Sanus FLAT PANEL TV RAILS User Manual

Assembly Instructions for Flat Panel TV Rails

These Assembly Instructions are required only if you are going to mount a Flat Panel TV to your piece of JAVA Furniture using the VMPL or VMPL2 Universal Wall Mount from Sanus Systems. If you have any questions regarding this or any other Sanus Systems product, please contact us at 800.359.5520 or visit us at www.sanus.com. Our customer service representatives can assist you quickly with any issues regarding assembly or missing parts. Check carefully to make sure none of the parts are missing or defective. Never use defective parts. Replacement parts for products purchased from an authorized dealer will be shipped directly to you. Please call Sanus Systems before returning products to retail stores.

Required Tools: Phillips Screw Driver.

Required Parts and Hardware:

(4)	M8	Bolt - a	(4)M8 Lock Washer - c	(1) Wall Plate - e*
(4)	M8	Nut - b	(2) Mounting Rail - d

*Packaged with the VMPL or VMPL2

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.11.04 Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Step 1:

Attach the Mounting Rails (d) to the assembled piece of Java Furniture by sliding the holes in the Rail over the Rail Bolts as seen in the Detailed View of Diagram 1. Once the Rail Bolt is through the hole on the Mounting Rail, let the bottom of the rail rest on the ﬂoor as shown in Diagram 1. Proceed to tighten the Rail Bolts with a phillips screw driver so the Mounting Rails are secured!

Diagram 1	Detailed View
d	Rail Bolt

Step 2:

Attach the Wall Plate (e) to the Mounting Rails (d) by threading an M8 Bolt (a) through an M8 Lock Washer (c), the Wall Plate, a hole in the Mounting Rails, and into an M8 Nut (b) as shown in the Detailed View of Diagram 2. The different holes in the Mounting Rails determine the height of your television. Repeat process until the Wall Plate is connected to the Mounting Rails as seen in Diagram 2. Tighten the Screws with a phillips screw driver until tight.

Diagram 2	Detailed View
	e	c	a

Note: Furniture should be located in its ﬁnal position before mounting the TV to the Wall Plate. Sanus does not recommend moving the furniture with equipment inside or a television that is mounted.

Step 3: For Assistance with how to mount the Monitor Brackets to your Flat Panel TV, see the assebmly instructions for the VMPL Universal Wall Mount.

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.11.04 Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com