Santec 6129EX User Manual

PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE BEGINNING THE INSTALLATION.

*ACTUAL FAUCETS MIGHT BE DIFFERENT FROM THE ILLUSTRATOR.

COLLECTION

WALL MOUNT
WIDESPREAD

This is a general installation instruction
for the following collections:
* HERITAGE

SA-CORNER-L SA-CORNER-R

INSPECTED BY

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

Page 01

INSTALLATION INSTRUCTIONS

COLLECTION
WALL MOUNT WIDESPREAD

SPOUT INSTALLATION

Screw in the wall mount quick connect into the nipple sticking out from the wall. Make sure
the back panel of the quick connect is flush against the wall.
Note. The length of the nipple sticking out of the wall must be between 3/8” - 1/2”

Remove the flow restrictor inside the quick connect by unscrewing the retainer.

Flush the line to remove any debris inside.

Reinstall the flow restrictor by screwing in the retainer.

Push the wall mount spout onto the quick connect until it is flush against the wall.

Using the allen key provided, tighten the wall mount spout set screw.

Wall

Nipple

Flow Restrictor

Wall Mount Spout

Quick Connect

Flow Restrictor Retainer

Set Screw

Page 02