Sanuvox SRMax Installation Manual
SRMax Installation Manual
READ AND FOLLOW ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL
Installation and servicing of equipment can be hazardous. Only trained and qualied service personnel
should install, repair or service equipment. Follow national and local safety codes.
Always wear safety glasses and work gloves for protection.
SANUVOX TECHNOLOGIES INC. | 146, rue Barr, St-Laurent, Quebec, Canada H4T 1Y4
WARNING
INJURIES OR DAMAGED UNIT.
1-888-SANUVOX www.sanuvox.com
2
Table of Contents
About the SRMax ............................................................... 2
Important Safety Instructions & Warranty ..................... 3
Included in the Box ............................................................ 4
Available Options ............................................................... 4
Installation Precautions ..................................................... 5
Step by Step Installation .................................................... 6
Information from the Status LED .................................... 7
Reset the lamp timer .......................................................... 8
About the SRMax
GENERAL
e SRMax is specically designed to destroy biological and chemical contaminants* such as mold, bacteria, viruses,
chemicals, VOCS* and odors* that may be circulated through the HVAC system of your home.
e SRMax is installed in the RETURN (preferred) or SUPPLY plenum of our HVAC system treating the air passing
through the reecting chamber. e actual percentage of destruction obtained is based on percentage of fresh air,
air velocity, the number of passes and specic contaminants to be treated.
For information or recommendations to size appropriately your specic application, please call Sanuvox at 1-888-SANUVOX.
*Only with LMPRGXJ65 UV lamp
SAFETY PRECAUTIONS
Installation and servicing of air-conditioning and related equipment can be hazardous due to system pressure
and electrical components. Only trained and accredited service personnel should install, repair or service such
equipment.
Untrained personnel can perform basic maintenance functions such as replacing lamps. All other operations should
be performed by trained service personnel. When working on the SRMax, observe precautions in the literature, tags,
labels attached to the unit and any other safety precautions considered as best practices in the HVAC industry.
CLEANING PRECAUTIONS
For optimal air purication performance, the lamp and reecting chamber should be kept free of dust / residue
deposit and cleaned regularly using mild soaps or alcohol. Always spot test the cleaner to make sure it does not
damage the surface.
Under no circumstances should water be sprayed or splashed onto the SRMax.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Before installing or performing maintenance on the unit, TURN OFF and disconnect unit from power source.
Electrical shock may cause personal injuries or possibly death.
Never expose eyes or skin to ultraviolet light from any source. e UV purier MUST be DISCONNECTED
from power source before performing maintenance of service. Personal injury may result.
Do not touch lamp glass without gloves. Reduced performance of lamp may result. Clean lamp aer handling.
e UV lamp contains a small quantity of mercury. If a lamp breaks, clean and dispose of with care.
Use only specied replacement lamps with your unit. Use of an incorrect lamp can result in damage
to the unit and/or lamp and will also void the warranty.
When applicable local regulations comprises more restrictive installation and/or certication requirements,
the aforementioned requirements prevail on those of this document and the installer agrees to conform to these
at his own expense.
3
When performing installation, servicing or cleaning the UV purier, it is recommended to wear safety glasses
and gloves.
NOTICE
UV lamp can be disposed / recycled aer use as any other uorescent lamp.
Contact and follow your local and national authorities’ specic instructions.
WARRANTY
e warranty applicable to the dierent components included in your purchase are as per the table below:
Component Warranty
UV lamp 3 years
Ballast 3 years
Electronics (circuit board) 3 years
Make sure to keep a copy of your proof of purchase in order for the warranty to be valid.
Loading...