Sanus EFAS IIG User Manual

Assembly Instructions for Model: EFAS-IIg

Thank you for choosing the Sanus Systems Model EFAS-IIg. Every effort has been made to ensure that your Sanus Systems furniture is perfect. If you have questions or feel that there is a problem of any kind, please contact us at 800-359-5520 or at www.sanus.com. We can quickly help with any issues regarding assembly or missing parts. Replacement parts for Sanus systems products purchased through authorized dealers will be shipped directly to you.

Supplied Parts List: (All threaded fasteners are shown full size.)

8˝ Pillar - A

Qty. 4

Audio Shelf - B

Qty. 1

Shelf Connector - D

Glass Protector - C Qty. 4

Qty. 8

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.13.06 (100019) Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

NOTE: Step 1 is necessary only if the EFAB-IIg assembly has been previously completed.

Step 1 - Remove existing Top Bolts and Washers

Remove the four Top Bolts and Washers securing the Audio Shelf.

	Diagram 1
Top Bolt
Washer	Top Bolt
	Washer

Audio Shelf

Step 2 - Install Shelf Connectors, Glass protectors, and 8˝ Pillars

Thread a Shelf Connector (D) securely into the four 3˝ Cope Tubes.

Place a Glass Protector (C) — with the small rib facing up — on each of the 8˝ Pillars (A); then, screw the 8˝ Pillars with glass Protectors onto the Shelf Connectors (D).

Diagram 2

C

A

C

D