Sanus Systems Sanus VisionMount VMAA18 Product Manual
VMAA18
(6901-100016 <04>)
Thank you for choosing the Sanus VMAA18 wall mount. The Sanus VMAA18 wall mount is
designed to support a monitor sized up to 50 in. (127cm) and weighing up to 59 kg (130
lbs). The mount is adjustable; it will tilt +5° to -15°, swivel to ±90°, and roll ±6.°
WARNING
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
This product is designed for use in wood stud walls only! The wall must be capable of
supporting up to ve times the weight of the monitor and mount combined. If you
have any doubts about the ability of the wall to support the monitor, contact Sanus
Customer Service, or a qualied contractor.
Do not use this product for any purpose not explicitly specied by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety
of the installation, contact Sanus Customer Service. Sanus is not liable for injury or
damage caused by incorrect installation or use.
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
US Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com
CAUTION
CAUTION
©2008 Milestone AV Technologies
3/16 in.
5/16 x 2.5 in.
1/4-20 x 2.0 in.
1/4-20
5/16-18 x 1 in.
M4 x 12mm
M5 x 12mm
M6 x 12mm
M8 x 16mm
M4 x 30mm
M5 x 30mm
M6 x 35mm
M8 x 40mm
M8
M6 / M8
M4 / M5
M6 / M8
M4 / M5
5/16 in.
Supplied Parts and Hardware
Before starting assembly verify all parts are included and undamaged If any parts are missing or damaged do not return the item
to your dealer; contact Sanus Customer Service Never use damaged parts!
[06] x 4
[11] x 4
[01] x 1 [02] x 1
[07] x 4
[12] x 4
[13] x 4
[08] x 2
[14] x 4
[03] x 2
[04] x 2
[09] x 10
[15] x 4
[05] x 4
[10] x 1
[16] x 2
[17] x 4M4[18] x 4M5[19] x 4M6[20] x 4
[24] x 4
[28] x 8
[29] x 4
[25] x 4
[21] x 4
[30] x 4
[26] x 4
[22] x 4
7/32 in.
[31] x 1
[23] x 4
[27] x 4
3/16 in.
[32] x 1
6901-100016 <04>
1: Attach Brackets to Monitor
001429.eps
FPM70-Brackets not level
OPT
OPT
For Monitors with a Flat Back
[11], [12],
[13], [14]
[17], [18],
[19], [20]
[28], [29]
[03]
4x
[28]
[22], [23]
For Monitors with a Curved Back or Obstruction
[11], [12],
[13], [14]
[17], [18],
[19], [20]
[28], [29]
[03]
4x
Use washer [28] with M4 or M5
hardware only.
6901-100016 <04>
Loading...