Sanus VSF415B1 User Manual

VSF415 INSTRUCTION MANUAL

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520. We’re ready to help!

Scan for easy install video

http://san.us/403

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you!

Does your TV weigh more than 50 lb (22.7 kg) including accessories?

50 lb

(22.7 kg)

NOTE: The VSF415 adjustable arm wall mount is designed to be used with the LR1A in-wall mount.

What is your wall made of?

No — Perfect!

Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to ﬁ nd a compatible mount.

Drywall with wood studs

Do you have all of the tools needed?

Perfect!

Solid concrete or concrete block

Perfect!

Unsure?

Call 1-800-359-5520 (UK: 0800-056-2853)

3/8 in.

(10 mm)

Concrete

1/2 in.

(13 mm)

Ready to begin?

7/32 in.

(5.5 mm)

Wood

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

CAUTION: Avoid potential personal injuries and property damage!

● This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

● The wall must be capable of supporting ﬁ ve times the weight of the TV and mount combined

● Do not use this product for any purpose not explicitly speciﬁ ed by manufacturer

● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

STEP 1 Attach Bracket to TV

Parts and Hardware for STEP 1

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

TV Bracket

M4 x 12mm

TV Screws

M4 x 30mm

M6 x 12mm

M8 x 12mm

TV Washers TV Spacers

M4 M6/M8

M6 x 20mm M6 x 35mm

M8 x 20mm

M8 x 35mm

M6/M8

1-1 Select TV Screws

1-2 Spacers

Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use.

CAUTION: Verify adequate thread engagement of the screw/

spacer combination on your TV.

Too short will not hold the TV and too long will damage the TV.

Your TV type will help you determine which hardware conﬁ guration to use. Match your type of TV to the suggested hardware conﬁ guration on the next page.

A. Installation option without spacers (TVs with ﬂ at backs). B. Installation option using spacers (TVs with obstructed backs

or inset mounting holes).

TV Bracket

Round Back CablesInset HolesFlat Back

TV Bracket

Too Short Correct Too Long

1-3 Attach TV Bracket

Position the TV bracket your TV.

over your TV hole pattern and install using the screw, washer, and spacer (if needed) combination you selected for

M4/M6/M8 screw and washer

0210041105 07

M4 spacer, screw, and washers

12 10

M6/M8 spacer, screw, and washer

06 09

0310

STEP 2 Attach Wall Plate to Wall

For wood stud installations, follow STEP 2A on PAGE 7 For concrete installations, follow STEP 2B on PAGE 9

Parts and Hardware for STEP 2

WARNING: This product contains small items that could be a choking hazard if swallowed.

Sanus Magnetic Stud Finder

NOTE: Not all hardware included will be used.

Arm Assembly/Wall PlateWall Plate

Template

Lag Bolts

Lag Bolt Washers

5/16 x 2 ¾ in.

Concrete Anchors

Covers

STEP 2A

Wood Stud Option

CAUTION: Avoid potential personal injuries and

property damage!

● Drywall covering the wall must not exceed 16 mm (5/8 in.)

● Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.)

● Stud center must be verified

NOTE: See Introducing Sanus Magnetic Stud Finder*

located in your Welcome folder for more detailed operation of stud ﬁ nder.

1. Locate a nail/screw in the stud using the Sanus magnetic stud ﬁ nder 16 provided.

2. Find the edges of the stud using the probe of the stud ﬁ nder 16.

3. Mark the center of the stud with pencil.

Max. 16 mm

(5/8 in.)

Min. 89 mm

Min. 38 mm

(1 1/2 in.)

(3 1/2 in.)

* WARNING: This product contains a magnet. If an implanted medical device such as a pacemaker or implantable cardioverter deﬁ brillator (ICD) is in use, magnetic ﬁ elds may a ect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product.

4. Place the wall plate template 14 at your desired height and position the slotted holes over your stud center line. Level the wall plate template 14 and tape in place.

NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.

IMPORTANT: Be sure you mark and drill into the center of the stud.

5. Drill the two pilot holes using a 5.5 mm (7/32 in.) diameter drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.).

6. Remove the wall plate template 14. Tighten lag bolts 17 only until the washers 18 are pulled ﬁ rmly against the wall plate 15.

CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage Do not over-

tighten the lag bolts 17. Fit lag bolt covers 20 over lag bolts 17.

4 5

75 mm

(3 in.)

5.5 mm

(7/32 in.)

+ 16 hidden pages