INSTRUCTION MANUAL CE28DWN1-B
Colour Television
P |
Please read this Instruction book before using your television. We wish you many hours of pleasure from your new television.
END-USER LICENCE & SAFETY PRECAUTIONS
|
|
|
ware other than the product; |
|
|
End-User Licence |
|
||
|
|
● copy all or part of the Software; |
||
The product (meaning the equipment or appliance to which this docu- |
● incorporate all (or any of) the Software into other programs |
|||
mentation relates) incorporates Software (the software applications, |
developed by (or on behalf of) you and/or used by you; |
|||
utilities and modules embedded within the Product) which is owned by |
● reverse-engineer, decompile or disassemble the Software; |
|||
Sanyo or its licensors. Before using the product, please read the |
● make the Software (or any part of it) available, or permit its |
|||
End-User Licence Conditions detailed below. If you do not agree to |
||||
redistribution, for use with any computer hardware other than the |
||||
the terms and conditions of the End-User Licence, Please do not pro- |
||||
Product; or rent, lease,gift,loan,sell,distribute or transfer posses- |
||||
ceed to use the Productrepack the Product unused and return it to |
||||
sion of the whole or any part of the Software. |
||||
your supplier together with proof of purchase for a full refund. By |
||||
|
||||
using the product, you agree to be bound by the terms and conditions |
Termination |
|||
of the End-User Licence. |
This licence is effective until terminated. This licence will terminate |
|||
|
|
|
||
Licence Grant, Conditions and restrictions |
automatically without notice if you fail to comply with any of its provi- |
|||
1. Sanyo grants you a non-exclusive, world-wide (subject to export |
sions. |
|||
Disclaimer |
||||
|
controls), non-transferable (except as permitted by 2 below), |
|||
|
royalty-free licence to use the Software upon and with the Product. |
1. The Software is(to the extent permitted by law) supplied ‘as is’ and |
||
|
|
|
||
2. You may not transfer any or your licence rights in the Software |
SANYO and its suppliers expressly exclude all warranties, express |
|||
or implied, including (but not limited to) warranties of satisfactory |
||||
|
without the prior written consent of SANYO and if consent is pro- |
|||
|
quality, fitness for purpose and non-infringement (save to the extent |
|||
|
vided then the Software shall only be transferred in conjunction |
|||
|
that the same are not capable of exclusion at law). |
|||
|
with the transfer of the Product AND provided that the transferee |
|||
|
|
|||
|
has read and agreed to accept the terms and conditions of this |
2. In no circumstances will SANYO be liable for any direct, indirect, |
||
|
licence. |
consequential, or incidental damage (including loss of profits, busi- |
||
|
|
|
||
3. You must ensure that the copyright, trademark and other protective |
ness interruption, loss of data or the cost of procurement of substi- |
|||
tute goods, technology or services) arising out of the use or the |
||||
|
notices contained in the Software are maintained and not altered or |
|||
|
inability to use the Software (save to the extent that such liability is |
|||
|
removed. |
|||
|
not capable of exclusion at law). |
|||
|
|
|
||
4. The Software provided hereunder is copyrighted and licenced (not |
General |
|||
|
sold). SANYO especially does not transfer title or and ownership |
|||
|
1. This End-User Licence will be governed by laws of England and |
|||
|
rights in the Software to you. The Software provided hereunder |
|||
|
the User may only bring claims in the English Courts and SANYO |
|||
|
may contain or be derived from portions of materials provided to |
|||
|
shall be entitled to bring a claim in the courts of any jurisdiction. |
|||
|
SANYO under licence by a third party supplier. |
|||
|
|
|||
5. Except as expressly permitted by statute you may not; |
2. The above terms and conditions supersede any prior agreement, |
|||
|
● use the Software in conjunction with any other computer hard- |
oral or written, between you and SANYO relating to the Software. |
||
|
|
|
|
CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety. But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.
