Santec 7093YC User Manual

ITEM NUMBER

7093YC_ _-_ _

LEAR CRYSTAL COLLECTION

3/4” THERMAX THERMOSTATIC VALVE AND TRIM WITH “YC” CRYSTAL HANDLE

105110055100110000959955

* Please specify the finish when ordering the part.

Part Description Part #

1

Complete Thermostatic valve

2

Service Valve*

3

Valve Cylinder*

7”

H

9”

C

4

Cartridge Only

5

Temperature Limiter

6

Trim Plate*

7

O-Ring

8

Handle Trim Base*

9

Allen Wrench, Medium

10

Crystal Lever, YC Handlle*

11

Trim Plate Screw*

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

TH-5034
TH007
PH2603
TH010
TH020
PH29000
PM-475
PH2601
PM-033
PH2485
PM-255

PAGE 01

INSTALLATION INSTRUCTIONS

Rough installation

- Turn the water supplies off.

Finished wall

Minimum and
Maximum Lines

-

Max

Min

- Remove all the trim items (plate and handle) before
installation.

- Secure the valve firmly against the stub.

- Make sure that the shower out let is in the up position.

- Flush or raise grouting on the tiled wall surface.

- Connect the supply lines to the valve inlets.

- The rough depth must fall within the minimum/

maximum range lines marked on the plaster guard.

- For both functional and esthetic reasons, the valve must
be leveled horizontally.

- When soldering the inlet connection, make sure that all
internal parts are removed to avoid damages to the non­ metal parts.

7093YC_ _- _ _

- If only the shower portion of the valve will be used, keep
the tub outlet plugged at all time.

Trim installation

1.

Max

Min

- Remove the screws from the plaster
guard.

- Remove the plaster guard.

PAGE 02