Santec 7093CU-TM User Manual

PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE BEGINNING THE INSTALLATION.

COLLECTION

T HE R MO S TAT IC C ONT R OL

This is a general installation instruction
for the following collections:
* AVA * AVA CRYSTAL

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

Rough installation

- Turn the water supplies off.

Finished wall

Minimum and
Maximum Lines

-

Max

Min

- Remove all the trim items (plate and handle) before
installation.

- Secure the valve firmly against the stub.

- Make sure that the shower out let is in the up position.

- Flush or raise grouting on the tiled wall surface.

- Connect the supply lines to the valve inlets.

- The rough de pth must fall within the m inimum/

m aximum range lines mar ked on the plas ter guard.

- For both functional and esthetic reasons, the valve must
be leveled horizontally.

- When soldering the inlet connection, make sure that all
internal parts are removed to avoid damages to the non­ metal parts.

Thermostatic control

- If only the shower portion of the valve will be used, keep
the tub outlet plugged at all time.

Trim installation

1.

Min

Max

- Remove the screws from the plaster
guard.

- Remove the plaster guard.

PAGE 02