Installation |
|
Use |
|
|
|
Do not allow anything to rest on the power cord. Do not locate this television receiver where the cord will be damaged by people walking on it.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings must not be blocked or covered. The opening should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television receiver on a bed, sofa, rug, or other similar surface. This television receiver should never be placed near or over a radiator or heater.
This television receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
Do not place your television receiver on an unstable stand, shelf or table. Serious injury to an individual, and damage to the television may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions.
|
|
MINIMUM DISTANCES |
|
5cm |
||
10cm |
|
10cm |
|
|
||
|
|
|
||||
|
|
|
|
|
|
|
20cm
If the television is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your television, and can be dangerous.
This television receiver should be operated only from the type of power source indicated on the television or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.
Never add accessories that have not been specifically designed for this television.
Do not drop or push objects into the television cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard. Never spill liquids of any kind on the television receiver. Do not place items such as vases containing liquid on top of the TV set.
Do not expose the television receiver to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc.
Before cleaning, unplug the television receiver from the wall socket.
Never stand on, lean on or push the television or its stand. Never allow children to play with the television or its stand.
Serious injury may result if it should fall.
Do not apply liquid cleaners or aerosol cleaners directly onto the television receiver. Use a damp cloth for cleaning.
Do not place candles or hot objects upon the TV, next to it or behind it. Open flames must never be used near the TV set.
2
INSTALLATION
Please make sure that you have read the End-User section on page 2 before you activate Plug and Play.
Step : 1 Connections ( Essential)
Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown below or as shown opposite when AV equipment is connected.
ANT.75Ω
AV2 |
AV1 |
CI |
|
|
● Connecting DVD / VCR player or Satellite receiver.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connection. For further information please consult your local dealer.
TV rear panel
ANT.75Ω
AV1 |
CI |
|
Connect the power cord of the TV set to a wall outlet.
AC Mains Outlet
The TV set is prepared for a mains voltage AC220~240V, 50Hz.
WARNING! High voltages are used in the operation of this set. Refer service to qualified service personnel.
When the TV set is not to be used for an extended period of time, it is advisable to disconnect the power cord from the power outlet.
For all aerial problems please consult your local dealer.
Important:
This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:
1.Remove the fuse cover and fuse.
2.Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.
3.Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue ------- |
> |
Neutral |
Brown ---- |
> |
Live |
1.The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
2.The Brown wire must be connected to the terminal with the letter
“L” or coloured RED.
3.Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.
Option if no DVD
VCR |
OUT |
|
IN |
Satellite |
DISH |
OUT |
|
IN |
|
VCR |
TV IN |
For Satellite only
DVD
Please refer to individual Instruction Manuals for each piece of equipment for their connection suggestions.
Step : 2 Remote control battery installation
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the batteries match the "+" and "-" marks inside the unit into the remote control handset.
3
INSTALLATION
Step : 3 Switching on / Plug & Play
Press the Mains on off switch on the front of the TV set.
The self-automatic tuning system called |
|
|
|
|
|
|
|
|
|
Plug and Play will start. The TV scans |
|
|
|
|
|
|
|
|
|
the analogue channels first and then |
P |
|
|
|
switches to digital channel mode and |
|
|
|
|
scans digital channels. This could take up |
|
|
|
|
to 15 minutes. During automatic tuning,
the TV displays the tuning status of analogue and digital channel tuning on the screen.
|
|
|
|
|
|
|
|
|
|
Thank you for purchasing your |
|
|
|
|
|
|
|
|
SANYO TV. |
|
|
|
|
|
|
|
|
Now I am searching and storing all |
|
|
|
|
Analogue Set-up completed |
||
|
programmes. |
Please wait. |
|
|
|
|
Next digital Set-up is starting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scan for channels |
Scan for channels |
|||
|
Channels found |
0 |
|||
Channels found |
|
||||
|
55 |
|
|
||
|
|
|
|
|
|
|
|
|
The scan will take approximately 3 minutes |
||
Done |
OK |
Save |
In progress |
RET |
Stop |
|
|
|
Press OK to save.
