Santec 5620MO User Manual

COLLECTION

WIDESPREADS

This is a general installation instruction
for

the following collections:
PLEASE
BEFORE

READ THE INSTRUCTIONS COMPLETELY * NOVO

BEGINNING THE INSTALLATION.

Note: Important notice on Page 3!
Read carefully installation instruction step 4!

MINIMUM HOLE SIZE FOR THE SPOT AND
HANDLE

TRIM IS 1 ¼” AND MAXIMUM 1 ½”

HANDLE

NOT TIGHTEN HOSE

DO NOT TIGHTEN HOSE

DO

*** NOTE: SHUT OFF WATER SUPPLY BEFORE BEGINNING INSTALLATION***

INSPECTED BY ____________

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

Page 01

INSTALLATION INSTRUCTIONS

SPOUT INSTALLATION

COLLECTION

WIDESPREADS

Step 1.

• Remove the mounting hardware from the spout.

mounting
ha

rdware

Step 2.

• Apply a ring of silicone caulking around hole
designated for spout.

DO

NOT USE PLUMBERS’ PUTTY WHICH CAN

DAMAGE FINISH.

• Insert spout through center hole sink or
countertop.

E

NN

OO

CC

II

LL

II

SS

Step 3.

• From below, slip notched washer and gasket
over spout shank. Align notched washer and
gasket to allow pop-up rod to pass through.

• Attach wing nut and brass lock nut.

wa

sher

gasket

wing nut

brass lock nut

Step 4

.

• Secure spout by tightening the two screws on
wing nut.

• Thread tee connector and washer to spout
shank and tighten to seal

.

Page 02