Santec 8068WR User Manual

MODENA COLLECTION
WIRE SQUARE SOAP DISH BASKET

¾”

9

MOUNTING SCREWS (2)

ITEM NUMBER

8068WR _ _-_ _

SQUARE WIRE ROAP BASCKET

6”

DRY WALL TOGGLES(2)

TO WALL

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

1- Take the square wire soap dish off the box.
Place the unit against the assigned wall location.
Mark the unit’s hole position.

8068WR _ _

2- Using the mounting hardware post as reference, mark the screw hole positions.
Make sure the two holes are horizontal and in line.

2a- INSTALLING ON WOODEN SURFACE

- For wooden surface, the mounting hardware post can be secured by
screwing the screws directly into the wall.

2b- IF INSTALLING ON DRYWALL

- Using a drill, pre-drill holes for the toggles.

- Fold the toggle’s leg and insert it into the wall.

- The mounting hardware post can be secured by screwing the screws
into the toggles.

2c- IF INSTALLING ON SOLID/HARD SURFACE

- Measure the dimension carefully.

- Using a drill, pre-drill the holes.

- Secure the square wire soap dish by screwing the screws into
the wall through the holes..

3- firmly tighten the two screws.

WOODEN SURFACE

DRY WALL SURFACE

HARD SURFACE

Santec Inc.

3501 Challenger Street, Torrance, CA 90503
Tel: [phone] Fax [phone]
www.santecfaucet.com

05/03

PAGE 02