Sanyo 2SC5228 Specifications

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.

NPN Epitaxial Planar Silicon Transistor

VHF to UHF Wide-Band Low-Noise

Amplifier Applications

Ordering number:EN5035

2SC5228

1.9

Features

· Low noise : NF=1.0dB typ (f=1GHz).

· High gain : S21e2=13.5dB typ (f=1GHz).

· High cutoff frequency : fT=7GHz typ.

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Electrical Characteristics at Ta = 25˚C

* : The 2SC5228 is classified by 20mA hFE as follows : Marking : LN

Package Dimensions

unit:mm

2110A

[2SC5228]

0.95

0.95

0.4

43

2

1

0.95

0.85

2.9

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

egatloVrettimE-ot-rotcelloCV

egatloVesaB-ot-rettimEV

tnerruCrotcelloCI

noitapissiDrotcelloCP

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

retemaraPlobmySsnoitidnoC

tnerruCffotuCrotcelloCI

tnerruCffotuCrettimEI

niaGtnerruCCD

tcudorPhtdiwdnaB-niaGf

ecnaticapaCtuptuOboCV

ecnaticapaCrefsnarTesreveRerCV

niaGrefsnarTdrawroF

erugiFesioNFNVECI,V5=

OBC
OEC
OBE

C

C

V

OBC

V

OBE

h

V

EF

V

T

2

V

|e12S|

1

2

V

2

|e12S|

I,V01=

BC
BE
EC
EC
BC
BC
EC
EC

0=0.1Aµ

E

I,V1=

0=01Aµ

C

I,V5=

C

I,V5=

C

I,V5=

C

I,V2=

C
C

0213060814090725531

Am02=
Am02=
zHM1=f,V01=
zHM1=f,V01=

zHG1=f,Am02=
zHG1=f,Am3=
zHG1=f,Am7=0.18.1Bd

0.5

2.5

1.5

0.6

0.5

0.8

1.1

hFE rank : 3, 4, 5

0.16

0 to 0.1

1 : Emitter
2 : Collector
3 : Emitter
4 : Base
SANYO : CP4

02V
01V
2V
07Am
002Wm

sgnitaR

nimpytxam

*06*072

57 zHG

57.02.1Fp

4.0Fp

115.31Bd
9Bd

˚C
˚C

tinU

21599TH (KT)/13095YK (KOTO) TA-0157 No.5035–1/5

2SC5228

No.5035–2/5

S Parameters

2SC5228

No.5035–3/5

S parameters (Common emitter)

VCE=5V, IC=7mA, ZO=50Ω

)zHM(qerFS|11|

001308.02.83–091.815.151620.03.17309.03.91–

002776.05.86–416.415.131240.03.95357.05.13–

004805.07.231–484.90.801160.06.15945.01.14–

006244.07.231–577.61.59370.09.05354.02.44–

008704.00.151–652.57.58680.01.25604.04.64–

0001393.05.361–582.45.87890.01.35383.09.84–

0021683.05.471–826.37.17111.08.35373.01.15–

0041683.03.571161.39.56521.08.35363.06.35–

0061783.03.861687.22.06831.05.35453.09.65–

0081393.00.161715.21.55251.02.35843.07.06–

0002204.06.251892.29.94661.01.25543.05.46–

VCE=5V, IC=20mA, ZO=50Ω

∠ S

2SC5228

11

S|12|

∠ S

12

S|21|

∠ S

21

S|22|

∠ S

22

)zHM(qerFS|11|

001295.06.26–349.035.631120.01.66357.02.13–

002854.08.99–426.026.511230.08.95145.09.14–

004763.01.831–135.114.79840.06.16073.00.54–

006743.03.751–419.70.88460.06.36013.05.54–

008833.06.171–630.66.08180.02.46782.00.74–

0001633.01.971088.47.47890.00.46672.07.94–

0021733.08.071311.42.96611.02.36472.04.25–

0041243.06.361855.30.46331.07.16862.04.55–

0061643.04.751431.32.95051.00.06262.03.95–

0081253.02.151428.24.45761.05.85952.08.36–

0002163.06.541575.20.05281.04.65652.02.86–

VCE=2V, IC=3mA, ZO=50Ω

)zHM(qerFS|11|

001309.00.82–563.93.951530.08.47559.02.41–

002628.03.35–314.81.241360.02.26568.08.52–

004276.00.29–962.61.711490.07.64486.07.93–

006985.00.811–847.44.101901.07.93565.08.64–

008045.03.831–987.36.98711.07.63794.04.15–

0001515.04.251–141.38.08521.00.63954.01.55–

0021305.02.561–786.22.27131.02.63834.03.85–

0041594.09.571–353.24.56831.02.73024.06.16–

0061494.02.571880.28.85641.00.83114.00.56–

0081594.04.661498.17.25551.04.93004.02.96–

0002205.01.851237.19.64361.00.04693.06.37–

∠ S

∠ S

11

11

S|12|

S|12|

∠ S

∠ S

12

12

S|21|

S|21|

∠ S

∠ S

21

21

S|22|

S|22|

∠ S

∠ S

22

22

No.5035–4/5

2SC5228

Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.

This catalog provides information as of February, 1999. Specifications and information herein are subject
to change without notice.

PS No.5035–5/5