Sanus AFS User Manual
Assembly Instructions for Accurate Furniture AFS
Thank you for choosing Sanus Systems Accurate Furniture. Every effort has been made to ensure that your Sanus fur
niture is perfect. If you have questions or feel that there is a problem of any kind, please contact us at 800.359.5520 or
www.sanus.com. We can quickly help with any issues regarding assembly or missing parts. Replacement parts for Sanus
products purchased through authorized dealers will be shipped directly to you.
Supplied Parts and Hardware:
(1) AFS Shelf (4) Shelf Connector (4) 9” Pillar (1) Wire Hole Bushing
1] Remove the 4 Top Bots from your existing AFA and take off the Top Shelf as shown in Figure 1.
2] Thread a Shelf Connector into each Pillar as shown in Figure 2.
3] Place the additional AFS Shelf down so that a Shelf Connector shows through each of the 4 corner holes as shown in
Figure 2.
-
4] Thread a 9” Pillar down onto each of the Shelf Connectors showing through the AFS shelf also shown in Figure 2.
5] Place the Top Shelf back onto the top of the stand. Thread each of the 4 Top Bolts down through the Top Shelf and into
each of the 9” Pillars as shown in Figure 3. Place the Wire Hole Bushing into the large hole in the AFS Shelf also shown
in Figure 3.
Top Shelf
Figure 1 Figure 2
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Top Bolt
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.17.04
9” Pillar
Shelf Connector
AFS Shelf
Figure 3Figure 2Figure 1
Wire Hole Bushing
Top Shelf
Top Bolt
Loading...