANCES
Installation
Use
CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety.
But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver
observe the following basic rules for its installation, use and servicing.
Your television is fully transistorised and does not contain any
user serviceable components.
You must not remove the rear cover of the TV by yourself. The
apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and
service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same
safety standards as applicable to the original parts. The use of
original spare parts can prevent fire, shock and other hazards.
Unplug the television receiver from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
■ If the power cord or plug is damaged.
■ If liquid has been spilt into the television
receiver.
■ If television receiver has been exposed to rain or water.
■ If the television receiver has been dropped or the cabinet has
been damaged.
■ If the television receiver exhibits a distinct change in performance.
■ If the television receiver does not operate normally by following
the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician
to restore the television receiver to normal operation.
Servicing
Important:
This equipment is fitted with an approved non rewireable UK mains
plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI
approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but
replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 5 Amp, ensure the fuse
cover is correctly fitted. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the
following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the
letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol
or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the wires.
10cm
20cm
10cm
5cm
3
Connect your aerial cable socket to the back of the TV set.
Connect the power cord of the TV set to a wall outlet.
✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz.
When the TV set is not to be used for an extended period of time,
it is advisable to disconnect the power cord from the power outlet.
✐ For all aerial problems please consult your local dealer.
● Connecting DVD / VCR player/ Satellite receiver
or Set top box.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connection. For further information please consult your local dealer.
Please refer to individual Instruction Manuals for each piece of equipment for their connection suggestions.
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.
Press the
Mains on off switch on the front of the TV set.
This TV set provides a self- automatic
tuning function called Plug and Play which
automatically searches and stores all of the
available TV stations in your reception area.
A welcome message will appear, once this has finished the following
screen appears.
To remove the completed message press the
5, 6or 1, 2
buttons.
Now the installation is complete!
After Plug & Play the TV set automatically allocates the following
major stations in the UK.
Position 1 : BBC1
Position 2 : BBC2
Position 3 : ITV
Position 4 : CH4
Position 5 : CH5
Position 6 : SKY, BBC-World, or BBC-Prime.
✐
If any other channels are available in your reception area, the remaining stations will be stored from programme position 7 in sequence as
found.
✐
If you move to another city or cable is installed, please follow the
description “TUNING”. (on page 6).
✐
This procedure only appears the first time you switch on.
Press 5 and 6 to increase or decrease the programme position.
Press
1 or 2 to increase or decrease the sound volume.
■ Front terminals
✐
To select the AV3 mode press the v button repeatedly.
✐
When the headphones are inserted the sound from the TV
speakers is muted.
INST
INST
ALLA
ALLA
TION
TION
Step : 1 Connections ( Essential)
Step : 2 Remote control battery installation
AC Mains Outlet
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
Step : 3 Switching on / Plug & Play
TV front controls / Terminals
AV2
ANT.75Ω
AV1
TV
AV2
ANT.75Ω
AV1
Thank you for purchasing your SANYO TV.
Now I am searching and storing all programmes.
Please wait.
Auto set-up completed. Happy viewing!
Option if no DVD
VCR
Set top box
or
Satellite
VCR
TV
OUT
IN
DISH
IN
OUT
IN
For satellite
only
DVD
Headphone
Jack
AV3 Video/ Audio-input Jacks
From Camcorder
or video game
equipment
Camcorder
Game
equipment
4
Standby / Power on-off
-
To switch the TV ON and OFF.
Direct programme selector
For direct access to programmes using (0-9) numeric buttons.
For selection of programme position 10-99, eg.23, first press
-/-- button and press 2 and 3 numeric buttons.
TV/AV switch
-
To switch TV, AV1, AV2 or AV3 mode press
repeatedly.
Sound mute
To mute the sound from the speakers. The sound changes as
follows; Normal volume -> Half volume -> Mute
Wide - Press to select the following picture modes AUTO -
NATURAL - ZOOM (14:9) - TITLE IN (14:9) - ZOOM (16:9) TITLE IN (16:9) - FULL - NORMAL.