All channels
1 BBC ONE
2BBC TWO
3ITV 1
4Channel 4
5five
6ITV 2
7BBC THREE
8Teletext
9BBC FOUR
10Sky Travel
11UK History
12Ch 14
13CH 15
14QVC
15 TV Travel Shop
OK Watch TV |
RET Cancel |
Press OK to Watch TV.
Now the installation is complete!
After Plug & Play, Digital channels are stored in the programme positions shown in the All channel table.
Analogue channels will be automatically sorted as follows:
Programme position 1 : BBC1 Programme position 2 : BBC2 Programme position 3 : ITV Programme position 4 : CH4 or S4C Programme position 5 : CH5 Programme position 6 : ITV2
Programme position 7 : channels in order found.
If any other channels are available in your reception area, the remaining channels will be stored from programme position 7 in sequence as found.
If you move to another city or cable is installed, please follow the description “TUNING”. (on page 13).
This procedure only appears the first time you switch on.
TV front controls / Terminals
P
Press 5 and 6increases or decreases the programme position. Press 1 or 2increases or decreases the sound volume.
Mains ON/OFF
Power indicator.
|
Headphone |
AV3 Video/ Audio-input Jacks |
||||||||||||||
|
Jack |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
From Camcorder Camcorder or video game
equipment Game equipment
■ Front terminals
To select the AV3 mode press the vbutton repeatedly.
When the headphones are inserted the sound from the TV speakers is muted.
3.5 mm Mini Headphone din
AV3 Video in
AV3 Left Audio in
L/S
R/D AV3 Right Audio in
4
REMOTE CONTROL - Digital Use
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Half volume -> Mute
TV/AV switch
To switch from Digital TV, AV1, AV2 or
AV3 mode press repeatedly.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons for example for channel 23, press 2 and 3 numeric buttons.
Volume up/down
To adjust the sound level.
MENU
To switch on the screen display menu on/off.
See page 6.
Cursors
To select the sub menu items in the menu display, Up, Down, Left, Right.
Guide
To call up the Digital TV schedule guide display on the screen. (refer to page 11).
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
OK
To save the setting in the menu, or to call up the All channel table.
Bass selection
To get an emphasised bass sound, ON or OFF.
Screen mode selector
To select the screen mode, AUTO, NATURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL.
Standby/Power on/off
To switch the TV on and off.
Also see page 14.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, ECO and
DYNAMIC.
System selector
To select the colour system in the AV mode, AUTO,PAL,NTSC 4.43 or NTSC3.58.
Coloured buttons
Some channels have interactive services. Use the red button to enter and other colours as directed. Also used in menu functions.
Programme up and down
To select the next programme number or previous programme number.
INFO
Shows the current and next programme on the selected channel. (refer to page 11).
D/A selector
To switch between analogue and digital channels.
Return
Returns back to previous screen in menu. Exits interactive mode.
Subtitle
Displays sub titles On and Off.
You may need to switch to title in by pressing WIDE button. See page 17.
5
DIGITAL OPERATION
Main menu
The main menu screen takes you to many functions in the TV. The buttons below are the main buttons and their uses.
MENU button - Enters and exits menus.
Cursors e and dmoves up and down in each selected menu.
Main Menu
Picture
Sound User lists
Parental lock Configuration Channel list Technical information Timer recording
Off Timer TV settings
Cursor 7 changes levels, moves to the left and returns to previous menu.
Cursor 8 changes levels, moves to the right and enters next menu.
RETURN button - Returns to the previous screen.
Picture menu
Refer to bar at bottom of screen for added help in which buttons to use.
1.Press the MENU button and select Picture using e or d buttons.
2.Press 8 to select.
Select using e , d buttons and adjust to obtain the best picture settings for your environment using 7 , 8 buttons.
Brightness
Contrast |
Colour |
Sharpness |
memory? |
Tint : Colour phase if NTSC equipment is detected.
