Page 1
Assembly Instructions for Model: AFDVg
Thank you for choosing the Sanus Model AFDVg. The AFDVg three
shelf audio stand is designed for basic systems. Every effort has
been made to ensure that your Sanus furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
800-359-5520 or at www.sanus.com. We can quickly help with any issues
regarding assembly or missing parts. Replacement parts for Sanus products
purchased through authorized dealers will be shipped directly to you.
Supplied Parts List: (Threaded fasteners are shown full size.)
9” Pillar - A
Lower Shelf - D
Shelf Connector - F
Qty. 8
Qty. 8
Qty. 3
Top Bolt - G
Qty. 4
3” Pillar - B
Qty. 4
Top Bolt Washer - H
Qty. 4
Glass Protector - C
Qty. 20
Top Shelf - E
Qty. 1
Allen Key - I
Qty. 1
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.02.06 (100003)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Page 2
Step 1 - Assemble the four 3” Pillars
Hand thread one Shelf Connector (E) into each 3” Pillar (B).
Slide a Glass Protector (C) over each Shelf Connector as shown with the large ridge tting into the 3” Pillar.
Diagram 1
C
E
Large ridge
B
Step 2 - Insert four 3” Pillars into Lower Shelf
Insert the four Leg 3” Pillars from Step - 1 into one Lower Shelf (H).
Diagram 2
Small rib
must t
into hole
3” Pillar
NOTE:
On all installations,
small rib must t
into holes in Shelf
H
3” Pillar
Page 3
Step 3 - Assemble four 9” Pillars
Hand thread one Shelf Connector (E) into four of the 9” Pillars (A).
Diagram 3
E
A
Step 4 - Assemble Lower Shelves
NOTE: Glass Protectors (C) Must be placed as shown in Diagram 4.
Place a Glass Protector (C) over both ends of four 9” Pillars (A) with Shelf Connectors (E); then, hand thread the 9” Pillars
onto the threaded portion of the Leg Assemblies.
Place a Lower Shelf (H) onto the four 9’’ Pillars.
Place a Glass Protector (C) over both end of four 9” Pillars (A) without Shelf Connectors (E); then, hand thread the 9” Pillars
onto the threaded portion to the 9” Pillars.
Diagram 4
C
A
C
A
C
A
C
H
C
A
E
H
C
C
H
A
E
A
C
H
Page 4
Step 5 - Add Top Shelf
Place the Top Shelf (G) on the 9” Pillars (A), making sure the small rib on each Glass Protector (C) ts into the holes of
the Top Shelf.
Using the four Top Bolt Washers (D) and Top Bolts (F), secure the Top Shelf (G) to the four 9” Pillars (A).
Diagram 5
F
D
Small rib
must t
into hole
G
A
C
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.02.06 (100003)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Loading...