Nicam/Bilingual selector
To switch the sound mode as follows; NICAM or MONO for
nicam stereo programmes. A,B or MONO for nicam bilingual
programmes. You can also select
the sound track L (left), R
(right) or L/R in AV mode.
Picture mode selection -
Press the 9 button repeatedly to select the following
picture modes.
PERSONAL - Personal preference mode.
STANDARD - Normal viewing mode.
ECO - Suitable for dimly lit rooms and gives a cinema - like
effect.
DYNAMIC - Suitable for brightly lit rooms.
Programme information call
To display the programme information.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> NTSC4.43 -> NTSC3.58->
3D surround mode selector
This TV provides an incredible 3 Dimensional sound effect.
Active : Gives the optimum 3D surround effect.
Off : To cut off 3D surround effect.
Optimum positioning
Sit at a distance of approximately 2 to 4 meters from the TV
set. Listen facing the centre of the TV set.
Remove any obstructions between you and the TV set.
Bass expander switch
To get an emphasised bass sound.
Time display
In the TV mode, if the teletext is available the teletext clock will be
displayed on the screen for 5 seconds.
Programme swap
To switch between current and previous programme position
watched.
Menu - To enter and exit sub menus.
Programme down/up
To select the next programme number or previous programme
number. Also operates as up and down cursor.
Level up/down
To adjust the sound volume level. Also operates as left and right
cursor.
F/OK button - Press to store channel selection and memo-
rise selected items.
CS button
To select channels directly. Press button to display current channel
number on the screen. Press button repeatedly until C-- appears and
enter number eg. 5 and 9 for channel 59.
The channel number changes from yellow to red when selected and
when you press the F/OK button it momentarily turns blue. This
shows the channel is stored.
■ VCR / DVD controls
With selected Sanyo DVD/VCR players you can use this remote. The
following table shows all available function buttons for the VCR and
DVD. When you use a compatible Sanyo DVD player, first press and
hold the DVD button and then press your desired function button.
Teletext - This is a free service to give you lots of varied information
such as news, sports results, weather and travel features.
To access this feature press the TXT/TV button the picture
changes from TV - TXT - PAT (Picture and Text side by side)
and back to TV.
Direct access to a page
All the numeric buttons can be used to select a page number
directly. If you need page 301, press 3 then 0 and then 1.
Direct access to subject headings
Coloured boxes are displayed at the bottom of
the screen. the 4 coloured buttons give access
to the corresponding subjects or pages.
Index page selector -
This selects one of the teletext index
pages.
Up / down page access -
Press the button to select the
next page or previous page number.
Sub page access
Some text pages are made up of several sub pages which rotate
automatically. If you wish to view P4 of 8 press the sub page
button. “Subcode ----” will appear. Enter 0004 and it will appear.
Cancel - To view the TV picture in the teletext mode while
waiting for sub page to change or page to update.
Stop -
This stops the sub pages from changing. The symbol
“ ” will appear instead of the page number.
Size switch -
This will make either the top half or the bottom
half of the page expand to fill the whole screen.
Reveal switch -
This reveals hidden items on the teletext page
eg: a hidden answer to a quiz question.
Teletext reception
If your aerial signal is poor, the teletext reception operation may be
erratic.
Teletext brightness level
You can change the teletext brightness level. Please return to TV
mode.(See Picture menu -Text Bright on page 5).
Sound volume control
In teletext mode sound volume and muting can be controlled.
However they are not displayed on the screen.
GENERAL
GENERAL
OPERA
OPERA
TION -
TION -
REMOTE CONTROL
REMOTE CONTROL
General use
Teletext
Sound Status
Off-timer
NICAM
OFF 01:30
03
Programme
Position No.
VCR DVD (blue symbols)
Power Power
Play Play
Pause Pause
Stop Stop
Fast/Cue Next chapter selection
Rewind/Review Previous chapter selection
DVD
n/a
n/a Cursor selection
Record, press both buttons at the same time.
n/a DVD command mode selection
OK
Enter
Loading...