Santec 9531KT-TM User Manual

KLASSICA COLLECTION

PRESSURE BALANCED

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.

0 1

KLASSICA COLLECTION
PRESSURE BALANCED SHOWER FOR KL, KR, KT HANDLES

LESS SHOWER HEAD, ARM AND FLANGE

9531KL-TM_ _

ITEM NUMBER

9531KR-TM_ _
9531KT-TM_ _

#

PART

DESCRIPTION

PART #

1

2

3
4
5

Complete Handle for PB Shower *

* Please specify the finish when ordering the part.

1

YY-KL, KR, KT

PH9718

2

Shower Trim Plate *

PB-3800

Pressure Balanced Shower Valve

5

P0477

Adapter for Handle Flange

4

Washer

PM-400

3

0 2

DESCRIPTION

This product is precision engineered to provide satisfactory performance provided it is installed and operated in
accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the
reliability of your pressure balancing valve, be certain to familiarize yourself with the contents of this manual.

SPECIFICATIONS AND DIMENSIONS

Minimum operating pressure 20 psi
Maximum operating pressure 145 psi
Maximum test pressure 500 psi

Hot and cold water inlets Ω" IPS

Shower outlet Ω" IPS

Flow capacity 5 USGPM@ 50 psi
Finished wall adjustment : see Illustration A

INSTALLATION

NOTE: Failure to follow these instructions may cause damage or improper operations and nullify the warranty.

ROUGH IN

- Make sure the water supplies are off.

- Remove all the trim items (plate, handle and flange) before installation.

- Secure the valve firmly against the stud. Make sure the Ω" shower outlet is in the up position.

- Make sure to flush or raise grouting on the tiled wall surface.

- Adjust the All Thread depth against the Teflon Washer and Limit Stop.
Screw the All Thread against the Teflon washer until it is pressured gently against each other.

- Tighten firmly the Lock Nut against the Lock Plate.

- Position the valve using the dimension shown in the illustration A.

INSTALLATION INSTRUCTIONS

9531KL, KR, KT_ _

FLANGE WASHER HANDLE FLANGE HANDLE BELL

HANDLE

Trim Plate

ILLUSTRATION A

WALL LINE

46"

78"

(1981 mm)

FLOOR

LINE

3.25Ó

All Thread

Stem

Lock Nut

Lock Plate

center of inlet

finished wall

FLANGE ADAPTER