Santec 5670MO User Manual

PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE BEGINNING THE INSTALLATION.

COLLECTION

BIDET

This is a general installation instruction
for the following collections:
* MONZA
* NOVO

DO NOT TIGHTEN
HOSE

*** NOTE: SHUT OFF WATER SUPPLY BEFORE BEGINNING INSTALLATION***

VACUUM BREAKER INSTALLATION

- Remove complete trim from vacuum breaker valve.
Install bidet elbow into threaded outlet.
Insert gasket into bidet wye and thread onto bottom of vacuum breaker valve.
Remove black plastic lock nut, nylon slip washer and one black self-seating
china seal.
Insert diverter valve body up from below and reinstall black self-seating china seal,
nylon slip washer and black plastic lock nut being sure to tighten firmly by hand.

- Thread trim cylinder onto vacuum breaker valve and tighten firmly. Place handle on
top and secure with brass screw. Insert handle cap with arrow facing towards front
of bidet.

MINIMUM HOLE SIZE FOR THE SPOUT AND
HANDLE TRIM IS 1 ¼” AND MAXIMUM OF 1 ½”

DO NOT TIGHTEN
HOSE

Handle Cap
Screw

Handle

Trim Cylinder

Black plastic lock nut
White Nylon Slip Washer
Black Soft Seating China Seals

Black Soft Seating China Seals

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

PAGE 01

INSTALLATION INSTRUCTIONS

HANDLE TRIM INSTALLATION

HANDLE TRIM IS READY FOR DROP IN INSTALLATION.

DO NOT DISSASEMBLE.

- Remove the valve body mounting hardware from valve body.
Hot valve assembly “Red” to be mounted on left.
Cold valve assembly “Blue” to be mounted on right.

- Apply a ring of silicone caulking around the handle hole on bidet top.
DO NOT USE PLUMBERS' PUTTY, WHICH CAN DAMAGE FINISH.

- Slip valve through appropriate hole on top of bidet. Reinstall valve body mounting
hardware, fiber washer and valve body locknut. Align handles with respect to the bidet,
and tighten valve body locknut until secure.

- Aim outlet hoses towards bidet wye and attach securely to avoid leakage.

SPRITZER INSTALLATION

- Apply a ring of silicone caulking around hole designated for spritzer application.

DO NOT USE PLUMBERS' PUTTY, WHICH CAN DAMAGE FINISH.

- Drop spritzer through the appropriate hole in bidet, attach mounting hardware and
tighten to avoid leakage.

- Attach 24” hose from spritzer to bidet elbow and tighten to avoid leakage.

SANTEC SANTEC

Fiber gasket

Brass lock nut

INLET HOSEINLET HOSE

Aerator Housing

Aerator Basket

Aerator Washer

Aerator base

Black Rubber Washer

Metal Washer

Aerator Shank Lock Nut

Aerator Connecting hose

PAGE 02