Sanus AFSg User Manual
Assembly Instructions for Model: AFSg
Thank you for choosing Sanus Systems Accurate Furniture. Every effort has been made to ensure that your Sanus furniture is perfect. If you have questions or feel that there is a problem of any kind, please contact us at 800-359-5520 or www.sanus.com. We can quickly help with any issues regarding assembly or missing parts. Replacement parts for Sanus products, purchased through authorized dealers will be shipped directly to you.
Supplied Parts and Hardware:
Shelf Connector - B
Qty 4 Glass Protector - C
Qty 8
9” Pillar - A
Qty 4 Shelf - D
Qty 1
Step 1- Remove existing Top Shelf and Glass Protectors
Remove the four Top Bolts and Bolt Washers; then, gently lift the Top Shelf off and place it in a safe location.
Remove the four Glass Protectors
Diagram 1
Top Bolt
& Washer
Top
Shelf
Glass
Protector
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 1.16.06 (100005) Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Step 2 - Install Shelf Connectors and 9” Pillars
Hand thread a Shelf Connector (B) into each of the four existing 9” Pillars; then, install the Glass Protector removed in Step 1, making sure the small lip is facing up.
Place the new Lower Shelf (D) onto the four 9” Pillars.
Diagram 2
|
D |
Small lip |
|
must face up. |
|
B |
Glass Protector |
|
Removed in |
9” |
Step 1 |
Pillar |
|
Step 3 - Install new 9” Pillars and Glass Protectors.
NOTE: Glass Protectors (C) must be placed as shown in Diagram 3.
Place a new Glass Protector (C) over both ends of the four 9” Pillars (A); then, screw the 9” Pillars onto the threaded portion of the Leg Assembly.
Diagram 3
C
A
A
C 
Threaded portion of Leg Assembly
Loading...