Sanus WSSA1, WSSA2 Instruction Manual

Page 1
Sonos® One
Sonos® PLAY:1
Sonos® PLAY:3
Sonos® PLAY:3
WSS
A1 / WSSA2
SPEAKER STAND
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
Page 2
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this product is perfect for you!
This stand is designed to support only Sonos
®
One™, PLAY:1™ and PLAY:3
speakers.
CAUTION: Avoid potential personal injuries and property damage!
Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Do not use this product for any purpose not explicitly specifi ed by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at 1-800-359-5520.
Speaker Weight Limit
7 lbs.
DO NOT EXCEED
Tool Needed
(3.1 kg)
Screwdriver
2
Page 3
Dimensions
TOP VIEW
11.00
279.4
FRONT VIEW
24.66
626.4
PLAY:1™ SPEAKER BRACKET
10.90
276.9
ONE™
SPEAKER BRACKET [
with PLAY:1™
BRACKET]
ADJUSTABLE RANGE
PLAY:3™ VERTICAL SPEAKER BRACKET
42.00
1066.8
25.00
635.0
PLAY:3™ HORIZONTAL
SPEAKER BRACKET
3
Page 4
M6 x 20mm
M6
M6 x 20mm
1/4-20 x 5/8 in.
M5 x 15mm
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Quantities shown are for one speaker stand.
STEP 2 STEP 3 STEP 4
11
x1
x1
01
]
PLAY:1™ Bracket
x1
09
PLAY:3™ Horizontal Bracket
12
ONE™ Bracket
Speaker Screw
x1
10
13
x1
x1
Base
02
x1
Lock Washer
03
x2
Rubber Pad
05
OPTIONAL
x4
[Attached to
Bracket Screw
08
PLAY:3™ Vertical Bracket
STEP 5 Adjustments
Shaft
x1
01
4
Shaft Screw
04
x2
Carpet Spike
x4
06
Jam Nut
07
x4
14
Clip
x4
Trigger Button
x1
15
Page 5
STEP 1
Route Power Cables
STEP 2
Attach Base to Shaft
Ethernet
(if needed)
02
01
02
03
04
5
Page 6
STEP 3
Install Rubber Pads -or- Carpet Spikes
Rubber Pads
Twist rubber pads
05
into the base
05
Optional Carpet Spikes
02
.
OR
HEIGHT ADJUST
===
07
06
WARNING:
The ends of carpet spikes
06
are sharp and may scratch flooring, damage wiring, or be hazardous to children.
02
07
02
06
6
Page 7
STEP 4
Attach Speaker to Shaft
Based on your speaker model, follow the correct STEP 4.
Sonos
®
One
Sonos
®
STEP 4A STEP 4B
PAGE 8 PAGE 9
PLAY:1
Sonos
®
PLAY:3™
Sonos
Horizontal InstallationVertical Installation
STEP 4C
VERTICAL
HORIZONTAL
®
PLAY:3™
STEP 4D
PAGE 10 PAGE 11
7
Page 8
STEP 4A
Install Speaker One
ETHERNET (if needed)
08
09
09
08
10
09
10
8
Page 9
STEP 4B
Install Speaker PLAY:1
ETHERNET (if needed)
09
13
09
9
Page 10
STEP 4C
Install Speaker PLAY:3™ — VERTICAL
09
13
08
10
08
11
01
ETHERNET (if needed)
10
Page 11
STEP 4D
Install Speaker PLAY:3™ — HORIZONTAL
09
08
10
08
13
12
01
ETHERNET (if needed)
11
Page 12
Height Adjustment
RAISE
PLAY:3
(HORIZONTAL)
PLAY:3 shown
01
LOWER
CAUTION:
Avoid potential personal injuries and property damage!
Hold upper post pressing trigger button
Trigger button to prevent accidental lowering, or to route cables into post (STEP 5).
01
BEFORE
15
is removable
PLAY:3 shown
01
15
15
.
01
HOLD
1 2
PRESS
3
LOWER
09
11
PLAY:3
09
11
ONE
PLAY:1
PLAY:3
(VERTICAL)
12
ONE PLAY:1 PLAY:3
(VERTICAL)
(HORIZONTAL)
15
Page 13
STEP 5
Secure Cables
4X
15
PLAY:3 shown
14
14
13
Page 14
ESPAÑOLESPAÑOL
INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
Antes de comenzar, verifi quemos que este producto sea el ideal para sus necesidades.
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
● Consulte el manual del usuario de su altavoz para ver si existe algún requisito especial para instalar su altavoz en la pared.
● Lea estas instrucciones en su totalidad para sentirse seguro y cómodo con este fácil proceso de instalación.
● No utilice este producto para ningún otro propósito que no sea el explícitamente especifi cado por el fabricante.
● El fabricante no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o del uso indebido.
● Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto, póngase
en contacto con el servicio de atención al cliente al 1-800-359-5520.
Los soportes para altavoces fueron concebidos para sostener altavoces Sonos® One™, PLAY:1™ y PLAY:3™, exclusivamente.
Peso máximo
NO EXCEDAS
3,1 kg
(7 lbs.)
herramienta necesaria
Destornillador
Dimensiones (consulte la página 3)
Piezas y elementos de sujeción (consulte la página 4)
ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
NOTA: No todos los elementos de sujeción incluidos deberán utilizarse.
14
Las cantidades que se muestran corresponden a un soporte para altavoces.
Page 15
ESPAÑOL
ESPAÑOL
Pasar el cable de alimentación de los altavoces (consulte la página 5)PASO 1
PASO 2
PASO 3
ALMOHADILLAS DE AISLAMIENTO DE GOMA - Gire las almohadillas de aislamiento de goma PUNTAS OPCIONALES PARA ALFOMBRAS - PRECAUCIÓN: Los extremos de las puntas para alfombras
cableado o ser peligrosos para los niños.
PASO 4
Basándose en el modelo de su altavoz, siga el PASO 4 correcto.
PASO 4A PASO 4B PASO 4C PASO 4D
Ajustar la base en el tubo (consulte la página 5) Instalar las almohadillas de aislamiento de goma o las puntas para alfombras (consulte la página 6)
05
hacia la base
Instalar el soporte del altavoz (consulte la página 7)
Instalar el altavoz Instalar el altavoz Instalar el altavoz Instalar el altavoz
One PLAY:1™
PLAY:3™ HORIZONTAL (consulte la página 10) PLAY:3™ VERTICAL
(consulte la página 8)
(consulte la página 9)
Ajuste de Altura (consulte la página 12)
BAJAR
SUBIR
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
Sostenga la parte superior del poste El botón del disparador
MANTENER
1 2
15
01
ANTES de presionar el botón del disparador
es desmontable para evitar el descenso accidental, o para pasar los cables en el interior del poste
PRESIONAR
3
BAJAR
02
.
06
son puntiagudos y podrían rayar el suelo, dañar el
(consulte la página 11)
15
.
01
(PASO 5).
PASO 5
Jalar los cables (consulte la página 13)
15
Page 16
Thank you for choosing SANUS! Please take a moment to let us know how we did:
Call us: 1-800-359-5520
Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.
©2017 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone. All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
Email us: info@sanus.com Leave a review: sanus.com
6901-602159 00
Loading...