Santec VOGUE Series, 6562VO Series, 6560VO Series, 6560VO10, 6561VO10 Instruction Booklet
...
VOGUE COLLECTION
30”, 24”, & 18” TOWEL BAR
MODEL: (30”) 6560VO10, 6560VO__
(24”) 6561VO10, 6561VO__
(18”) 6562VO10, 6562VO__
3
Ø2
"
8
PARTS BREAKDOWN
3
Ø2
"
8
3
Ø2
"
8
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
01
#
DESCRIPTION
1
30” Towel Bar *
24” Towel Bar *
18” Towel Bar *
Towel Bar Post- Left * PA-2925L
2
3
Towel Bar Post- Right *
Accessories Bell * PA-2200
4
* Please specify the nish when ordering the part.
PART #
PA-2930-U
PA-2924-U
PA-2918-U
PA-2925R
#
DESCRIPTION
5
#10-24 Set Screw
6
Flange *
Mounting Post
7
Drywall Screw PM-016
8
9
Toggle
Allen Key PM-033
10
PART #
PM-027
P00076
PM-960
PM-026
02
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
Place the trim parts against the assigned wall location. Make sure the bar is leveled and the bar post
1.
positions are correct. Mark with pencil the bar post ange positions and remove the trims.
WALL
Using the Allen key provided, remove the mounting posts from the bar posts. Press the mounting
2.
posts against bar post ange position on the wall and mark the screw hole positions.
INSTALLING ON WOODEN SURFACE
For wooden surface, the mounting posts can be
secured by screwing the screws directly into the wall.
Press the left bar post against the mounting post. Align the bar post and secure it by tightening the set
3.
screw.
Insert the towel bar into the secured bar post. Press the right bar post onto the right mounting post.
4.
Insert the right side of the towel bar into the right bar post. Align the right bar post and tighten the set
screw rmly.
Check both bar posts to make sure they are rmly secured. If not, tighten the set screws with the Allen
5.
key.
INSTALLING ONTO DRYWALL SURFACE
Using a drill, pre-drill holes for the anchors. Insert the
anchors into the wall. The mounting posts can be
secured by screwing the screws into the anchors.
INSTALLING ONTO A SOLID SURFACE
Measure the dimensions carefully. Using a drill,
pre-drill the holes. Secure the mounting posts by
screwing the screws into the wall.
03
04
Loading...