Santec 8068WT User Manual

MODENA COLLECTION
WIRE TRIANGLE CORNER SOAP DISH

ITEM NUMBER

8068WT _ _-_ _

TO WALL

6”

9 ¾”

MOUNTING SCREWS (2)

DRY WALL TOGGLES(2)

DRY WALL TOGGLES(2)

TO WALL

WIRE TRIANGLE CORNER SOAP BASKET

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

1- Take the TRIANGULAR wire soap dish off the box.
Place the unit against the assigned wall location.
REMEMBER THIS SOAP DISH FITS IN THE CORNER OF THE TWO WALLS,
WHICH ARE PERPENDICULAR TO EACH OTHER.
Mark the unit’s hole position.

2- Using the mounting hardware post as reference, mark the screw hole positions.
Make sure the two holes are horizontal and in line.

2a- INSTALLING ON WOODEN SURFACE

- For wooden surface, the mounting hardware post can be secured by
screwing the screws directly into the wall.

2b- IF INSTALLING ON DRYWALL

- Using a drill, pre-drill holes for the toggles.

- Fold the toggle’s leg and insert it into the wall.

- The mounting hardware post can be secured by screwing the screws
into the toggles.

2c- IF INSTALLING ON SOLID/HARD SURFACE

- Measure the dimension carefully.

- Using a drill, pre-drill the holes.

- Secure the square wire soap dish by screwing the screws into
the wall through the holes..

8068WT _ _

WOODEN SURFACE

DRY WALL SURFACE

HARD SURFACE

3- firmly tighten all four screws.

Santec Inc.

3501 Challenger Street, Torrance, CA 90503
Tel: [phone] Fax [phone]
www.santecfaucet.com

05/03

PAGE 02