Santec 7094TD User Manual

ITEM NUMBER

7094TD _ _-_ _

MODENA COLLECTION

3/4” THERMAX THERMOSTATIC VALVE AND TRIM WITH “TD” STYLE HANDLE

9¼”

H

12

2

4

1

3

6

11

105110055100110000959955

5

7

1
2
3
4
5
6
7
8
9
10
11
12
13

13

8

9

Part Description Part #

Complete Thermostatic valve
Service Valve*
Valve Cylinder*
Cartridge Only
Temperature Limiter
Trim Plate*
O-Ring
Handle Trim Base*
Allen Wrench, Medium
Lever Sub Assembly, TD Style*
Trim Plate Screw*
Rubber Flange Washer
TX Style Cross Handle Assembly

9

10

TH-5534
TH007
PH-2603
TH010
TH020
PH-29000
PM-475
PH-2601
PM-033
PH-2735
PM-255
PM-400
00YY-TX

C

* Please specify the finish when ordering the part.

6½”

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

Rough installation

- Turn the water supplies off.

Finished wall

Minimum and
Maximum Lines

-

Max

Min

- Remove all the trim items (plate and handle) before
installation.

- Secure the valve firmly against the stub.

- Make sure that the shower out let is in the up position.

- Flush or raise grouting on the tiled wall surface.

- Connect the supply lines to the valve inlets.

- The rough depth must fall within the minimum/

maximum range lines marked on the plaster guard.

- For both functional and esthetic reasons, the valve must
be leveled horizontally.

- When soldering the inlet connection, make sure that all
internal parts are removed to avoid damages to the non­ metal parts.

7094TD _ _

- If only the shower portion of the valve will be used, keep
the tub outlet plugged at all time.

Trim installation

1.

Max

Min

- Remove the screws from the plaster
guard.

- Remove the plaster guard.

PAGE 02