Santec 4161BL User Manual
ESTATE SERIES BRITANI COLLECTION
24” TOWEL BAR
24” TOWEL BAR
MODEL NUMBER
4161BL _ _
LEFT BAR POST
MOUNTING
SCREW PLATE
SET SCREW
RIGHT BAR POST
MOUNTING
SCREW PLATE
MOUNTING SCREWS (4)
SET SCREW
DRY WALL TOGGLES(4)
ALLEN KEY
INSPECTED BY
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
PAGE 01
INSTALLATION INSTRUCTIONS
1- Take the trim parts off the box.
Place the trim parts against the assigned wall location.
Make sure the bar is leveled and the bar post positions are correct.
Mark with pencil the bar post flange positions and remove the trims.
2- Using the Allen key provided, remove the mounting screw plates from
the bar posts.
Press the mounting screw plate against bar post flange position on the
wall and mark the screw hole positions.
2a- INSTALLING ON WOODEN SURFACE
- For wooden surface, the mounting screw plates can be secured by
screwing the screws directly into the wall.
4161BL _ _
WALL
WOODEN SURFACE
post flange mark
mounting screw plate
DRY WALL SURFACE
2b- INSTALLING ON A DRYWALL
- Using a drill, pre-drill holes for the toggles.
- Fold the toggle’s leg and insert it into the wall.
- The mounting screw plate can be secured by screwing the screws
into the toggles.
2c- IF INSTALLING ON A SOLID/HARD SURFACE
- Measure the dimensions carefully.
- Using a drill, pre-drill the holes.
- Secure the mounting screw plate by screwing the screws into
the wall.
3- Press the left bar post against the mounting screw plate.
Align the bar post and secure it by tightening the set screw.
4- Insert the towel bar onto the secured bar post.
Press the right bar post onto the right mounting screw plate.
Insert the right side of the towel bar into the right bar post.
Align the right bar post and tighten the set screw firmly.
HARD SURFACE
5- Check both bar posts to make sure they are firmly secured.
If not, tighten the set screws with the Allen key.
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
05/03
PAGE 02
Loading...