Santec DT3-KT-TM User Manual
KLASSICA COLLECTION
TRIM 2 WAY WALL MOUNT DIVERTER
TRIM 3 WAY WALL MOUNT DIVERTER
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
0 1
KLASSICA COLLECTION
TRIM 3 WAY WALL MOUNT DIVERTER FOR KL, KR, KT HANDLES
DT3-KL-TM
ITEM NUMBER
DT3-KR-TM
DT3-KT-TM
DT2-KL-TM
DT2-KR-TM
DT2-KT-TM
#
PART
DESCRIPTION
PART #
1
2
3
4
5
Complete Handle for PB Shower *
* Please specify the finish when ordering the part.
1
YY-KL, KR, KT
PH9721
2
Shower Trim Plate *
SA-3WAY
2 and 3 Way Diverter Valve
5
P0477
Adapter for Handle Flange
4
Washer
PM-400
3
KL
KR KT
KL
KR KT
0 2
DESCRIPTION
This product is precision engineered to provide satisfactory performance provided it is installed and operated in
accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the
reliability of your pressure balanced valve, be certain to familiarize yourself with the contents of this manual.
SPECIFICATIONS AND DIMENSIONS
Minimum operating pressure 20 psi
Maximum operating pressure 145 psi
Maximum test pressure 500 psi
Hot and cold water inlets Ω" IPS
Shower outlet Ω" IPS
Flow capacity 5 USGPM@ 50 psi
INSTALLATION
NOTE: Failure to follow these instructions may cause damage or improper operations and nullify the warranty.
ROUGH IN
- Make sure the water supplies are off.
- Remove all the trim items (plate, handle and flange) before installation.
- Secure the valve firmly against the stud. Make sure the Ω" shower outlet is in the up position.
- Make sure to flush or raise grouting on the tiled wall surface.
- Adjust the All Thread depth against the Teflon Washer and Limit Stop.
Screw the All Thread against the Teflon washer until it is pressured gently against each other.
- Tighten firmly the Lock Nut against the Lock Plate.
- Position the valve using the dimension shown in the illustration A.
INSTALLATION INSTRUCTIONS
DT2/DT3-KL, KR, KT_ _
FLANGE WASHER
HANDLE FLANGE
HANDLE BELL
HANDLE
Trim Plate
ILLUSTRATION A
WALL LINE
46"
78"
(1981 mm)
FLOOR
LINE
3.25Ó
All Thread
Stem
Lock Nut
Lock Plate
center of inlet
finished wall
FLANGE ADAPTER
Loading...