Page 1
Assembly Instructions for Model: EFAV-IIg
Thank you for choosing the Sanus Systems Model EFAV-IIg. Every effort has
been made to ensure that your Sanus Systems furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
800-359-5520 or at www.sanus.com. We can quickly help with any issues
regarding assembly or missing parts. Replacement parts for Sanus systems
products purchased through authorized dealers will be shipped directly to you.
Supplied Parts List: (Threaded fasteners are shown full size.)
Top Bolt - F
Qty. 5
8" Pillar - A
Qty 5
Metal Base - D
Qty. 1
3" Cope Tube - B
Pan Head Bolt - G
Qty. 5
Qty. 4
Angled Center Support - C
Qty. 1
Video Shelf - E
Qty. 2
Shelf Connector - H
Qty. 4
Floor Glide - I
Qty. 5
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Washer - J
Qty. 5
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.13.06 (100008)
Tube Spacer - K
Qty. 14
Allen Key - L
Qty. 1
Page 2
Step 1 - Attach Floor Glides to Metal Frame
Thread the ve Floor Glides (I) into the Metal Base (D).
I
I
Diagram 1
D
I
I
Step 2 - Attach 3" Cope Tubes to Metal Base
Place a Pan Head Bolt (G) through each of the four holes in the Metal Base (D); then, thread them into the four 3˝ Cope
Tubes (B). Do not tighten the Pan Head Bolts (G) until the entire EFAV-IIg is assembled.
Place a Tube Spacer (K) on each 3" Cope Tube (B) with the small lip facing up (See Detail A).
Diagram 2
K
B
Detail A
Small
Lip
I
K
G
G
D
B
G
Page 3
Step 3 - Place a Video Shelf on the Metal Base
Align four holes in a Video Shelf (E) with the small lip of the Tube spacers (K) placed on the 3" Cope Tubes (B) in Step 2
(See Detail B); then, place the Video Shelf onto the 3" Cope Tubes.
Diagram 3
E
Small Lip
must t into
hole of
Video Shelf
K
B
Detail B
Step 4 - Secure the Angled Center Support to the Video Shelf
NOTE: Make sure the coped end of the Angled Center Support (C) ts over the Metal Base (D).
Attach the Angled Center support (C) to the bottom of the Video Shelf (E) by threading a Pan Head Bolt (G) up through the
Angled Center Support, the Video Shelf (E); then, place a Tube Spacer (I) —with the small lip facing out— on each end a
8” Pillar (A), and thread the Pan Head Bolt into the 8" Pillar.
K
A
K
B
K
G
E
C
D
Page 4
Step 5 - Attach 8" Pillars
Screw a Shelf Connector (H) into each of the 3" Cope Tubes (B); then, place a Tube Spacer (K) —with the small lip facing
out— onto each end of four 8" Pillars (A).
Screw the 8" Pillars (A) with Tube Spacers (K) onto the Shelf Connectors (H).
Diagram 5
K
K
A
K
A
H
K
H
NOTE
If you are installing additional shelves, refer to the Assembly Instructions for Model: EFVS-IIg.
Step 6 - Secure Video Shelf to 8" Pillars
Place the next Video Shelf (E) on the 8" Pillars (A); then, using the Allen Key (L) and ve Top Bolts (F) plus Washers (J) ,
secure the Video Shelf to the 8˝ Pillars.
Tighten the Pan Head Bolts (G) used to attach the Metal Base (D) to the 3" Cope Tubes (B) in Step 2.
Diagram 6
F
J
E
G
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.13.06 (100008)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
G
Loading...