Brightness
Contrast
Colour
Sharpness
memory ? |
memory |
■ Storing personal picture preferences
If you have altered any of the settings in the Picture menu you can store them. You can be recall again later.
In the picture menu select memory by pressing the d button.
Press the 8button, a tick appears in the box and the settings are stored.
Press the MENU button repeatedly to exit the menu.
Sound menu
Press the MENU button and select Sound using e or d buttons, press the 8button to enter.
Volume 10
Bass |
Treble |
Balance |
Select and adjust to obtain the best sound settings for your environment using e , d and 7 , 8 buttons.
Press MENU to return to Main Menu. These settings automatically store when you exit the menu.
Press MENU repeatedly to exit menu.
User Lists
You can set up different user lists to allow quick access to your favourite channels.
■ Setting User Lists
1.Press MENU button to select main menu.
2.Select User Lists by pressing d button.
3.Select Your TV lists menu by pressing 8 button.
Your TV lists
List 1
List 1
List 1
List 1
List 1
List 1
List 1
List 1
List 1
4.Select a List eg. List 1 by pressing e or d button. Enter by pressing
8 button
5.Press 8 to add channels to your list. Use e or dto highlight channel selection. Press OK to add to your list, a X will appear next to the channel.
6.Repeat to add all the channels you want in your list.
7.Press Blue button to save selection.
8.Add more channels, move selection, rename list, remove or swap or press the OK button to finish the list or MENU to exit.
■ Move selection.
To change the order of channels in your list.
1.Select the channel you wish to move using the e or dbuttons..
Free slot |
|
1 |
|
|
|
|
|
|
2 |
|
|
|
|
|
3 |
|
|
|
|
|
4 |
|
|
|
|
|
5 |
|
|
|
|
|
6 |
|
|
|
|
|
7 |
|
|
|
|
|
8 |
|
|
|
|
|
9 |
|
|
|
|
|
10 |
|
|
|
|
|
11 |
|
|
|
|
|
12 |
|
|
|
Add channels |
|
R |
Remove |
|
G |
Move selection |
|
Y |
Swap |
|
B |
Rename list |
|
OK Save |
|
|
List 1 |
|
|
All channels |
|
|
BBC ONE |
1 |
BBC ONE |
X |
||
2 |
BBC TWO |
|
|
|
|
3 |
ITV 1 |
|
|
|
4 |
Channel 4 |
Free |
5 |
five |
||
|
|
|
6 |
ITV 2 |
|
|
|
7 |
BBC THREE |
|
|
|
8 |
Teletext |
|
|
|
9 |
BBC FOUR |
|
|
|
10 |
Sky Travel |
|
|
|
11 |
UKHistory |
|
|
|
12 |
Ch 14 |
|
|
|
13 |
CH 15 |
|
|
|
B Save |
|
|
OK |
Select |
|
|
List 1 |
|
BBC ONE |
1 |
BBC ONE |
|
2 |
BBC TWO |
|
3 |
ITV 1 |
Free |
4 |
Channel 4 |
|
5 |
five |
|
6 |
ITV 2 |
|
7 |
BBC THREE |
|
8 |
BBC FOUR |
|
9 |
UKHistory |
|
|
|
G Put here
2.Press the Green button to select the channel.
3.Use e or dto move to a different position
4.Press the Green button to save the new order.
Repeat steps 1-4 until all channels are in the order you need.
5.Add more channels, move selection, rename list, remove or swap or press the OK button to finish the list or MENU to exit.
■ Rename List.
1. Press Blue button to rename your list. see picture.
?Rename list
Choose letter OK Save RET Cancel
2.Use 7 or 8 to move left or right.
3.Use e or d buttons to choose a letter, symbol or number. (A-Z, 0-9, -,+ etc.)
4.Press OK to save new user list name.
5.Add more channels, move selection, rename list, remove or swap or press the OK button to finish the list or MENU to exit.
6