Santec 8265RU User Manual

ITEM NUMBER
8265RU _ _-_ _
ALPINE/ ETNA COLLECTION TOILET PAPER HOLDER WITH SPRING LOADED BAR
LEFT ROLLER POST
ROLLERS
MOUNTING HARDWARE POST (2)
MOUNTING SCREWS (4)
DRY WALL TOGGLES(4)
ALLEN KEY
RIGHT ROLLER POST
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
PAGE 01
INSTALLATION INSTRUCTIONS
1- Take the trim parts off the box. Place the trim parts against the assigned wall location. Make sure that the roller is leveled and the roller post positions are correct. Leave 5’ to 5-1/4” space between the roller posts for the rollers. Mark the roller post flange positions and remove the trims.
2- Using the mounting hardware post as reference, mark the screw hole positions in the center of the post flange mark on the wall.
2a- INSTALLING ON WOODEN SURFACE
- For wooden surface, the mounting hardware posts can be secured by screwing the screws directly into the wall.
2b- IF INSTALLING ON A DRYWALL
- Using a drill, pre-drill holes for the toggles.
- Fold the toggle’s leg and insert it into the wall.
- The mounting hardware posts can be secured by screwing the screws into the toggles.
8265RU _ _
5” ~ 5 1/4
WALL
WOODEN SURFACE
DRY WALL SURFACE
2c- IF INSTALLING ON A SOLID/HARD SURFACE
- Measure the dimensions carefully.
- Using a drill, pre-drill the holes.
- Secure the mounting hardware posts by screwing the screws into the wall.
3- Using the Allen key provided, loosen the roller posts’ set screws. Slip the left roller post onto the left mounting hardware post Align the roller post and secure it by tightening the set screw.
4- Insert the rollers with the spring onto the secured roller post. Slip the right roller post onto the right mounting hardware post. Insert the right side of the rollers into the right roller post. Align the roller post and tighten the set screw firmly.
5- Check both roller posts to make sure they are firmly secured. If not, tighten the set screws with the Allen key.
HARD SURFACE
Santec Inc.
3501 Challenger Street, Torrance, CA 90503 Tel: (310) 542-0063 Fax (310) 542-5681 www.santecfaucet.com
05/03
PAGE 02
Loading...
+ 1 hidden pages