Santec 6529VO-TM User Manual
VOGUE COLLECTION WALL MOUNT
WIDESPREAD WITH “VO” HANDLES
MODEL: 6529VO10-TM
6529VO__-TM
PARTS BREAKDOWN
9
8
6
7
5
4
1
2
3"
3
3
"
16
3
Ø2
"
16
5
7
"
16
5
5
"
16
7
3
"
Ø2
3
"
16
16
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
13
3
12
10
#
Description
1
Quick Connect
2
O-ring
3
Set Screw
4
O-ring
5
1.5 GPM Flow Restrictor
6
Flow Restrictor Housing
7
O-ring
8
Wall Mount Handle *
* Please specify the nish when ordering the part.
Part #
KQ-5400S
PM-953
PM-027
PM-613
PM-080
PM-823
PM-742
YY-VO
15
14
11
#
Description
9
Rubber Washer
10
Spout Base & Tube *
11
Wall Mount Adaptor
12
Decorative Lip * PS-2VO00-U-6-00
13
Set Screw PM-056
14
All Thread PM-955
15
20 Key Broach PM-007
16
Nut PM-956
Part #
PM-407
PS-6VO00-U-2
P0477
16
01
02
HANDLE TRIM (1) HANDLE TRIM (2)
Handle Trim Installation
NOTE: FOR ROUGH-IN SPECIFICATIONS AND MEASUREMENTS PLEASE
SEE SA-CORNER VALVE INSTALLATION INSTRUCTIONS.
Screw the nut onto the valve and lightly tighten using a 1” plumber’s socket.
Nut
Insert the broach into the valve. Then t the all thread over the broach and hand tighten
it into the nut until it bottoms out.
Handle Trim Installation
Make a mark on the all thread past the nish wall where the all thread should be cut,
according to the your handle style. See “Frontset” measurement chart on Page 5.
Un-thread the nut, all thread, and broach from the valve and then remove the broach
from the all thread.
Cut the excess at the mark on the all thread. Re-insert the broach into the all thread.
From the end of the newly cut all thread measure a distance of 1/2” on the broach and
make a mark. Cut the excess at the mark on the broach. See diagram below.
Re-thread the nut, all thread and broach back onto the valve and lightly tighten
assembly with a 1” plumber’s socket wrench.
Backset
2-1/8” - 4”
Finished Wall
Broach
Past All Thread
1/2”
03
Broach
All Thread
F
Past
Finish
Wall
04
Loading...