Santec 5655MO User Manual
PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE BEGINNING THE INSTALLATION.
COLLECTION
ROMAN TUBS
WITH HANDHELD
This is a general installation instruction
for the following collections:
* MONZA
* NOVO
MINIMUM HOLE SIZE FOR THE SPOUT
AND HANDLE TRIM IS 1 ¼” AND
MAXIMUM OF 1 ½”
*** NOTE: SHUT OFF WATER SUPPLY BEFORE BEGINNING INSTALLATION***
INSPECTED BY
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
PAGE 01
S
I
L
I
C
O
N
E
SPOUT INSTALLATION
FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION.
AFTER FLUSHING, SHUT OFF BOTH SUPPLY LINES.
MINIMUM HOLE SIZE FOR THE SPOUT AND HANDLE TRIM IS 1-1/4”
AND MAXIMUM IS 1-1/2”
1. Remove the tee connector and spout mounting hardware from
quick connect shank being sure to leave on brass plate.
2. Apply a ring of silicone caulking around hole designated for spout.
DO NOT USE PLUMBERS’ PUTTY, WHICH CAN DAMAGE FINISH.
3. From the top of the deck, slip the quick connect shank through
the assigned spout hole.
4. Secure the quick connect shank by putting the washer and lock nut
back on the shank. Tighten the lock nut firmly.
5. From the top of the deck, slip the spout with the flange and flange
washer onto the quick connect shank top. Align the spout and tighten
the set screw with the Allen key provided.
6. Connect the tee connector to the spout shank.
S
I
L
I
C
O
N
E
COLLECTION
INSTALLATION INSTRUCTIONS
ROMAN TUB WITH HAND HELD
PAGE 02
Loading...