Sanyo 2SC4407 Specifications

Page 1
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
NPN Epitaxial Planar Silicon Transistor
VHF/UHF Mixer,
Local Oscillator Applications
Ordering number:EN2760
2SC4407
0.3
Applications
· VHF/UHF mixers, frequency converters, local oscillators.
Features
· High cutoff frequency : fT=3.0GHz typ
· High power gain : PG=12dB typ (f=0.9GHz)
· Small noise figure : NF=3.0dB typ (f=0.9GHz)
· Very small-sized package permitting 2SC4407­applied sets to be made smaller and slimmer.
Specifications
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
egatloVrettimE-ot-rotcelloCV
egatloVesaB-ot-rettimEV
tnerruCrotcelloCI
noitapissiDrotcelloCP
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
C
C
Package Dimensions
unit:mm
2059B
[2SC4407]
0.425
2.1
1.250
0.425
OBC OEC OBE
3
12
0.65
0.65
2.0
0.3 0.6
0.15
0~0.1
0.9
1 : Base 2 : Emitter 3 : Collector SANYO : MCP
0.2
52V 51V 3V 05Am 051Wm
˚C ˚C
Electrical Characteristics at Ta = 25˚C
retemaraPlobmySsnoitidnoC
tnerruCffotuCrotcelloCI
tnerruCffotuCrettimEI
niaGtnerruCCD
tcudorPhtdiwdnaB-niaGf
ecnaticapaCtuptuOC
ecnaticapaCrefsnarTesreveRC
* : The 2SC4407 is classified by 5mA hFE as follows :
h
V
OBC
V
OBE
V
EF
V
T
V
bo
V
er
I,V51=
BC BE EC EC BC BC
0=1.0Aµ
E
I,V2=
0=01Aµ
C
I,V01=
Am5=
C
I,V01=
Am01=
C
zHM1=f,V01= zHM1=f,V01=
082040213060024001
(Note) Marking : KY
hFE rank : 2, 3, 4
• For CP package version, use the 2SC4270.
D1598HA (KT)/4298TA, TS No.2760–1/5
nimpytxam
5.10.3zHG
sgnitaR
*04*002
7.00.1Fp
54.0Fp
tinU
Page 2
2SC4407
niaGrewoPGPVECI,V01=
erugiFesioNFNVECI,V01=
NF Test Circuit
retemaraPlobmySsnoitidnoC
C C
sgnitaR
nimpytxam
zHG9.0=f,Am01=21Bd
zHG9.0=f,Am3=
.tiucriCtseTdeificepseeS
0.3Bd
tinU
1C 2C 3C 4C 5C 1L
2L
3L HC
zHM009
Fp5~
Fp01~ Fp01~ Fp01~ Fp01~
W l,mm5.1 mm52
enilpirtS
W l,mm4 mm52
enilpirtS
5.0 φ l, mm04 erocdaeb+t2
No.2760–2/5
Page 3
2SC4407
No.2760–3/5
Page 4
2SC4407
No.2760–4/5
Page 5
2SC4407
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of December, 1998. Specifications and information herein are subject to change without notice.
PS No.2760–5/5
Loading...