Sanyo CA21SE1M, CA21VF1K, CP21VF1K, CP14SE1M, CA21SE1V User Manual

...

CA14SE1M

INSTRUCTION MANUAL

Colour Television

CP14SE1M CA14SE1K CP14SE1K CA14SE1(V) CP14SE1(V) CA21CF1(V) CP21CF1(V) CA21CF1M CP21CF1M CA21SE1M CP21SE1M CA21SE1K CP21SE1K CA21SE1(V) CP21SE1(V) CA21VF1

Multi System CATV Hyper Band 256 Programmes with Automatic Tuning

CP21VF1 CA21VF1K CP21VF1K

nings and Cautions

WWararnings and Cautions

Warning

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. The television shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the television.

Caution

Never stand on, lean on or push suddenly the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.

At installation of the unit, the plug of power cord shall remain accessible and readily operable to disconnect the unit from the wall outlet. When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight and other source of the heat. Do not stand the television receiver directly on other products which give off heat. E.g. video cassette players, audio amplifiers.

Minimum distances

10cm

20cm

Heat build-up can reduce the service life of your television, and can also be dangerous.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Do not squash power supply cord under the television receiver.

10cm

5cm

If the television is to be built into a compartment or similarly enclosed, the minimum distances must be maintained.

Contents

Plug & Play

Warnings and Cautions . . . . . . . . . . . . . . 2

Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3

Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3

Front Control . . . . . . . . . . . . . . . . . . . . . 4-5

Remote Control Transmitter . . . . . . . . . . 6

Battery Installation of

the Remote Control Transmitter . . . . . . . 6

General Operation

Remote Control Operation . . . . . . . . . 7

OFF TIMER . . . . . . . . . . . . . . . . . . . . 8

ON TIMER . . . . . . . . . . . . . . . . . . . . . 8

Colour and Sound System

Setting of the Colour System . . . . . . . 8

Setting of the Sound system . . . . . . . . 8-9

Picture Adjustment . . . . . . . . . . . . . . . . . 9-10

Audio Adjustment . . . . . . . . . . . . . . . . . . 10

Tuning of the Channels

Automatic Tuning . . . . . . . . . . . . . . . 11

Semi-Auto Tuning and Manual Tuning

Channel Copy . . . . . . . . . . . . . . . . . . 12

Channel Swapping . . . . . . . . . . . . . . 12

Skip Channel Set and Cancel . . . . . . . . . . .12-13

Setting of the Private Position . . . . . . . . 13

Setting of the OSD Language . . . . . . . . . 14

Connecting Other Equipment . . . . . . . . . 14

Connecting to the Rear AV1 Input

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15

Selecting the Colour System in AV

Mode . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting to a DVD Player with AV1(DVD) Video Component output terminal . . .15 Connection to the Front AV2 Input

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting to the Monitor Output

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

AV Connection to the Aerial Socket . . . . 16

Aerial Connection . . . . . . . . . . . . . . . . . . 17

Care and Cleaning . . . . . . . . . . . . . . . . . . 17

Specifications . . . . . . . . . . . . . . . . . . . . . 18

Helpful

Hints-Problems/Solutions . . . . . . . . . . . 19

.11

Automatic setting up channels

This TV set provides a self-automatic tuning and sorting system function called “Plug & Play”. It automatically begins searching and storing of all available channels when switching-on the TV set for the first time.

Let’s start !

Connect power cord of the TV set to a wall outlet, and turn on the TV set by pressing the

Mains ON/OFF button. Self-automatic tuning system will be started as follows;

I AM SEARCHING.

ALL PROGRAMMES.

PLEASE WAIT.

After completing this procedure, the programme position 1 is selected and the ending messages on the screen.

Note: The Plug & Play can be cancelled at any

time by pressing the MENU button.

Press any of the control buttons to make the ending message disappear. Or will

automatically return to normal TV display after 10 seconds.

✐ This procedure only appears at the first

switch-on time.

■ If no TV stations are found, the display shown below will appear. Please check if the antenna is connected properly.

AUTO SET-UP

COMPLETED.

HAPPY VIEWING !

NO STATION.

PLEASE CONNECT

ANTENNA PLUG.

If it isn’t connected properly, connect antenna and Automatic Tuning will be reset.

ont Controlol

FrFront Contr

Each button listed in this section has the same function as it’s corresponding button on the remote control.

Model CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V), CA21VF1, CP21VF1,

CA21VF1K, CP21VF1K

Remote Control Detector

V/A

MEN

L-AU

O-R

POW

Video Input Jack (AV2)

Audio Input Jack-Left (AV2)

Audio Input Jack-Right (AV2)

TV/AV Selector

Mains ON/OFF Button

Stand-by and Power Indicator

Programme UP/DOWN

VOLUME

Model CA21CF1(V), CP21CF1(V)

Video Input Jack (AV2)

Audio Input Jack-Left (AV2)

Audio Input Jack-Right (AV2)

TV/AV Selector

Mains ON/OFF Button

Remote Control Detector

Stand-by and Power Indicator

Programme UP/DOWN

VOLUME

ont Controlol

FrFront Contr

Each button listed in this section has the same function as it’s corresponding button on the remote control.

Monaural Model

Model CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M, CP21SE1M,

CA21SE1K, CP21SE1K

Remote Control Detector

Video Input Jack (AV2)

Audio Input Jack (AV2)

TV/AV Selector

Model CA21CF1M, CP21CF1M

Video Input Jack (AV2)

Audio Input Jack (AV2)

TV/AV Selector

MEN

- +

Stand-by and Power Indicator

Programme UP/DOWN

VOLUME

Programme UP/DOWN

VOLUME

POW

Mains ON/OFF Button

Remote Control Detector

Stand-by and Power Indicator

Remote Contr

-/- -

Remote Contr

ol T

ransmitter

ol T

ransmitter

TV / AV Selector button

RECALL/COLOUR SYSTEM button

Programme Selector button

DIGIT button

SWAP button

VOLUME - button

STEREO/MONO button

(This button is not used)

Programme DOWN button

* BASS EXPANDER button

* SOUND MODE button

TV / AV

-/- -

SWAP

A•B

BASS

SOUND

TIMER

JXPSC

S. SYS

CH SCAN

PICTURE

SURROUND

TIMER button

Power ON/OFF button

MUTE button

ALTERNATE button Programme UP button

CHANNEL SCAN button

VOLUME + button

PICTURE MODE button

MENU button

* SURROUND button

SOUND SYSTEM button

* For monaural models this button is not used.

Battery Installation of the Remote Control Transmitter

1. Open the battery cover.

2. Install two “AA” 1.5 volt batteries so that the “+” and “-” marks on the batteries match the “+” and

“ - ” marks inside the unit.

3. Close the battery cover.

Note: Replace the batteries when the TV set is showing the following symptoms:

Operation is unsteady or erratic, sometimes the TV set does not work with transmitter.

Discharged batteries may leak and damage the unit. The normal life of batteries should be from nine to ten months.

+ 14 hidden pages